Abstract:Ultra-thin flat heat pipes (UFHPs) are being explored as a potential thermal management solution to address the heat dissipation challenges of electronic devices. However, the ultra-thin process increases fluid flow resistance and reduces the heat transfer capacity, posing challenges for wick structure optimization. In this study, the effects of wick structure, vapor space, and fluid flow properties on the maximum heat transfer capacity are analyzed by a fluid flow model. Microgroove and microcolumn as wick structures are optimized, and the coupling effects between capillary pressure and fluid flow resistances are analyzed. The maximum heat transfer capacity and the corresponding optimal wick structure dimensions are determined by the vapor space friction and wick structure friction, which are calculated by structural friction coefficients (Sv and Sl) and fluid friction coefficients (Fv and Fl). The models of fluid flow friction chosen in previous literature are validated for accuracy by Fluent. When the height of the wick structure (h) or vapor space (H) increases, the optimal dimensionless wick structure height (h*) increases and decreases under a fixed porosity (epsilon), respectively. The optimal h* of microgroove decreases and that of microcolumn increases as the dimensionless spacing (l*) increases. When ethanol is used as the working fluid, the optimal h* of microgroove is 1.98 and the optimal h* of microcolumn is 0.48, under the condition of H = 0.3 mm, h = 0.15 mm, and epsilon = 0.5. This model also emphasizes the importance of working fluid properties on the design of the wick structure, and a higher value of Fl/Fv results in a lower optimal h*. Moreover, methanol and acetone exhibit higher heat transfer capacity compared with ethanol. This study aims to provide comprehensive design principles for optimizing UFHP heat transfer capacity.

Heat Transfer Performance of Micro Heat Pipe with Trapezium-grooved Wick

Thermal Performance of Heat Pipe with Different Micro-Groove Structures

Thermal Performance Analysis of Flat Heat Pipe with Graded Mini-Grooves Wick

Influence of Parallel and Trapezoidal Wick Structures to the Heat Transfer Capability of MHPs

A Review of Fabrication and Performance of Heat Pipes with Grooved Wick Structure

Thermal Performance of a Novel Flat Heat Pipe with Integral Micro-Grooved Wick for Energy Saving

Heat Transfer Capacity Optimization Design of Microgroove and Microcolumn in an Ultra-Thin Flat Heat Pipe

Thermal Characteristics of Heat Pipe with Axially Swallow-tailed Microgrooves

Thermal Characterization and Wick Optimization of Mini-Grooved Flat Heat Pipe for Electronics Cooling

A Study on Thermal and Hydraulic Performance of Ultra-Thin Heat Pipe with Hybrid Mesh-Groove Wick

Fabrication and Thermal Performance of Grooved-Sintered Wick Heat Pipe

Numerical and Experimental Investigation on Flat Heat Pipes With Integral Micro-grooved Wicks

Capillary and Thermal Performance Enhancement of Rectangular Grooved Micro Heat Pipe with Micro Pillars

Thermal Performance of a Large-Diameter Thin Flattened Heat Pipe with Novel Composite Wick Structure

Experimental study on thermal performance of ultra-thin heat pipe with a novel composite wick structure

Theoretical Analysis of Flat Heat Pipe with Graded-Porosity Wick Design

Experimental Investigation Of Micro/Nano Heat Pipe Wick Structures

Two different types of axially-grooved heat pipes and thermal performance comparison

A Mathematical Modeling Method and Experimental Investigation on Micro Heat Pipe with a Rectangle-grooved Wick Structure

Analysis of thermal characteristics of the heat pipes with segmented composite wicks

Experimental Study on Improving the Heat Transfer Performance of Large-Diameter Thin Flattened Heat Pipes