Abstract:Most large experiments for high energy particle physics are time measurement related, which requires a network supporting the broadcast communication in order to distribute the central clock to all endpoints. In addition to conventional solutions using a dedicated network just for time synchronization, several groups have proposed to embed the clock distribution network into the data stream network. Using only a single bidirectional fiber link for all network abilities, some special demands for these experiments, for example, limited space for hardware and long distance connection, can be satisfied. As the time resolution of detectors is constant increasing, the performance requirement for time synchronization based on this unified network is challenged. In this paper, we propose to use the state-of-art techniques on field programmable gate arrays (FPGA) and optical circulator based fiber connections to implement the unified network. By constructing a prototype system with three levels of hierarchical structure, the time synchronization performance is experimentally measured. Benefitting from the single wavelength fiber connection, high precision time-to-digital convertors (TDC), and phase interpolator (PI) components in FPGA SerDes transceivers, the clock offset of the distribution can be precisely measured and automatically compensated. Through multiple times of power-on and reset operation test, the clock synchronization accuracy over 5 km fiber connection is measured less than 40 ps. By employing the jitter cleaner devices in clock recovered endpoints, the recovered clock in different levels have independent jitter less than 4 ps. In addition, the achieved high performance is also proved to be insensitive to operation temperature and the connection distance. The test results show that the proposed implementation is a straight-forward and practical method with the high performance that can meet the requirements of most current large-scale experiments.

Power and time efficient clock synchronization in fiber channel

Performance Evaluation Of A Clock Synchronization Over Fiber Data Links For Large Experiments

A method to lower power in speed negotiation algorithm of fiber channel

A Clock Distribution and Synchronization Scheme over Optical Links for Large-Scale Physics Experiments

Performance Investigation on a Clock Distribution and Synchronization Scheme over DWDM Optical Links

Time and Frequency Injection into a Stabilized Fiber Link for Multi-clock Dissemination Network

Joint Transfer of Time and Frequency Signals and Multi-Point Synchronization Via Fiber Network

A High-Precision 2.5-Ps RMS Time Synchronization for Multiple High-Speed Transceivers in FPGA

Hardware-based Solution of Precise Time Synchronization for Networked Control System

A New Design for Precision Clock Synchronization Based on FPGA

Simultaneously Precise Frequency Transfer and Time Synchronization Using Feed-Forward Compensation Technique Via 120 Km Fiber Link

An Enhanced Method for Nanosecond Time Synchronization in IEEE 1588 Precision Time Protocol

A High Precision and Low Power Digital Synchronous Clock for Sensor Network

Design of Synchronization for High Speed Clock Distribution System

Fiber-based Multiple Access Timing Signal Synchronization Technique

A Fast Synchronization Scheme in High-Speed DS/FH System with Energy Detection

CRT-Based Clock Synchronization for Millimeter-Wave Communication with Asymmetric Propagation Delays

Fast-synchronization and Low-Timing-jitter Self-Clocking Concept for 160 Gbit/s Optical Time-Division Multiplexing Transmissions

The Implementation of IEEE 1588 Clock Synchronization Protocol Based on FPGA.

Fiber based time and frequency synchronization system

A Low-Complexity Power-Efficient Synchronization Scheme for Wireless Communication System