Abstract:NTP and IEEE1588 are two widely used protocols for clock synchronization in large distributed systems. NTP has its limitation that the synchronization accuracy is normally no better than 1 millisecond. The realization of the IEEE1588 system needs expensive components such as high-end microcontrollers or dedicated 1588 network hardware. This paper puts forward a method based on FPGA and short broadcast frames to realize a high level of synchronization accuracy between the master node clock and slave node clocks. When the master starts to synchronize, it sends a synchronous broadcast frame and memorizes this starting time in master clock. Each FPGA of the slave nodes, which needs to be synchronized, immediately returns a local node information frame as soon as it received the broadcast frame. FPGA in the master measures and memorizes the return moment of each node information frame precisely, and then calculates the correct value for each node. According to these correct values, slave nodes modify the local time to make it consistent with the master clock. The experiment result, which is done with LVDS data signal on shot wire 10 cm and long wire 55 m, shows that the synchronization accuracy is better than 200 nanoseconds, and the system can maintain the synchronization accuracy for a long time. The measured values of clock offset between master and slave node clock match well with the theoretical values. Experiments show that this design based on FPGA can save CPU resources and transmission bandwidth effectively for a large distributed system.

Design And Implementation Of Clock Network For Nanometer Fpga

Novel FPGA clock network with low latency and skew (abstract only).

FPGA based cellular neural network optimization: from design space to system.

A Multi-Level-Optimization Framework for FPGA-Based Cellular Neural Network Implementation.

A FPGA prototype design emphasis on low power technique.

Design of Multifunction Digital Clock Based on FPGA

Research On Circuit-Level Design Of High Performance And Low Power Fpga Interconnect Circuits In 28nm Process

A New Design for Precision Clock Synchronization Based on FPGA

Design of FPGA's High-Speed and Low-Power Programmable Interconnect

FPGA-based Digital Clock Design

Activity And Register Placement Aware Gated Clock Network Design

The Realization of Division and Multichannel Output of High-Frequency Clock Using the FPGA

Fpga Prototype Design Of Network On Chips

Design and Implementation of High-Precision Timing Module for NR Terminals Based on FPGA

The Implementation of IEEE 1588 Clock Synchronization Protocol Based on FPGA.

Two Novel Designs Of Multi-Phase Clocked Ultra-High Speed Time Counter On Fpga For Tdc Implementation

A Low Power Clock Network Placement Framework

A Flexible High Speed Star Network Based on Peer to Peer Links on FPGA

Clock Low Power Consumption Technique in SoC Design

Low Power Clock Buffer Planning Methodology in F-D Placement for Large Scale Circuit Design.

The Application of Automatic Gating Clock in SoC Clock Network