Abstract:In the direct laser deposition (DLD) process, it is common to employ constant processing parameters. The utilization of the constant parameters may lead to fluctuations in the dynamic evolution of the molten pool, primarily due to the intricate thermal effects involved, which will significantly impact the processing quality. To address this issue, this study proposed a closed-loop control approach that effectively modifies processing parameters in real time by targeting on the molten pool transient area. The type of the laser used in this study is a flat-top beam. Laser power, powder feeder rate, and scanning speed are the input variables of the study to control molten pool, considering the manufacturing system. The most suitable processing parameter to control the molten pool area was found to be the laser power by a set of orthogonal experiments, with a correlation coefficient of 0.706, and significance level of 0.002. Then, the dynamic response relationship between laser power and the molten pool area was mathematically characterized by a third-order transfer function model to simplify the complex physical model of the DLD process. Subsequently, a PID controller with a filtering coefficient and anti-windup compensation was chosen compared with the other controller. In the validation experiments, it was observed that the closed-loop processing group demonstrated improved stability in maintaining the molten pool transient area, with a notable decrease of 33.7% in variability compared to the open-loop processing group. As a result, the deposited layer of the closed-loop processing group exhibited a much more satisfying surface quality and heat affect zone than the open-loop group. This study established a third-order mathematical model of the dynamic molten pool and realized the optimization of deposition quality by controlling the molten pool transient area with an enhanced PID controller, providing a fundamental basis for improving the consistency of the direct laser deposition processing quality through the implementation of real-time feedback control of molten pool physics.

The Study of Modeling and Controlling for Evaporation Source in Vacuum Coating

Design of Self-Tuning SISO Partial-Form Model-Free Adaptive Controller for Vapor-Compression Refrigeration System

Study on Modeling and Intelligent Control of Wort Evaporating Process

Performance monitoring and assessment for PID controller

An Self-adapting Fuzzy Control of Pump Controlled Motor System under Extreme Conditions

Application of Self-tuning Fuzzy PID in Improvement of Dynamic Characteristics in Pump-Control-Motor System

Researches on stiction compensation in process control values

Modeling Of Two-Dimensional Dynamic Temperature Distribution Of A Lpcvd Process And Control Design By Mpc

The Fuzzy Control System on Target Power Supply of a Vacuum Film Coating Machine

Subcooling Control Method for the Adjustable Ejector in the Direct Expansion Solar Assisted Ejector-Compression Heat Pump Water Heater

Self-tuning-parameter Fuzzy PID Temperature Control in a Large Hydraulic System

The Fuzzy Model PID Optimization Control Designed for a Heat Exchange System in a Packed Tower

Application Study of Fuzzy Immune PID Algorithm in Temperature Control System

Study and Realization of Automatic Control for Variable Flow Heating Systems

Research on Auto Compensation of High Temperature Verification Furnace Based on Model Reference Adaptive Control

Temperature Precise Control in Hot Embossing Device

Fuzzy Model PID Optimization Control Applied in Nonlinear System

Optimum Control Strategy and Performance Simulation of a Constant Temperature and Humidity Air-conditioning System

Modeling and numerical analysis of PID-controlled phase-change transpiration cooling

Real-time closed-loop control of molten pool transient area in direct laser deposition via PID algorithm with enhanced robustness

Variable Discourse Fuzzy Control of VAV Air-Conditioning Terminal Unit