Abstract:In the tool orientation planning for five-axis sculptured surface machining, the geometrical constraints are usually considered. Actually, the effect of nongeometrical constraints on tool orientation planning is also important. This paper studied one nongeometrical constraint which was cutting force induced static deflection under different tool orientations, and proposed a cutter deflection model based on that. In the study of the cutting force, the undeformed chip thickness in filleted end milling was modeled by geometrical analysis and coordinate transformation of points at the cutting edge. In study of static flexibility of multi-axis machine, static flexibility of the entire machining system was taken into consideration. The multi-axis machining system was divided into the transmission axes-handle (AH) end and the cutting tool end. The equivalent shank method was developed to calculate the static flexibility of the AH end. In this method, static flexibility anisotropy of the AH end was considered, and the equivalent lengths of the AH end were obtained from calibration experiments. In cutter deflection modeling, force manipulability ellipsoid (FME) was applied to analyze the static flexibility of the AH end in arbitrary directions. Based on the synthetic static flexibility and average cutting force, cutter deflections were derived and estimated through developing program realization. The predicted results were compared with the experimental data obtained by machining 300 M steel curved surface workpiece, and a good agreement was shown, which indicated the effectiveness of the cutter deflection model. Additional experiments of machining flat workpiece were performed, and the relationship of cutter deflections and tool orientations were revealed directly. This work could be further employed to optimize tool orientations for suppressing the surface errors due to cutter deflections and achieving higher machining accuracy.

Complex Surface Machining: Thermo-mechanical Analysis for Error Prediction of Low-Rigidity Workpiece

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

An Efficient Algorithm for Calculations of Surface Errors in Peripheral Milling

Investigation on Cutting Force Modeling and Numerical Prediction of Surface Errors in Peripheral Milling of Thin-walled Workpiece

An Explicit Coupling Model for Accurate Prediction of Force-Induced Deflection in Thin-Walled Workpiece Milling

Numerical Prediction of Static Form Errors in the End Milling of Thin-Walled Workpiece

Surface form error prediction in five-axis flank milling of thin-walled parts

Analysis of Machining Deformation of Low-rigidity Parts based on Coupled Thermal-mechanical Model

Prediction of Surface Variation Field in Face Milling Via Finite Element Model Updating with Considering Force-Deformation Coupling

Surface Contour Error Model of Five-Axis Machining Considering Multifactor Coupling Effects

Rapid Prediction and Compensation Method of Cutting Force-Induced Error for Thin-Walled Workpiece

Determining the deformation and temperature history of material subjected to metal cutting

Estimation of Cutter Deflection Based on Study of Cutting Force and Static Flexibility

Multi-physics analytical modeling of the primary shear zone and milling force prediction

Effective Prediction Of Cutting Forces And Static Form Errors In Flexible End Milling

Milling Force Prediction Model for Five-Axis Machining of Freeform Surface Considering Mesoscopic Size Effect

Surface Topography Prediction Model in Milling of Thin-Walled Parts Considering Machining Deformation

A new cutting force prediction method in ball-end milling based on material properties for difficult-to-machine materials

Prediction Of Chip Formation In Machining With Restricted Contact Grooved Tools