Study on Real-Time Measuring Method of Concrete Pump Discharge

Huiyong Liu,Wei Li,Qing Zhao

DOI: https://doi.org/10.1109/ICECT.2009.147

2009-01-01

Abstract:A noise deduction method for image data by using Centroid Neural Network (CNN) is proposed in this paper. The spatial constraints are applied to Neural Network(CNN) algorithm to reduce noise in image data. The proposed algorithm incorporates a novel ...

What problem does this paper attempt to address?

Two-Stream Boundary-Aware Neural Network for Concrete Crack Segmentation and Quantification

Gaoyang Liu,Wei Ding,Jiangpeng Shu,Alfred Strauss,Yuanfeng Duan

DOI: https://doi.org/10.1155/2023/3301106

2023-01-01

Abstract:Cracks can be important performance indicators for determining damage processes in new and existing concrete structures. In recent years, deep convolutional neural networks (CNNs) have shown great potential in automatic crack detection and segmentation. However, most of the current CNNs tend to lose high-resolution details and, therefore, lead to blurry object boundaries; this results in poor performance for crack images with complex backgrounds in engineering structures. This study proposes a two-stream boundary-aware crack segmentation (BACS) network that combines semantic image segmentation with semantically informed edge detection explicitly. Firstly, a high-resolution network (HRNet) is utilized in the segmentation branch for strong high-resolution representations through repeatedly conducting multi-scale fusions across parallel convolutions. Furthermore, an edge branch is utilized for preserving fine-grained details of elongated thin cracks, which adopts a modified dynamic feature fusion (DFF) network to produce more accurate and sharper edge predictions. The proposed method is evaluated using a dataset of 1,892 images for three different scenarios. The results show that the mean intersection-over-union (mIoU) scores reach 79.26%, 68.74%, and 70.31% for pure crack, complex background, and variable-width scenarios, respectively. In addition, crack width quantification is performed to validate the accuracy in terms of engineering practice. The BACS achieves high accuracy with an average absolute error of 0.0992 mm, which corresponds to approximately two pixels in the images. In conclusion, the study provides an effective solution for the crack segmentation task, especially for the variable-width scenario, providing an accurate data foundation for the digital twin of concrete structures.
SSB Modulation of the Ultrasonic Carrier for a Parametric Loudspeaker

Youxiang Wang,Xuesheng Li,Limei Xu,Leon Xu

DOI: https://doi.org/10.1109/ICECT.2009.81

2009-01-01

Abstract:A noise deduction method for image data by using Centroid Neural Network (CNN) is proposed in this paper. The spatial constraints are applied to Neural Network(CNN) algorithm to reduce noise in image data. The proposed algorithm incorporates a novel ...
Research on Measuring Method of Concrete Pump Discharge Based on Ultrasonic Doppler Method

LIU Hui-yong,LI Wei,LIN Yong-gang,GU Da-qiang,ZHAO Qing

DOI: https://doi.org/10.3969/j.issn.1000-4858.2008.04.008

2008-01-01

Abstract:The measurement of the real-time discharge of concrete pump has been an engineering practical application technical matter.Based on the principle of the travel time difference method of the ultrasonic,the measurement method of concrete pump discharge was presented,the mathematic model of concrete pump discharge was established,the hardware composition and the software structure of the measurement system were illustrated,and some factors which influence the measuring accuracy were analyzed.
Measuring Method of Concrete Pump Discharge Based on Pressure

Huiyong Liu,Wei Li,Qing Zhao

DOI: https://doi.org/10.1109/robio.2009.4913227

2007-01-01

Abstract:The measuring of the real-time discharge of concrete pump is an issue which must be solved urgently. The mathematic model of the concrete pump discharge is established based on the working principle of concrete pump. The measuring method based on pressure is put forward. By measuring and analyzing the pressure in the material cylinder, calculating the real-time pumping efficiency, the real-time discharge of concrete pump could be measured. The preliminary experiment indicates that the measuring method based on pressure has high precision and the measuring error of which is less than 2%.
A Novel Composite Camera Calibration Method and its Application in Vehicle Impact Experiment

Xiang Liu,Qianmin Su,Zibing Deng

DOI: https://doi.org/10.1109/ICECT.2009.87

2009-01-01

Abstract:A noise deduction method for image data by using Centroid Neural Network (CNN) is proposed in this paper. The spatial constraints are applied to Neural Network(CNN) algorithm to reduce noise in image data. The proposed algorithm incorporates a novel ...
Theoretical Research on Measuring Method of Concrete Pump Discharge

LIU Huiyong,LI Wei,LIN Yonggang,GU Daqiang,SONG Ruiyin

DOI: https://doi.org/10.3969/j.issn.1000-4858.2007.04.008

2007-01-01

Abstract:The principle of rheology and its application in pumping concrete were introduced.The pumping concrete flowage in transfer pipeline was analyzed.The plug flow occurs when concrete is pumped through transfer pipeline.The working process of concrete pumping was expounded,and the relationship between the plug flow and concrete pump discharge was analyzed.The discharge measuring method based on pressure was proposed,which measures the concrete pump discharge by means of measuring the pressure in concrete cylinder of concrete pump,and some key problems which implement the measuring method were discussed.
Measuring Method of Concrete Pump Discharge Based on Pumping Pressure

刘会勇,李伟,林勇刚,顾大强,宋瑞银

DOI: https://doi.org/10.3901/jme.2009.05.165

2009-01-01

Abstract:The characteristics of current measuring methods of concrete pump discharge are analyzed, and the deficiency in measuring accuracy of these methods is pointed out. The mathematic model of concrete pump discharge is established on the basis of working principle of the concrete pump, and it is pointed out that the key of the measurement of concrete pump discharge is the real-time pumping efficiency factor. The factors which effect the measurement of concrete pump discharge and the relationship between the material cylinder and the master cylinder are analyzed, and the measuring method based on pumping pressure is proposed. The actual discharge of concrete pump is calculated by directly measuring the pressure in the master cylinder of concrete pump, analyzing the tendency of the pressure change in the master cylinder, and computing the real-time pumping efficiency factor. The experiment indicates that the measuring method based on pumping pressure has relatively high measuring accuracy.
Cracklab: A high-precision and efficient concrete crack segmentation and quantification network

Zhenwei Yu,Yonggang Shen,Zhilin Sun,Jiang Chen,Wu Gang

DOI: https://doi.org/10.1016/j.dibe.2022.100088

IF: 5.563

2022-01-01

Developments in the Built Environment

Abstract:A deep learning model named Cracklab for pixel level segmentation and measurement of concrete cracks is proposed. Cracklab excels at handling cracks at image edges and enhances scale adaptability, and it reduces physical occupation and increases efficiency by pruning. A crack database containing 685 images collected from complex scenes is established, with resolution ranging from 1024 to 2048 pixels. During training, focal loss is used to improve the recognition effect of complex background images. The results show that our method is more effective and accurate in detecting and quantifying cracks. Cracklab performed better in inference and comparative experiments, with mIoU at least 0.114 ahead and detection speeds 3.9 times faster compared to works that did not include pruning and scale adaptation. The proposed improved medial axis transform method has an error of 2.09 pixels at the maximum crack width, which is 19.6% lower than another work using distance transform method.
Image-Based Concrete Crack Detection Using Convolutional Neural Network and Exhaustive Search Technique

Shengyuan Li,Xuefeng Zhao

DOI: https://doi.org/10.1155/2019/6520620

IF: 1.843

2019-01-01

Advances in Civil Engineering

Abstract:Crack detection is important for the inspection and evaluation during the maintenance of concrete structures. However, conventional image-based methods need extract crack features using complex image preprocessing techniques, so it can lead to challenges when concrete surface contains various types of noise due to extensively varying real-world situations such as thin cracks, rough surface, shadows, etc. To overcome these challenges, this paper proposes an image-based crack detection method using a deep convolutional neural network (CNN). A CNN is designed through modifying AlexNet and then trained and validated using a built database with 60000 images. Through comparing validation accuracy under different base learning rates, 0.01 was chosen as the best base learning rate with the highest validation accuracy of 99.06%, and its training result is used in the following testing process. The robustness and adaptability of the trained CNN are tested on 205 images with 3120 × 4160 pixel resolutions which were not used for training and validation. The trained CNN is integrated into a smartphone application to mobile more public to detect cracks in practice. The results confirm that the proposed method can indeed detect cracks in images from real concrete surfaces.
Study on Analytical Noise Propagation in Convolutional Neural Network Methods Used in Computed Tomography Imaging

Guo Xiao-Yue,Zhang Li,Xing Yu-Xiang

DOI: https://doi.org/10.1007/s41365-022-01057-3

2022-01-01

Abstract:Neural network methods have recently emerged as a hot topic in computed tomography(CT)imaging owing to their powerful fitting ability;however,their potential applications still need to be carefully studied because their results are often difficult to interpret and are ambiguous in generalizability.Thus,quality assessments of the results obtained from a neural network are necessary to evaluate the neural network.Assessing the image quality of neural networks using traditional objective measurements is not appropriate because neural networks are nonsta-tionary and nonlinear.In contrast,subjective assessments are trustworthy,although they are time-and energy-con-suming for radiologists.Model observers that mimic sub-jective assessment require the mean and covariance of images,which are calculated from numerous image sam-ples;however,this has not yet been applied to the evalu-ation of neural networks.In this study,we propose an analytical method for noise propagation from a single projection to efficiently evaluate convolutional neural networks(CNNs)in the CT imaging field.We propagate noise through nonlinear layers in a CNN using the Taylor expansion.Nesting of the linear and nonlinear layer noise propagation constitutes the covariance estimation of the CNN.A commonly used U-net structure is adopted for validation.The results reveal that the covariance estimation obtained from the proposed analytical method agrees well with that obtained from the image samples for different phantoms,noise levels,and activation functions,demon-strating that propagating noise from only a single projec-tion is feasible for CNN methods in CT reconstruction.In addition,we use covariance estimation to provide three measurements for the qualitative and quantitative perfor-mance evaluation of U-net.The results indicate that the network cannot be applied to projections with high noise levels and possesses limitations in terms of efficiency for processing low-noise projections.U-net is more effective in improving the image quality of smooth regions com-pared with that of the edge.LeakyReLU outperforms Swish in terms of noise reduction.
A Cnn-Based Depth Estimation Approach With Multi-Scale Sub-Pixel Convolutions And A Smoothness Constraint

Shiyu Zhao,Lin Zhang,Ying Shen,Yongning Zhu

DOI: https://doi.org/10.1007/978-3-030-20890-5_24

2018-01-01

Abstract:Depth estimation from a single image is of paramount importance in various vision tasks, such as obstacle detection, robot navigation, 3D reconstruction, etc. However, how to get an accurate depth map with clear details and a fine resolution remains an unresolved issue. As an attempt to solve this problem, we propose a novel CNN-based approach, namely MSCNNS, which involves multi-scale sub-pixel convolutions and a neighborhood smoothness constraint. Specifically, MSCNNS makes use of sub-pixel convolutions which fuse multi-scale features from different branches of the network to retrieve a high resolution depth map with fine details of the scene. Furthermore, MSCNNS incorporates a neighborhood smoothness regularization term to make sure that spatially closer pixels with similar features would have close depth values. The effectiveness and efficiency of MSCNNS have been corroborated through extensive experiments conducted on benchmark datasets.
Pixel-level Detection and Measurement of Concrete Crack Using Faster Region-Based Convolutional Neural Network and Morphological Feature Extraction

Shengyuan Li,Xuefeng Zhao

DOI: https://doi.org/10.1088/1361-6501/abb274

2021-01-01

Abstract:Crack characteristics are important indicator reflecting the safety status of concrete structures. Current pixel-level crack detection methods generally used several semantic segmentation networks. However, those semantic segmentation network-based methods need expensive pixel-level annotation of training and test images. To overcome these problems, this paper proposed a pixel-level detection and measurement of concrete crack using a faster region-based convolutional neural network (faster R-CNN) and morphological feature extraction techniques. The faster R-CNN is trained on a database including 4861 crack images, and, consequently, records with 90.91% average precision (AP). The trained faster R-CNN is used to detect cracks from backgrounds of images, and then the morphological feature extraction techniques are used to segment pixel-level cracks and measure crack maximum widths and lengths. Comparative study is conducted to examine the performance of the proposed approach using a fully convolutional network (FCN)-based method. The results show that the proposed method substantiates quite performances and can indeed detect and measure concrete crack in realistic situations.
Automatic Crack Detection and Measurement of Concrete Structure Using Convolutional Encoder-Decoder Network

Shengyuan Li,Xuefeng Zhao

DOI: https://doi.org/10.1109/access.2020.3011106

IF: 3.9

2020-01-01

IEEE Access

Abstract:The detection and measurement of crack at pixel level is a challenge to existing methods. To overcome this challenge, this paper proposes a convolutional encoder-decoder network (CedNet) to detect crack from image, and the maximum widths and orientations of cracks are measured using image post-processing techniques. To realize this, a database including 1800 crack images (with 761×569 pixel resolution) taken from concrete structures is built. Then the CedNet is designed, trained and validated using the built database. The validating results show 98.90% accuracy, 93.58% precision, 94.73% recall, 93.18% F-measure, 87.23% intersection over union (IoU) of crack and 98.82% IoU of background. Subsequently, the robustness and adaptability of the trained model is tested. To measure true maximum widths and orientations of cracks, a laboratory experiment is carried out to calibrate a relation between ratio (pixel distance / real distance) and field of view (camera's view range on concrete surface included in image) and distance from the smartphone to concrete surface. In the post-processing techniques, the perspective transformation is employed to correct distorted images caused by the existence of the oblique angles between the smartphone and concrete surfaces. Then the maximum widths and orientations of cracks in predicted results are measured respectively using the Euclidean distance transformation and least squares principle. As comparison, two existing deep learning-based crack detection and measurement method are used to examine the performance of the proposed approach. The comparison results show that the proposed method substantiates quite good performance to detect cracks and measure maximum widths and orientations of cracks in our database.
Discrimination of Mining Microseismic Events and Blasts Using Convolutional Neural Networks and Original Waveform

Dong Long-jun,Tang Zheng,Li Xi-bing,Chen Yong-chao,Xue Jin-chun

DOI: https://doi.org/10.1007/s11771-020-4530-8

2020-01-01

Journal of Central South University

Abstract:Microseismic monitoring system is one of the effective methods for deep mining geo-stress monitoring. The principle of microseismic monitoring system is to analyze the mechanical parameters contained in microseismic events for providing accurate information of rockmass. The accurate identification of microseismic events and blasts determines the timeliness and accuracy of early warning of microseismic monitoring technology. An image identification model based on Convolutional Neural Network (CNN) is established in this paper for the seismic waveforms of microseismic events and blasts. Firstly, the training set, test set, and validation set are collected, which are composed of 5250, 1500, and 750 seismic waveforms of microseismic events and blasts, respectively. The classified data sets are preprocessed and input into the constructed CNN in CPU mode for training. Results show that the accuracies of microseismic events and blasts are 99.46% and 99.33% in the test set, respectively. The accuracies of microseismic events and blasts are 100% and 98.13% in the validation set, respectively. The proposed method gives superior performance when compared with existed methods. The accuracies of models using logistic regression and artificial neural network (ANN) based on the same data set are 54.43% and 67.9% in the test set, respectively. Then, the ROC curves of the three models are obtained and compared, which show that the CNN gives an absolute advantage in this classification model when the original seismic waveform are used in training the model. It not only decreases the influence of individual differences in experience, but also removes the errors induced by source and waveform parameters. It is proved that the established discriminant method improves the efficiency and accuracy of microseismic data processing for monitoring rock instability and seismicity.
Application of light-weighted CNN for diagnosis of internal concrete defects using hammering sound

Chi Lu,Yoshimi Sonoda

DOI: https://doi.org/10.1080/10589759.2023.2301032

2024-01-06

Nondestructive Testing And Evaluation

Abstract:In the past, diagnoses of the internal defects of ageing concrete members by sound tests have relied on the ability and experience of the inspector. However, with the development of deep neural networks, building diagnosis tools without the subjective judgements of humans is feasible. In this study, sound samples are collected from a tapping sound test on concrete slab specimens with internally embedded artificial defects. Spectrograms are generated from the sound samples and used to train a light-weighted convolutional neural network (CNN). Thereafter, the performance of the proposed CNN models at diagnosing the defects of the concrete slabs are examined and compared with convolutional autoencoder (CAE) and support vector regression (SVR). All the models performed well at distinguishing between healthy and defective concrete. Whereas noise can impair the performance of CAE and SVR, CNN is less affected, particularly when classifying sound samples with distinctive features. CNN also has other advantages: the physical area of the artificial defect can be output directly from CNN, and CNN performance is also less affected by the depth of the artificial defect and the rebar embedded in the concrete. At increased depths, the CNN is still able to identify the defect area.

materials science, characterization & testing
Crack Detection of Concrete Based on Improved CenterNet Model

Huaiqiang Kang,Fengjun Zhou,Shen Gao,Qizhi Xu

DOI: https://doi.org/10.3390/app14062527

2024-01-01

Abstract:Cracks on concrete surfaces are vital factors affecting construction safety. Accurate and efficient crack detection can prevent safety-related accidents. Using drones to photograph cracks on a concrete surface and detect them through computer vision technology has the advantages of accurate target recognition, simple practical operation, and low cost. To solve this problem, an improved CenterNet concrete crack-detection model is proposed. Firstly, a channel-space attention mechanism is added to the original model to enhance the ability of the convolution neural network to pay attention to the image. Secondly, a feature selection module is introduced to scale the feature map in the downsampling stage to a uniform size and combine it in the channel dimension. In the upsampling stage, the feature selection module adaptively selects the combined features and fuses them with the output features of the upsampling. Finally, the target size loss is optimized from a Smooth L1 Loss to IoU Loss to lessen its inability to adapt to targets of different sizes. The experimental results show that the improved CenterNet model reduces the FPS by 123.7 Hz, increases the GPU memory by 62 MB, increases the FLOPs by 3.81 times per second, and increases the AP by 15.4% compared with the original model. The GPU memory occupancy remained stable during the training process and exhibited good real-time performance and robustness.
Real-time monitoring for vibration quality of fresh concrete using convolutional neural networks and IoT technology

Dong Wang,Bingyu Ren,Bo Cui,Jiajun Wang,Xiaoling Wang,Tao Guan

DOI: https://doi.org/10.1016/j.autcon.2020.103510

IF: 10.3

2021-03-01

Automation in Construction

Abstract:<p>Vibration quality is critical to ensure the concrete strength, which directly affects the long-term safe operation of concrete structures. The vibration duration and vibration depth are key parameters to guarantee vibration quality. However, traditional manual inspection on concrete surface to judge the vibration duration and estimation of vibration depth is subjective and unreliable. Moreover, existing studies monitor the vibration duration based on the knowledge from prior experiments, ignoring the influence of concrete heterogeneity. Thus, a real-time monitoring method for vibration quality of fresh concrete based on ResNet with 50 layers (ResNet-50) and Internet of Things (IoT) technology is proposed. The IoT-based monitoring framework is proposed to measure vibration depth and capture concrete surface image (CSI). A three-category classification model of CSI is established based on fine-tuned ResNet-50 model using a self-constructed dataset with 15,006 images to determine proper vibration duration. A large-scale hydraulic engineering application verifies the performance of the proposed method.</p>

construction & building technology,engineering, civil
Detection of Bughole on Concrete Surface with Convolutional Neural Network

Gang Yao,Fujia Wei,Yang,Yujia Sun

DOI: https://doi.org/10.1109/crc.2019.00045

2019-01-01

Abstract:Bugholes are surface imperfections found on the surface of concrete structures. The presence of bugholes not only affects the appearance of the concrete structure, but may even affect the durability of the structure. Traditional measurement methods are carried out by in-situ manual inspection, and the detection process is time-consuming and difficult. Although various image processing technologies (IPT) have been implemented to detect defects in the appearance quality of concrete to partially replace manual on-site inspections, the wide variety of realities may limit the widespread adoption of IPTs. In order to overcome these limitations, this paper proposes a detector based on Convolutional Neural Network (CNN) to recognizing bugholes on concrete surfaces. The proposed CNN was trained on 4,000 images and tested on 800 images which were not used for training and validation; the recognition accuracy reached 94.37%. The image test results and comparative study with traditional methods showed that the proposed method exhibits excellent performance and indeed can detect the bugholes on the concrete surfaces under actual conditions.
A Patch Based Denoising Method Using Deep Convolutional Neural Network for Seismic Image

Yushu Zhang,Hongbo Lin,Yue Li,Haitao Ma

DOI: https://doi.org/10.1109/access.2019.2949774

IF: 3.9

2019-01-01

IEEE Access

Abstract:The deep convolutional neural networks (CNNs) have been shown excellent performances for image denoising. However, the denoising CNN model trained with a specific noise level cannot deal with the images which have spatiotemporally variant random noise and low signal-to-noise ratio (SNR), such as seismic images. To this end, we propose a patch-based denoising CNN method, namely PDCNN. Specifically, we cluster the overlapping patches of noisy image into K classes where the image patches have close noise levels in each class, and then choose a suitable model for denoising the corresponding class from a series of well-trained CNN models. By embodying the structural statistics, we propose a CNN model selection criterion with a structural-dependent parameter. In contrast to the manual model selection process, the more accurate CNN model is chosen automatically and effectively. The capability of the PDCNN is demonstrated on synthetic and field seismic images. Experimental results show that the proposed method largely benefits from using multiple CNN models to jointly denoise, and leads to the satisfactory denoising performance in spatiotemporally variant seismic random noise reduction and structural signal preservation.
Intelligent Analysis of Hydraulic Concrete Vibration Time Based on Convolutional Neural Network

Hao Liu,Chengzhao Liu,Jiake Fu,Chenzhe Ma,Ye Zhang,Yumeng Lei

DOI: https://doi.org/10.1155/2023/5530102

IF: 1.843

2023-10-09

Advances in Civil Engineering

Abstract:The vibrating of concrete is one of the most important procedures that directly determines the quality of construction projects. The concrete vibration quality in field construction is mainly judged by the experience of workers, lacking quantitative indicators, and necessary supervision. However, the lack of research about concrete vibration quality led to these problems are still existing. There are some methods are proposed that are too difficult, or too expensive to use in field construction. Combined with the pouring project of Jianquan Pumped Storage Power Station in Yunyang, China, this research developed an intelligent detection system for concrete vibration time. The system took the convolutional neural network as the basic framework, and divided the concrete vibration process into three different states: vibrating, not vibrating, and no vibration tube, realized the concrete vibration time through the analysis of concrete vibration video data. The detection of concrete vibration process video with multiple stages in the actual project shows that the detection error of the system for each state is kept within 1 s, the accuracy is high, which can meet the quality management requirements of the construction process. The system can be quickly deployed to the construction site by using mobile phones, cameras, and other common equipment. It has the advantages of simple frame structure, low hardware requirements, and accurate detection results. In addition, the current system training process is only for the concrete pouring process of Jianquan Power Station, and the training sample can be further expanded in the future to enhance the applicability and accuracy of the system in other engineering applications in order to play a better role.

construction & building technology,engineering, civil

Study on Real-Time Measuring Method of Concrete Pump Discharge

Two-Stream Boundary-Aware Neural Network for Concrete Crack Segmentation and Quantification

SSB Modulation of the Ultrasonic Carrier for a Parametric Loudspeaker

Research on Measuring Method of Concrete Pump Discharge Based on Ultrasonic Doppler Method

Measuring Method of Concrete Pump Discharge Based on Pressure

A Novel Composite Camera Calibration Method and its Application in Vehicle Impact Experiment

Theoretical Research on Measuring Method of Concrete Pump Discharge

Measuring Method of Concrete Pump Discharge Based on Pumping Pressure

Cracklab: A high-precision and efficient concrete crack segmentation and quantification network

Image-Based Concrete Crack Detection Using Convolutional Neural Network and Exhaustive Search Technique

Study on Analytical Noise Propagation in Convolutional Neural Network Methods Used in Computed Tomography Imaging

A Cnn-Based Depth Estimation Approach With Multi-Scale Sub-Pixel Convolutions And A Smoothness Constraint

Pixel-level Detection and Measurement of Concrete Crack Using Faster Region-Based Convolutional Neural Network and Morphological Feature Extraction

Automatic Crack Detection and Measurement of Concrete Structure Using Convolutional Encoder-Decoder Network

Discrimination of Mining Microseismic Events and Blasts Using Convolutional Neural Networks and Original Waveform

Application of light-weighted CNN for diagnosis of internal concrete defects using hammering sound

Crack Detection of Concrete Based on Improved CenterNet Model

Real-time monitoring for vibration quality of fresh concrete using convolutional neural networks and IoT technology

Detection of Bughole on Concrete Surface with Convolutional Neural Network

A Patch Based Denoising Method Using Deep Convolutional Neural Network for Seismic Image

Intelligent Analysis of Hydraulic Concrete Vibration Time Based on Convolutional Neural Network