Abstract:Single Point Incremental Forming (SPIF) is an emerging sheet metal forming process which has been used in the prototype production of complex geometries. The geometric inaccuracies and quality of formed parts are the major obstructions in commercialization of SPIF process. The aim of presented work is to study this hindrance using experimental and numerical investigation on Aluminum Alloy 2210-O. Parametric optimization is done using Response Surface Methodology (RSM) for quality factor (surface roughness) and geometric accuracy (Maximum wall angle) while minimizing thickness reduction and forming time. For this purpose, three experimental setups were designed in this study, using tool types and tool paths. During investigation, the interaction and main effects of process parameters, viz. feed rate, spindle speed, and step increment are evaluated on surface roughness ( R a ), maximum wall angle , % thickness reduction (% TR), and forming time ( T ) using ANOVA method. Results showed that among all the parameters of SPIF process, step increment is the most significant parameter for both forming paths using ball end and flat end tool. The comparative analysis of this study suggested that the ball end tool using the bidirectional path was better than the other setups. Furthermore, the results revealed that the ball end tool using a spiral path was better in desirability achievement (73%) as compared to the flat end tool using a spiral path (71.2%). The findings of this study are beneficial in paving a path for optimization of the SPIF process for an industrial-scale production of Al alloy AA 2219-O with desired characteristics.

Preform Tool Shape Optimization and Redesign Based on Neural Network Response Surface Methodology

The Optimum Preform Design and Redesign Based on Neural Network Response Surface Methodology

Parameters Optimization of Tailor Welded Blank Forming Process

Shape Optimisation of Preform Design for Precision Close-Die Forging

Preform design optimization for forging process based on the topological approach

Evolutionary forging preform design optimization using strain-based criterion

Optimization of Extrusion Part Based on Moving Least Squares Response Surface Methodology

Numerical optimization on hot forging process of connecting rods based on RSA with experimental verification

Preform cross-section shape optimization design for tube hydroforming with low pressure

Closed Die Forging Preform Shape Design Using Isothermal Surfaces Method

Design and optimization of turbine blade preform forging using RSM and NSGA II

Parametric Optimization on Single Point Incremental Forming of Aluminum Alloy AA 2219-O using Response Surface Methodology

A 6-Sigma Robust Optimization Method for Stamping Forming of Automobile Covering Parts Based on Residual Error and Radial Basis Interpolation

Research on Optimal Design of Preform of Forging Based on Evolutionary Structural Optimization

Optimization of Metal-Forming Process Via a Hybrid Intelligent Optimization Technique

Optimization of preform of high-speed multi-stage forging based on surrogate model methodology

Optimization of Drawbead Design in Sheet Forming Using One Step Finite Element Method Coupled with Response Surface Methodology

Multiobjective Optimization Based on Response Surface Model and Its Application to Engineering Shape Design

A New Approach of Die Shape Optimization for Sheet Metal Forming Processes

A new approach of intelligent design and optimization for shell nosing

Optimization of Pre-Form Shapes by Response Surface Methodology for Hydro-Forming of 780 MPa Torsion Beam