Abstract:Stirling-type pulse tube cryocoolers (SPTCs) working at liquid-helium temperatures are attractive in space applications because they have advantages of high reliability, compactness, etc. However, the refrigeration efficiency is as low as 0.5% of Carnot efficiency or less. A method of increasing the cross-sectional area of the regenerator at the colder part is proposed in this paper, so as to reduce the heat-associated enthalpy flow at the cold end and improve the performance of the regenerative refrigerators at liquid-helium temperatures, and it is verified through experiments for the first time. Two kinds of variable cross-sectional structures are used in the experiments, which both increase the volume of the regenerator at the colder part. The no-load temperature of the refrigerator reaches 3.87 K, which is about 0.14 K lower than that of the refrigerator with a uniform cross-sectional regenerator under the same working conditions, and the coefficient of performance (COP) is increased by 66% at 4.2 K, and the precooling temperature is 16 K in this case. Theoretical analyses show that there are several reasons for reducing the heat-associated enthalpy flow at the cold end, including: (1). increase of the heat transfer area between the working fluid and the matrix; (2). increase of the total heat capacity of the matrix at the cold end. It is found that the lower the refrigeration temperature, the more serious the real gas effect, resulting in a more significant improvement. However, the increase in the cross-sectional area causes some side effects of reducing both the impedance of the regenerator and the flow rate of the working gas, resulting in a lower heat transfer coefficient. A smaller benefit is got as the refrigeration temperature rises, and the improvement of the COP tends to vanish at about 6 K. It is also found that the performance improvement is more significant when the regenerative efficiency is lower. This new method should provide a reference for further improving the performance of the regenerative refrigerator at liquid-helium temperatures.

Thermal Performance of a 4 K High-frequency Pulse Tube Cryocooler with Different Working Fluids

EXPERIMENTAL RESEARCH OF THERMAL-COUPLED VERSION HIGH FREQUENCY TWO-STAGE PULSE TUBE COOLER

Performance of a Pulse Tube Cryocooler with Two Separate Stages using 3He in the Second Stage

Performance of a pulse tube cryocooler with two separate stages using He-3 in the second stage

Performance analysis of a micro-scale pulse tube cryocooler based on optical fiber regenerator

Study on a High Frequency Pulse Tube Cryocooler Capable of Achieving Temperatures below 4 K by Helium-4

Investigation Of Helium And Nitrogen Mixtures In A Pulse Tube Refrigerator

A Three-Stage Stirling Pulse Tube Cryocooler Reached 4.26 K with He-4 Working Fluid

Attaining the liquid helium temperature with a compact pulse tube cryocooler for space applications

Performance improvement of a pulse tube cryocooler with a single compressor through cascade utilization of cold energy

Investigation on Phase Shifting for a 4 K Stirling Pulse Tube Cryocooler with He-3 As Working Fluid

A three-stage Stirling pulse tube cryocooler operating below the critical point of helium-4

The thermal performance model of a 105 mW@4.41 K 4 He Joule-Thomson cryocooler designed for space applications

Varying the Cross-Sectional Area of the Regenerator for Improving the Refrigeration Efficiency at Liquid-Helium Temperatures

High Frequency Characteristics of Pulse Tube Cryocooler at Liquid Helium Temperature

Performance of a precooled 4 K Stirling type high frequency pulse tube cryocooler with Gd2O2S

An Experimental Investigation on Pulse Tube Refrigeration with Mixture Fluids

120 Hz Pulse Tube Cryocooler For Fast Cooldown To 50 K

Cfd Modeling And Experimental Verifications Of A Four-Stage Stirling-Type Pulse Tube Cryocooler

Operating Characteristics of a Three-Stage Stirling Pulse Tube Cryocooler Operating Around 5 K

A Critical Review of Liquid Helium Temperature High Frequency Pulse Tube Cryocoolers for Space Applications