Abstract:The conversion of plastic waste to high value-added aromatics such as benzene, toluene, ethylbenzene, xylene (BTEX) through catalytic pyrolysis offers huge untapped opportunities for resource recovery and plastic pollution control. Economical equipment configuration, operation and maintenance, high safety factor, high efficiency, stability, low-cost catalyst synthesis design, high yield, high selectivity of products are the key to the practical application of catalytic pyrolysis. In present study, low-cost kieselguhr based ZSM-5 was synthesized by one-pot in situ hydrothermal method using kieselguhr as silicon-aluminum source. During the depolymerization-recrystallization process, the selective growth and self-assembly of crystals on the a, c axis formed large-grain of ZSM-5 with extended straight channels and maximized sinusoidal channels. Native transition and alkaline-earth metals were coordinated to the acidic sites of the silica-aluminum skeleton, achieving tunability of the catalyst acidity. Catalytic pyrolysis of mask waste at 550 °C in a fixed bed reactor achieved the highest pyrolysis oil yield (44.3 wt%) and BTEX selectivity (77.1 %) with p -xylene as the dominant xylene product (78.2 %). After 3 cycles of long-life experiments, the BTEX selectivity of the catalyst remained at 65.1 %, which is higher than that of commercial ZSM-5 (54.9 %), indicating the superior use stability. Molecular dynamics simulations showed that the excellent shape-selectivity of the catalyst is based on its unique pore structure, which facilitates the diffusion and transport of appropriately sized intermediates/products within the structure, resulting in products with advantageous distributions. This study proposes an efficient and feasible plastic closed-loop strategy for green upgrading of medical waste to high value-added chemicals.

Catalytic recycling of medical plastic wastes over La0.6Ca0.4Co1–Fe O3− pre-catalysts for co-production of H2 and high-value added carbon nanomaterials

Temperature-dependent highly active LaCaMgAl2O4 catalyst effect on carbon nanomaterial and hydrogen generation from polymethyl methacrylate plastic

Catalytic pyrolysis of film waste over Co/Ni pillared montmorillonites towards H2 production

Catalytic pyrolysis of FeAlO x and medical plastic waste: Kinetic, slag conversion, and gas emission patterns

In-situ exsolution of Fe-Ni alloy catalysts for H2 and carbon nanotube production from microwave plasma-initiated decomposition of plastic wastes

Catalytic co-pyrolysis of waste tea residue and waste plastics to carbon nanomaterials: catalyst support, reaction temperature and product application

Conversion of Waste Plastic Packings to Carbon Nanomaterials: Investigation into Catalyst Material, Waste Type, and Product Applications

Catalytic upcycling of waste polypropylene for gram-scale production of FeCo@N-doped carbon nanotubes toward efficient oxygen reduction electrocatalysis

Valorizing disposable face masks into non-condensable hydrocarbon gases via optimal reactor configurations in thermal pyrolysis

Coking-resistant NiO@CeO 2 catalysts derived from Ce-MOF for enhanced hydrogen production from plastics

Catalytic Synthesis of Carbon Nanotubes and Hydrogen Gas from Waste Plastics Using LaNiO 3 Perovskite Catalyst

Co-production of Hydrogen and Carbon Nanotubes Via Catalytic Pyrolysis of Polyethylene over Fe/ZSM-5 Catalysts: Effect of Fe Loading on the Catalytic Activity

Upcycling of hazardous plastic waste by CO 2 transformation-enhanced steam reforming over MgO-promoted Ni/C bifunctional catalyst

Catalytic pyrolysis of plastic waste using metal-incorporated activated carbons for monomer recovery and carbon nanotube synthesis

Self-assembly kieselguhr-based ZSM-5 for catalytic pyrolysis of mask waste to produce high value-added aromatics

Preparation of aromatic hydrocarbons from fast pyrolysis of waste medical mask catalyzed by modified HZSM-5

Pyrolysis-catalysis of different waste plastics over Fe/Al2O3 catalyst: High-value hydrogen, liquid fuels, carbon nanotubes and possible reaction mechanisms

Fabrication of Fe-Zr, Co-Zr, and Ni-Zr Catalysts to Boost CNTs Synthesis from Plastic Wastes and the Electrocatalytic Oxygen Evolution Reaction

Porous carbon tubes from recycling waste COVID-19 masks for optimization of 8 mol% Y2O3-doped tetragonal zirconia polycrystalline nanopowder

Pyrolysis–catalysis upcycling of waste plastic using a multilayer stainless-steel catalyst toward a circular economy

Plasma‐Enabled Process with Single‐Atom Catalysts for Sustainable Plastic Waste Transformation