Abstract:In the present work, a green high-yielding method for the preparation of graphene is introduced via ultrasonic-assisted liquid phase exfoliation (LPE) of graphite in a green solvent medium, since the common preparation method of graphene via graphite oxide is hazardous. A high concentration of 3.2 mg/ml graphene is achieved here in a comparatively short duration of 3 h ultrasonication. By using a mixed solvents strategy (acetophenone and isopropyl alcohol, 1:19 V/V), surface energy requirements needed for the exfoliation of graphite are satisfied here with acetophenone, where isopropyl alcohol further facilitated the exfoliation via non-conventional CH-π and OH-π interactions. Turbostratic graphene in high-yield (16 %) in a simple means of ultrasonic assisted LPE is the added attraction of the present procedure. The less-defective structure of graphene, its few-layered turbostratic nature, and edge functionalization of the sheets are evident from the material characterization via Raman spectroscopy, XRD, TEM-SAED, and XPS analyses. Here, we report a combination of the attractive conducting polymer polyaniline (PANI) with the as-prepared graphene for supercapacitor applications, where the PANI/graphene nanocomposites with different aniline concentrations (PANI1.125/G, PANI4.5/G, and PANI9/G) have been prepared via in-situ polymerization of aniline in the graphene dispersion. The structure and morphology of the nanocomposites are investigated using different characterization techniques which revealed that the molecular structure of the PANI is retained in the nanocomposites even with a strong interaction with graphene. FESEM and TEM images revealed the good coverage of graphene sheets with PANI that limit the volume change of PANI during the repeated charge-discharge processes. Electrochemical studies showed that PANI4.5/G has the highest specific capacitance of 126.16 mF/cm2 at a current density of 1 mA/cm2, resulting from the perfect combination of the pseudocapacitance behavior of the PANI along with the electrical double layer capacitance of graphene. A symmetric supercapacitor device is also fabricated with PANI4.5/G, which showed the highest areal capacitance of 116.38 mF/cm2 similar to that with three-electrode studies and also good cycling stability with 87 % capacitance retention in the specific capacitance after 6000 cycles. It also exhibited an energy density of 16 µWh/cm2 (0.29 Wh/kg) and a power density of 3.99 mW/cm2 (72.72 W/kg).

Unveiling the high capacitive potential of electrochemically exfoliated superior-quality bilayer graphene

Graphene Aerogel Derived by Purification-Free Graphite Oxide for High Performance Supercapacitor Electrodes

Synthesis of high-quality graphene by electrochemical anodic and cathodic co-exfoliation method

One-step fabrication and capacitive behavior of electrochemical double layer capacitor electrodes using vertically-oriented graphene directly grown on metal

Highly Redox-active Oligomers between Graphene Sheets as Ultrahigh Capacitance/Rate and Stable Electrodes for Supercapacitors

Potassium citrate mediated self-restacking of graphene oxide to highly-microporous carbon nanosheets for high-performances supercapacitor

Optimized time dependent exfoliation of graphite for fabrication of Graphene/GO/GrO nanocomposite based pseudo-supercapacitor

Producing Bilayer Graphene Oxide via Wedge Ion-Assisted Anodic Exfoliation: Implications for Energy and Electronics

A High-Performance, Low Defected, and Binder-Free Graphene-Based Supercapacitor Obtained via Synergistic Electrochemical Exfoliation and Electrophoretic Deposition Process

Ultrafast Alternating-Current Exfoliation Toward Large-Scale Synthesis of Graphene and Its Application for Flexible Supercapacitors.

Graphene: Simultaneous Electrochemical Dual‐Electrode Exfoliation of Graphite Toward Scalable Production of High‐Quality Graphene (adv. Funct. Mater. 37/2019)

Highly efficient dual-electrode exfoliation of graphite into high-quality graphene via square-wave alternating currents

Electrochemically Cathodic Exfoliation of Graphene Sheets in Room Temperature Ionic Liquids N-butyl, Methylpyrrolidinium Bis(trifluoromethylsulfonyl)imide and Their Electrochemical Properties

Insights into the Conductive Network of Electrochemical Exfoliation with Graphite Powder as Starting Raw Material for Graphene Production

Simultaneous Electrochemical Exfoliation and Chemical Functionalization of Graphene for Supercapacitor Electrodes

Powder, paper and foam of few-layer graphene prepared in high yield by electrochemical intercalation exfoliation of expanded graphite.

Synthesis of the Water-Processable All-Carbon Composites of Pristine Graphene and Graphene Oxide Through a Simple One-Step Co-Exfoliation Method and Application to Supercapacitor

An environmentally sustainable ultrasonic-assisted exfoliation approach to graphene and its nanocompositing with polyaniline for supercapacitor applications

Dense yet highly ion permeable graphene electrodes obtained by capillary-drying of a holey graphene oxide assembly

Bilayer-favored Intercalation Induced Low-Voltage Electrochemical Production of Nano-Graphene Oxide in Neutral Phosphate

Tuning the structure of in-situ synthesized few layer graphene/carbon composites into nanoporous vertically aligned graphene electrodes with high volumetric capacitance