Abstract:Electrochemical exfoliation starting with graphite powder as the raw material for graphene production shows superiority in cost effectiveness over the popular bulk graphite. However, the crucial conductive network inside the graphite powder electrode along with its formation and influence mechanisms remains blank. Here, an adjustable-pressure graphite powder electrode with a sandwich structure was designed for this. Appropriate encapsulation pressure is necessary and conducive to constructing a continuous and stable conductive network, but overloaded encapsulation pressure is detrimental to the exfoliation and graphene quality. With an initial encapsulation pressure (IEP) of 4 kPa, the graphite powders expand rapidly to a final stable expansion pressure of 49 kPa with a final graphene yield of 46.3%, where 84% of the graphene sheets are less than 4 layers with ID/IG values between 0.22 and 1.24. Increasing the IEP to 52 kPa, the expansion pressure increases to 73 kPa, but the graphene yield decreases to 39.3% with a worse graphene quality including higher layers and ID/IG values of 1.68-2.13. In addition, small-size graphite powders are not suitable for the electrochemical exfoliation. With the particle size decreasing from 50 to 325 mesh, the graphene yield decreases almost linearly from 46.3% to 5.5%. Conductive network and electrolyte migration synergize and constrain each other, codetermining the electrochemical exfoliation. Within an encapsulated structure, the electrochemical exfoliation of the graphite powder electrode proceeds from the outside to the inside. The insights revealed here will provide direction for further development of electrochemical exfoliation of graphite powder to produce graphene.

Electrochemically Cathodic Exfoliation of Graphene Sheets in Room Temperature Ionic Liquids N-butyl, Methylpyrrolidinium Bis(trifluoromethylsulfonyl)imide and Their Electrochemical Properties

Few-layered graphene from cathodic exfoliation in binary solvents and application as a protective layer for lithium metal anodes

Electrochemically Triggered Graphene Sheets Through Cathodic Exfoliation for Lithium Ion Batteries Anodes

Regulating cations and solvents of the electrolyte for ultra-efficient electrochemical production of high-quality graphene

Effect of Static Pressure on Ultrasonic Liquid Phase Exfoliation of Few-Layer Graphene

Novel Cyclic Ultrasound-Assisted Liquid Phase Exfoliation of Graphene in Deionized Water: A Parameter Study

Low-temperature Exfoliation of Multilayer-Graphene Material from FeCl3 and CH3NO2 Co-Intercalated Graphite Compound.

Environmentally Friendly Approaches Toward the Production of Processable Graphene by Exfoliation of Graphite Using Ionic Liquid

Liquid-Phase Exfoliation Of Layered Biochars Into Multifunctional Heteroatom (Fe, N, S) Co-Doped Graphene-Like Carbon Nanosheets

Thermal Exfoliation of Layered Metal–Organic Frameworks into Ultrahydrophilic Graphene Stacks and Their Applications in Li–S Batteries

Electrolyte engineering for the mass exfoliation of graphene oxide across wide oxidation degrees

Unveiling the high capacitive potential of electrochemically exfoliated superior-quality bilayer graphene

Enhanced Exfoliation Efficiency of Graphite into Few-Layer Graphene Via Reduction of Graphite Edge

Ionic Liquid-Assisted Exfoliation Of Graphite Oxide For Simultaneous Reduction And Functionalization To Graphenes With Improved Properties

Single stage electrochemical exfoliation method for the production of few-layer graphene via intercalation of tetraalkylammonium cations

Mechanically Assisted Exfoliation and Functionalization of Thermally Converted Graphene Sheets

Scalable Clean Exfoliation of High‐Quality Few‐Layer Black Phosphorus for a Flexible Lithium Ion Battery

Insights into the Conductive Network of Electrochemical Exfoliation with Graphite Powder as Starting Raw Material for Graphene Production

Producing Bilayer Graphene Oxide via Wedge Ion-Assisted Anodic Exfoliation: Implications for Energy and Electronics

Electrochemical Exfoliation of Graphene-Like Two-Dimensional Nanomaterials

High surface area micro-mesoporous graphene for electrochemical applications