Abstract:Biomass is one of the promising alternative materials to solve the energy and environmental crisis. Fast pyrolysis is one of the most economical and commercially realizable technologies to convert biomass to useable fuels and chemicals. To improve the liquid products, co-pyrolysis with polypropylene (PP) over a mesoporous catalyst MCM-41 was studied in this paper. Thermogravimetry Fourier transform infrared spectroscopy (TG-FTIR) and pyrolysis gas chromatography mass spectrometry (Py-GC MS) were used as the main analysis methods to study the mass loss and detailed products of the co-pyrolysis. The mass loss, main functional groups, and identified products of pyrolysis of cellulose, PP, and their mixture were analyzed and discussed. All of the TG, FTIR, and Py-GC MS data show that there is no significant synergism between cellulose and PP when simply mixing them, although the C/H-eff of the mixture increases from 0 to 1.3. However, the addition of MCM-41 bring significant synergism. The TG and differential thermogravimetry (DTG) data show that the co-pyrolysis with MCM-41 shifts the decomposition of PP to a lower temperature, which provides more overlap between cellulose and PP in the range of 300-400 degrees C. According to the FTIR spectra, CO, CO2, and carbonyl are also produced in the peak for pyrolysis of PP for the mixture together with MCM-41, which indicates the intermolecular synergetic reaction. Furthermore, the results from Py-GC MS show that olefins (43.9%), oxygenated compounds (24.8%, mainly alcohols), and aromatics (17.8%) are the main products of co-pyrolysis of cellulose and PP in the presence of MCM-41, while oxygenated compounds (82.2%, mainly saccharides), olefins (4.7%), and aromatics (1.1%) will be the main products without the catalyst. Olefins and alcohols are Much more than the calculated value, which is the main result of synergism. Alcohols are mainly produced from the radical from the cracking of PP combined with the hydroxyl radical produced from decomposition of cellulose. Olefins are produced from the interaction reaction (carbenium ion reaction and beta-scission) between the primary products of cellulose and the hydrocarbon pool reaction of primary products of cellulose and PP. The results of this study enhance the understanding of co-pyrolysis of cellulose and PP in the presence of MCM-41 and provide the possible pathway of modifying the special pyrolysis products in catalytic pyrolysis of biomass with polymers.

Enhancing ketones and syngas production by CO2-assisted catalytic pyrolysis of cellulose with the Ce–Co–Na ternary catalyst

An Approach for Upgrading Behavior and Bio-Oil Production Using CO2-assisted Cellulose Pyrolysis in Cobalt-Based Ce/Fe/Mg Composite Catalyst

Catalytic Fast Pyrolysis of Cellulose in a Microreactor System Using Hierarchical Zsm-5 Zeolites Treated with Various Alkalis

Dehydrative Decarbonylation of Fatty Acids into Long-Chain Olefins over CoNx/NC Catalysts

Study on the Pyrolysis of Cellulose for Bio-Oil with Mesoporous Molecular Sieve Catalysts.

[Influence of ZSM-5(38)/Al-MCM-41 Composite Molecular Sieve Catalysts on Pyrolysis of Cellulose].

Efficient production of furans by CO 2 -assisted pyrolysis of cellulose with carbon-supported Ni/Co catalysts

Ketones Production by Catalytic Pyrolysis of Cellulose Using Iron-Modified Ni-Co Composite Catalyst: Products Distribution, Behaviour and Bio-oil Characteristics

CO Rich Syngas Production from Catalytic CO2 Gasification-Reforming of Biomass Components on Ni/CeO2

Synergistic benefits for hydrogen production through CO2-cofeeding catalytic pyrolysis of cellulosic biomass waste

Increased high selectivity light aromatics and furans production by co-feeding methanol to catalytic pyrolysis of cellulose with Lanthanum-Cerium bimetallic modified MCM-41 catalysts

Synergy of metallic Co and oxygen vacancy sites in Co/Ce-MOF catalysts for efficiently promoting lignin derived phenols and macromolecular lignin hydrodeoxygenation

Co@CoO:An Efficient Catalyst for the Depolymerization and Upgrading of Lignocellulose to Alkylcyclohexanols with Cellulose Intact

Improving the Conversion of Biomass in Catalytic Pyrolysis via Intensification of Biomass—Catalyst Contact by Co-Pressing

Increased aromatics production by co-feeding waste oil sludge to the catalytic pyrolysis of cellulose

Catalytic pyrolysis of rice husk to co-produce hydrogen-rich syngas, phenol-rich bio-oil and nanostructured porous carbon

Improving catalytic production of aromatic hydrocarbons with a mesoporous ZSM-5 modified with nanocellulose as a green template

Catalytic fast co-pyrolysis of Douglas Fir and low-density polyethylene with nanocellulose-derived carbon catalyst for enhancing selectivity of hydrogen in syngas and mono-aromatic hydrocarbon in bio-oil products

Catalytic co-pyrolysis of seaweeds and cellulose using mixed ZSM-5 and MCM-41 for enhanced crude bio-oil production

Catalytic conversion of cellulose over mesoporous Y zeolite

Synergetic Effect of Co-pyrolysis of Cellulose and Polypropylene over an All-Silica Mesoporous Catalyst MCM-41 Using Thermogravimetry–Fourier Transform Infrared Spectroscopy and Pyrolysis–Gas Chromatography–Mass Spectrometry