Abstract:To enhance the quality of raw bio-oil derived from the pyrolysis of biomass, hydrogen-rich reactants such as waste plastics, cooking oils, and soap stock are frequently incorporated into the fast catalytic co-pyrolysis (co-CFP) of biomass. Nevertheless, widespread uses of acids, bases, and zeolite catalysts must address concerns such as easy to coke, regeneration challenges, and environmental impacts. In this study, one green carbon catalyst is derived from nanocellulose (NCCC) and then firstly applied to co-pyrolyze the Douglas Fir (DF), a typical lumber species in North America, together with low-density polyethylene (LDPE), a commonly used plastic. The use of NCCC during feedstock co-pyrolysis boosted the formation of aromatics, particularly the mono-aromatic hydrocarbons (MAHs) in bio-oil and H 2 -rich gaseous products, with a selectivity of H 2 to 65 vol.%, nearly double the selectivity without catalysts. Even after five consecutive applications, the NCCC still displays good catalytic effectiveness in the co-pyrolysis: its selectivity for H 2 in gaseous products (48 area%) after five-time usage is virtually equal to that without catalysts (46 area%). Moreover, the mechanism of the NCCC application was investigated by applying the NCCC in a co-pyrolysis of LDPE and DF, along with their individual pyrolysis at temperatures ranging from 450 to 800 °C. This research investigated the potential catalytic impacts of NCCC in co-CFP process, aiming to provide an affordable, eco-friendly heterogeneous catalyst to replace existing acid/base catalysts in the conversion of biomass.

Efficient production of furans by CO 2 -assisted pyrolysis of cellulose with carbon-supported Ni/Co catalysts

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Construction of N, O Co-Doped Carbon Anchored with Co Nanoparticles As Efficient Catalyst for Furfural Hydrodeoxygenation in Ethanol

In-situ and Ex-situ Catalytic Pyrolysis of Cellulose to Produce Furans Over Red Mud-supported Transition Metal Catalysts

Catalytic fast co-pyrolysis of Douglas Fir and low-density polyethylene with nanocellulose-derived carbon catalyst for enhancing selectivity of hydrogen in syngas and mono-aromatic hydrocarbon in bio-oil products

Catalytic pyrolysis of cellulose over solid acidic catalysts: an environment-friendly method for furan production

Enhancing ketones and syngas production by CO2-assisted catalytic pyrolysis of cellulose with the Ce–Co–Na ternary catalyst

Ketones Production by Catalytic Pyrolysis of Cellulose Using Iron-Modified Ni-Co Composite Catalyst: Products Distribution, Behaviour and Bio-oil Characteristics

Enhanced Selectivity in the Production of Furans/Olefins through Ex-situ Catalytic Pyrolysis over Metal-Modified TS-1

Catalytic Pyrolysis of Cellulose with Sulfated Metal Oxides: A Promising Method for Obtaining High Yield of Light Furan Compounds

[Influence of ZSM-5(38)/Al-MCM-41 Composite Molecular Sieve Catalysts on Pyrolysis of Cellulose].

In-depth Study of Synergism Between Torrefaction and Catalyst for Balanced Production of Bio-Oil from Rice Husk Pyrolysis Based on Hydrocarbons Production, Energy Yield and Deoxygenation Degree

Production of hydrocarbon-rich bio-oil from catalytic pyrolysis of waste cooking oil over nickel monoxide loaded corn cob-derived activated carbon

High production of furfural by flash pyrolysis of C6 sugars and lignocellulose by Pd-PdO/ZnSO4 catalyst

Effective oxidative esterification of 5–hydroxymethylfurfural over a N-doped biomass-based carbon supported cobalt catalyst

Catalytic pyrolysis of fatty acids and oils into liquid biofuels and chemicals over supported Ni catalysts on biomass-derived carbon

Increased aromatics production by co-feeding waste oil sludge to the catalytic pyrolysis of cellulose

Catalytic Fast Pyrolysis of Biomass to Produce Furfural Using Heterogeneous Catalysts

Catalytic Pyrolysis Vapor Upgrading of Corncob into Furans over Pyrolysis-Comprehensive Two-Dimensional Gas Chromatography/Mass Spectrometry: Significance of Catalyst and Temperature

Improving the Aromatic Production in Catalytic Fast Pyrolysis of Cellulose by Co-Feeding Low-Density Polyethylene

Efficient ex-situ catalytic upgrading of biomass pyrolysis vapors to produce methylfurans and phenol over bio-based activated carbon