Abstract:This thesis explores the thermal and mechanical phenomena occurring during the Cold Metal Transfer (CMT) additive manufacturing process of TC4 titanium alloy. The investigation delves into the effects of layer-by-layer deposition on the thermal cycles, stress distribution, and microstructural evolution of the additive manufactured specimens. Key findings include the identification of thermal accumulation with increasing deposition layers, leading to a decrease in cooling rates and a slight increase in the peak molten pool temperatures. The temperature profiles on the substrate exhibit cyclic patterns of peaks and troughs, which become smoother and exhibit less variance between maximum and minimum temperatures as deposition progresses. Stress analysis reveals that equivalent stress within the deposited layers decreases with the number of layers. This is attributed to the thermal stress accumulation and stress cycles induced by multiple thermal cycles, which initially increase the equivalent stress. However, a reduction in cooling rates over time and the effects of remelting facilitate the release of interlayer stress, resulting in minimal residual stress within the cooled specimens. Microstructurally, the TC4 titanium alloy specimens are characterized by the presence of primary β phase spanning across multiple deposition layers, growing in the direction of additive manufacturing. The accumulated heat input from increased layering enhances the growth of the primary β phase.The specimens' microstructure features a basketweave pattern comprised of α' martensite, α, and β phases, with α' martensite directly transformed from the primary β phase. Repeated heating cycles foster diverse pathways for the secondary α phase's formation, leading to more pronounced, directionally parallel α phases and extensive basketweave structures within the specimen layers. Higher temperature gradients at specimen edges encourage the formation of needle-like α' martensite. This thesis contributes to the understanding of the thermal behavior, stress dynamics, and microstructural characteristics in TC4 titanium alloy during CMT additive manufacturing, highlighting the interplay between process parameters, thermal management, and material response.

High-throughput microstructure characterization of titanium alloy by a multi-dimensional information strategy

High-speed nanoindentation mapping of a near-alpha titanium alloy made by additive manufacturing

Multiscale Mixed Modality Microstructure Assessment for Titanium (M4AT) Data Set

Recent progress in the simulation of microstructure evolution in titanium alloys

Recent Electron Microscopy Results on Micro- and Nanostructured Ni-Ti-(X) Shape Memory Alloys

Three-dimensional microstructure reconstruction for two-phase materials from three orthogonal surface maps

Three-dimensional particle size, shape, and internal porosity characterization: Application to five similar titanium alloy (Ti–6Al–4V) powders and comparison to two-dimensional measurements

Microdeformation and strengthening mechanism of 3D printed TC4/TC11 gradient titanium alloy subjected to tensile loading

Numerical Simulation-Based Study on the Microstructure of TC4 Titanium Alloy in CMT Additive Manufacturing

Identification of hardening and fracture behaviors of titanium alloy by a hybrid digital image correlation and finite element method

Unsupervised machine learning and cepstral analysis with 4D-STEM for characterizing complex microstructures of metallic alloys

An Improved High-Throughput Data Processing Based on Combinatorial Materials Chip Approach for Rapid Construction of Fe-Cr-Ni Composition-Phase Map

Using transmission Kikuchi diffraction to characterise α variants in an α + β titanium alloy

Microstructure and Mechanical Properties of TC4 Titanium Alloy by Electron Beam Freeform Fabrication

Influence of Heat Treatment on Microstructure and Mechanical Properties of TC4 Titanium Alloy

In Situ Characterization Techniques Based on Synchrotron Radiation and Neutrons Applied for the Development of an Engineering Intermetallic Titanium Aluminide Alloy

Data-driven mapping-relationship mining between hardness and mechanical properties of dual-phase titanium alloys via random forest and statistical analysis

Microstructure tailoring and impact toughness of a newly developed high strength Ti-5Al-3Mo-3V-2Cr-2Zr-1Nb-1Fe alloy

Fabrication of Highly Heterogeneous Precipitate Microstructure in an Α/β Titanium Alloy

Mechanism investigation on high-performance Cu-Cr-Ti alloy via integrated computational materials engineering

Overview of Surface Modification Techniques for Titanium Alloys in Modern Material Science: A Comprehensive Analysis