Abstract:Finite element modeling for designing and optimizing lightweight titanium aerospace components requires advanced simulation tools with adequate material modeling. In this sense, a hybrid strategy is proposed in this work to identify the parameters of the Johnson–Cook plasticity and damage laws using a combined direct-inverse method. A direct calibration method for plasticity law is applied based on the literature-reported data of strain-stress curves from experimental tensile tests at different temperatures and strain rates. The triaxiliaty-dependent fracture parameters of the Johnson–Cook damage law at reference conditions of strain rate and temperature (d1, d2, and d3) are calibrated with the direct method based on new data of experimental evolution of computed average fracture strain with the average stress triaxiality. The validation is performed with numerical results from an accurate micromechanics-based Ti64 model. The inverse calibration method is used to determine the strain rate and temperature-dependent damage parameters (d4 and d5) through large strain simulations of uniaxial tensile tests. The numerical results, including average strain and necking profile at fracture, are then utilized to calculate stress triaxiality by the Bridgman criterion for adjusting parameters d4 and d5. The calibrated model yields a 2.1% error for plasticity and 3.4% for fracture predictions. The experimental and simulated load-bearing capacity using the micromechanics damage model differed by only 1%. This demonstrates that the SC11–TNT model of Ti64 is reliable for identifying the Johnson–Cook damage law through the accurate use of inverse methods. The hybrid calibration strategy demonstrates the potential capability of the identified Johnson–Cook model to accurately predict the design load-carrying capacity of Ti64 aerospace components under different deformation rates and temperatures while accounting for material damage effects.

Identification of hardening and fracture behaviors of titanium alloy by a hybrid digital image correlation and finite element method

Research on parameter identification of fracture model for titanium alloy under wide stress triaxiality based on machine learning

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Detecting the Deformation Behavior of Bimodal Ti-6Al-4V Using a Digital Image Correlation Technique

A Combined Experimental and Numerical Calibration Approach for Modeling the Performance of Aerospace-Grade Titanium Alloy Products

Microscopic Strain Localization of Ti-6Al-4V Alloy Under Uniaxial Tensile Loading

Inverse Identification Method for Determining Stress–strain Curves of Sheet Metals at High Temperatures

Combined crystal plasticity simulations and experiments for parameter identification: application to near-β titanium alloy

Investigation on the thermal deformation mechanisms and constitutive model of Ti-55511 titanium alloy

Interaction Between Local Plastic Strain and Multi-Scale Fatigue Crack Propagation Behavior in Titanium Alloy TC4

In-situ investigation on tensile deformation and fracture behaviors of inhomogeneous microstructure during laser repair of Ti-6Al-4 V titanium alloy

Microdeformation and strengthening mechanism of 3D printed TC4/TC11 gradient titanium alloy subjected to tensile loading

In-situ investigation on the anisotropic behavior of the additively manufactured dual-phase Ti-6Al-4V alloy

Artificial neural network enhanced plasticity modelling and ductile fracture characterization of grade-1 commercial pure titanium

Molecular Dynamics Modeling the Nano-Identation of Titanium

Unified thermomechanical model of Ti-6Al-4V titanium alloy considering microstructure evolution and damage fracture under different stress state

Hot Deformation and Constitutive Modeling of TC21 Titanium Alloy

Prediction of ductile cracking in the titanium alloy forging process

Fracture Behaviors of Commercially Pure Titanium under Biaxial Tension: Experiment and Modeling

A hybrid finite-element and cellular-automaton framework for modeling 3D microstructure of Ti–6Al–4V alloy during solid–solid phase transformation in additive manufacturing