Method of inclined hole axis adjustment based on geometric optimization and minimum zone theory

He Zhang,Shixiong Yan,Li Wang,Chenghui Sun,Jiwen Cui

DOI: https://doi.org/10.1088/1361-6501/ad330a

IF: 2.398

2024-03-13

Measurement Science and Technology

Abstract:The machining accuracy of the axis position and spatial angle of the array microholes with high aspect ratio on the components of high-end equipment manufacturing industry will directly affect the performance of the whole machine. A method of tilt hole axis adjustment is proposed in this paper. It utilizes geometric optimization and minimum zone theory to measure the position and spatial angle of the hole axis. This addresses the slight angle error that occurs after correcting the inclined hole axis using visual techniques. Based on the minimum zone criterion of cylindricity error, the evaluation model is re-established through inner and outer loop and spatial projection, which includes roundness evaluation of the projection curve by improved particle swarm optimization algorithm and elliptic fitting by geometric parameter method, so as to obtain the optimal solution of the axis vector and spatial angle. According to the above theory, the experimental comparison shows that the precision of the method proposed is better than that of the least square method and the traditional particle swarm optimization algorithm based on the minimum zone criterion. The research results indicate that the precision of tilt angle is better than 0.03°, simultaneously the rotation angle is better than 0.1° in the range of 1°. This experiment verifies the effectiveness and accuracy of the proposed method.

engineering, multidisciplinary,instruments & instrumentation