Abstract:M50 bearing steel designed for aerospace applications exhibits unique microstructural alterations at the subsurface during rolling contact fatigue (RCF). In this work, three types of microstructural alterations, light etching region (LER), white etching band (WEB) and white etching area (WEA) are systematically studied. A hardness profile at the subsurface is obtained by microindentation with material softening being detected. It is found that the material softening is associated with the formation of WEBs. The microstructural nature of the three types of microstructural alterations is revealed by detailed characterisation using focused ion beam milling and transmission electron microscopy. It is found that LERs, WEBs and WEAs are a manifestation of the decay of the parent martensite and all consist of dislocation cells or fine grains, indicative of plastic deformation. Through subsurface stress field analysis, LER, WEBs and WEAs are found to be caused by different stress components. The similarities and differences of the microstructural alterations in M50 and in widely studied 100Cr6 are discussed where the stability of carbides is believed to play a key role. The difference in material response in the microstructural alterations in M50 is further analysed and modelled based on Kocks and Mecking theory, with different types of activated dislocation slip systems found to be the root cause for such difference. Based on the material response analysis for WEBs, a material softening model for M50 during RCF is established by considering residual plastic strain accumulation, yielding prediction results in agreement with experimental measurement.

Relating rolling contact fatigue (RCF) life to the microstructure evolution in aerospace grade bearing steels: A comparison of Cronidur-30 with AISI 440C

Microstructural-based analysis of the unexpected differences in rolling contact fatigue behavior between SAE52100 and SAE4320

Influence of Residual Stress and Temperature on the Cyclic Hardening Response of M50 High-Strength Bearing Steel Subjected to Rolling Contact Fatigue

Further Investigations and Parametric Analysis of Microstructural Alterations under Rolling Contact Fatigue

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Rolling Contact Fatigue Performances Of Carburized And High-C Nanostructured Bainitic Steels

Carburization Induced Extra-Long Rolling Contact Fatigue Life of High Carbon Bearing Steel

High-silicon spring steel transformation to carbide-free bainitic (CFB) steel: a mechanical and tribological approach under rolling/sliding conditions

Microstructural evolution and performance change of a carburized nanostructured bainitic bearing steel during rolling contact fatigue process

Influence of original microstructure on rolling contact fatigue property of D2 wheel steel

Effects of carburizing and nitriding sequential treatment on rolling contact fatigue of M50NiL bearing steel

Finite Element Analysis Simulation of the Effect of Induction Hardening on Rolling Contact Fatigue

Rolling Contact Fatigue Wear Behavior of Carbide-free Bainitic Steel

The Effect of Cold Ring Rolling on the Heat Treatment Microstructure and Wear Resistance of GCr15 Bearing Steel

Cyclic Softening Properties of 30cr2mov Steel at Elevated Temperatures

The origin of microstructural alterations in M50 bearing steel undergoing rolling contact fatigue

The effect of retained austenite on rolling/sliding contact fatigue of high carbon steel

Rolling Contact Fatigue Property of Low-Temperature Bainite in Surface Layer of A Low Carbon Steel

Surface integrity and rolling contact fatigue behavior of 18CrNiMo7-6 steel subjected to ultrasonic surface rolling process

Rolling Contact Fatigue Behaviors of 20CrNi2Mo Steel by a New Carbon and Nitrogen Composite Infiltration Process