Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. Carbon nanotube aluminum matrix (CNTs/AL) composites are ideal lightweight and high-strength materials due to their excellent properties. However, the research on CNTs/AL composites only stays in the simulation and preparation stages, and no grinding research has been carried out. Revealing the grinding mechanism of CNTs/AL composites has far-reaching significance for the development of high-end equipment industries such as aerospace. Taking CNTs/2009AL composites as the research object, a minimum quantity lubrication (MQL) flat grinding platform was built for comparing the surface quality and defects of dry grinding and MQL grinding. The experimental results show that grinding wheel velocity was the grinding parameter that had the greatest influence on surface roughness in dry grinding and MQL grinding. The subsurface defects of dry grinding mainly included microcracks, burrs, pits, coatings, cavities, etc., and the rebound phenomenon of agglomerated carbon nanotubes. The subsurface defects of MQL grinding were only burrs and pits. The surface coating phenomenon of dry grinding increased with the increase in grinding wheel velocity, and the surface quality was improved. MQL grinding could significantly reduce grinding heat, reduce friction, and make the machined surface smoother. In dry grinding and MQL grinding, the subsurface damage depth decreased obviously with the increase in grinding wheel velocity. When the grinding wheel velocity was 30 m/s, the minimum subsurface damage depth of dry grinding and MQL grinding was 40.091 and 26.906 μm, respectively. Mastering the grinding mechanism of grinding CNTs/AL composites and the influence of grinding parameters on surface quality provides a basis for the selection of parameters and methods in grinding in industry. MQL grinding of CNTs/AL composites reduces the formation of many surface defects and improves the surface quality of the workpiece. It is an efficient, clean, and environmentally friendly processing method.

Experimental investigation of cutting forces in dry grinding of Ti-6Al-4V alloy using CNT nano grinding tool

Surface Characteristics and Roughness Prediction of TC4 Titanium Alloy in High Speed Grinding

Study on the grinding surface quality of CNTs/2009AL composite material based on minimum quantity lubrication

Machining behavior using micro-grooved cutting tools filled with carbon nanotubes

Self-sharpening property of porous metal-bonded aggregated cBN wheels during the grinding of Ti–6Al–4V alloys

AFM Analysis on Surface Roughness of Single Crystal Silicon Machined with Carbon Nanotubes Reinforced Composite Micro Grinding Wheel

Grinding of Ti2AlNb intermetallics using silicon carbide and alumina abrasive wheels: Tool surface topology effect on grinding force and ground surface quality

Grindability of carbon fiber reinforced polymer using CNT biological lubricant

Process parameter optimization and surface integrity evolution in the high-speed grinding of TiAl intermetallics based on grey relational analysis method

Investigation on the effect of grinding wheel for grinding of AISI D3 tool steel under different conditions

Self-lubricating performance of a grinding wheel filled with CNTs@T304 nano-capsules

Effect of radial ultrasonic vibrations on wear properties of CBN grains in high-speed grinding of PTMCs

Mechanisms of abrasive wear in the grinding of titanium (TC4) and nickel (K417) alloys

On the tribology and grinding performance of graphene-modified porous composite-bonded CBN wheel

Parametric optimisation of milling process for the machining of carbon nanotubes-based hybrid aluminium composite

Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant

Fretting wear characteristics of Ti6Al4V/TiC nano composites using response surface method

CBN grain wear and its effects on material removal during grinding of FGH96 powder metallurgy superalloy

Micro-fracture behavior of a single-aggregated cBN grain and its relation to material removal in high-speed grinding of Ti–6Al–4V alloys

Multi-Constraint Optimization for Grinding Nickel-Based Alloys

Comparative analysis of the cutting performances of SiAlON ceramic, cubic boron nitride and carbide cutting tools for titanium machining