Abstract:The depletion of traditional energy sources, such as fossil fuels, has prompted the direct synthesis of materials with high-capacity performance for energy storage applications. Nitrogen-doped porous carbon (NPC) derived from Zeolite imidazole framework ZIF-8 stands out as a prime candidate for the development of electrochemical double-layer capacitors (EDLCs) due to their high stability and versatile morphology. In this study, the surface of NPC supported onto nickel foam (NF) was decorated with platinum nanoparticles (PtNPs) using an efficient and cost-effective electrodeposition method. The electrodeposition conditions were evaluated in the form of deposition potential and time. PtNPs-decorated NPC electrode deposited at −0.4 V for 120 s shows outstanding properties compared to other electrodes. The electrochemical properties of fabricated electrodes were assessed in 6 M KOH using cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS). The PtNPs-NPC at −0.4 V electrode demonstrated a remarkable characteristic specific capacitance (Cs) of 1700 ± 1.12 F g−1 at 0.2 A g−1. This electrode displayed high cyclic stability, with only a 2.0 % reduction in its capacitance retention over 5000 cycles. The Cs of PtNPs-NPC at −0.4 V smoothly declined in the first 1000 cycles from 1164.73 ± 1.02 to 1153.20 ± 1.16 F g−1, with a retention of 99.01 %. Even after 5000 cycles, it becomes 1142.25 ± 1.16 F g−1 with a retention of 98.07 %. PtNPs-decorated NPC at −0.4 V also showcased the highest energy density (E) and power density (P) of 80 ± 1.11 Wh kg−1, and 1038.42 ± 1.32 W kg−1, respectively. In contrast, the pristine NPC exhibited an E, and P of 25.0 ± 1.92 Wh kg−1, and 882.0 ± 1.52 W kg−1, respectively. Our strategy demonstrates a new strategy for decoration of NPC surface, opening up possibilities for further exploration of different NPs to engineer promising electrode materials for supercapacitor (SCs) applications.

Nitrogen-Doped Hierarchical Nanoporous Carbon Materials from Discarded Polyurethane Sponges via One-Step Double-Activation Method for Double-Layer Capacitors

Inlaying ZIF-derived Co3S4 Hollow Nanocages on Intertwined Polypyrrole Tubes Conductive Networks for High-Performance Supercapacitors

Nitrogen-functionalized Microporous Carbon Nanoparticles for High Performance Supercapacitor Electrode

Facile 3D Nitrogen‐Doped Hierarchical Porous Carbon for High‐Performance Supercapacitors

N, S Co-doped hierarchical porous carbon rods derived from protic salt: Facile synthesis for high energy density supercapacitors

Synthesis of Nitrogen-Doped Polymeric Resin-Derived Porous Carbon for High Performance Supercapacitors

Aminal/Schiff‐Base Polymer to Fabricate Nitrogen‐Doped Porous Carbon Nanospheres for High‐Performance Supercapacitors

High-yield and nitrogen self-doped hierarchical porous carbon from polyurethane foam for high-performance supercapacitors

N-doped layered porous carbon electrodes with high mass loadings for high-performance supercapacitors

Highly exposed active sites of MOFs-derived N-doped nanoporous carbon decorated with platinum for enhanced energy storage application

Biomass-derived nitrogen and sulfur co-doped sheet-like porous carbon for high-performance supercapacitors

Nitrogen-doped micro-nano carbon spheres with multi-scale pore structure obtained from interpenetrating polymer networks for electrochemical capacitors

Nitrogen-doped hierarchical porous carbon as an efficient electrode material for supercapacitors

Nitrogen-doped porous carbon nanofoams with enhanced electrochemical kinetics for superior sodium-ion capacitor

N-Doped Porous Carbons with High Surface Areas Prepared Through One-Step Chemical Activation and Their Application for Supercapacitors

Facile synthesis of crumpled nitrogen doped porous carbon nanosheets with ultrahigh surface area for high performance supercapacitors

Polymerization-Pyrolysis-Derived Hierarchical Nitrogen-Doped Porous Carbon for Energetic Capacitive Energy Storage

Nitrogen-doped hollow carbon nanoparticles with optimized multiscale nanostructures via dolomite-assisted chemical vapor deposition for high-performance potassium-ion capacitor

Nitrogen, Phosphorus Co-doped Carbon Obtained from Amino Acid Based Resin Xerogel as Efficient Electrode for Supercapacitor

Upcycling Waste Polyethylene Terephthalate to Produce Nitrogen-Doped Porous Carbon for Enhanced Capacitive Deionization

Nitrogen-doped porous carbon materials derived from ionic liquids as electrode for supercapacitor