Abstract:The TC4 titanium (Ti) alloy has been widely utilized in various industries such as aerospace and shipbuilding, owing to its numerous advantages. Its exceptional properties have made it a material of choice for applications requiring high performance and reliability. The total weld thickness was 140 mm, and microstructures and high‐cycle fatigue properties were investigated at three different layers within the 140‐mm section. Experimental results show that the overlap area at two weld roots has the highest microhardness and largest nonuniformity of the overall joints, so the area is found to have the poorest high‐cycle fatigue properties. The microstructures in every layer of the weld metal of the joints were analyzed to determine the causes of the poor fatigue properties in the overlapping area at the weld roots. Significant amounts of α′ acicular microstructure are present in the weld metal of joints, while the overlap area at weld roots contains more α′ acicular microstructure with a finer size. Compared with other layers, the weld metal and base metal in Layer 2 (overlap area) have the largest microhardness gradient, where the stress concentration is more serious in the fatigue experimental process. Heat dissipation conditions was a critical factor for the inhomogeneity of microstructure and mechanical properties along the thickness direction of 140‐mm double‐sided electron beam welding joint. Fatigue damage (micropore) is formed at β phases in priority, and fatigue cracks propagate via series connection of micropores, indicative of transgranular ductile cracks.

Very long life fatigue failure mechanism of electron beam welded joint for titanium alloy at elevated temperature

Microstructure and pore sensitivities in very high cycle fatigue behaviors of titanium alloy welded joints under stress ratios

Initiation and propagation mechanism of fatigue crack in ultra-thick titanium alloy vacuum electron beam welding joint

Failure and deformation behaviors of electron beam weldment of titanium alloy Ti-60 at elevated temperature

Nonuniformity of Fatigue Properties of Two‐Sided Electron Beam Welded Joint of Superthick Titanium Alloy

Microstructure based cracking behavior and life assessment of titanium alloy under very-high-cycle fatigue with elevated temperatures

Microstructure and mechanical properties of a new alloy Ti650 welded joint via electron beam welding

Zoning Study on the Fatigue Crack Propagation Behaviors of a Double-Sided Electron Beam Welded Joint of TC4 Titanium Alloy with the Thickness of 140 Mm

Effect of three-stage heat treatment on the composite waveform and variable amplitude fatigue properties of TC4 titanium alloy pulsed laser-arc hybrid welded joints

Fatigue inhomogeneity of 140 mm thick TC4 titanium alloy double-sided electron beam welded joints

Microstructure and Crack Sensitivity of Electron Beam Welded Titanium Aluminide Joints

Effects of post-weld heat treatment on elevated temperature performances of electron beam welds of a near-alpha titanium alloy

High Cycle Fatigue Life of Ti-6Al-4V Titanium Alloy Processed by Electron Beam Welding

High-temperature Fatigue Property of Ti46Al8Nb Alloy with the Fully Lamellar Microstructure

Microstructure and Mechanical Properties at Elevated Temperature of Laser-Welded Ti–22Al–25Nb Alloy Sheets

Fatigue cracking behavior and life assessment of TC11 titanium alloy in very high cycle regime at two working temperatures

Effect of Temperature on High‐cycle Fatigue and Very High Cycle Fatigue Behaviours of a Low‐strength Cr–Ni–Mo–V Steel Welded Joint

Microstructure Evolution and Its Effect on Mechanical Properties in an Electron Beam Welded Β-Solidified Tial Alloy

Defect-based fatigue crack nucleation and strength evaluation of additively manufactured TiC/Ti6Al4V titanium matrix composite at different temperatures

Very high cycle fatigue behavior of laser powder bed fusion additively manufactured Ti6Al4V alloy at elevated temperature

Fatigue Behavior of Titanium Alloy Ti-4Al-2V under High Cycle Loading at Elevated Temperature