Abstract:Optically transparent polyimide (PI) films with good atomic oxygen (AO) resistance have been paid extensive attention as thermal controls, optical substrates for solar cells or other components for low Earth orbit (LEO) space applications. However, for common PI films, it is usually quite difficult to achieve both high optical transparency and AO resistance and maintain the intrinsic thermal stability of the PI films at the same time. In the current work, we aimed to achieve the target by using the copolymerization methodology using the fluorinated dianhydride 9,9-bis(trifluoromethyl)xanthene-2,3,6,7-tetracarboxylic dianhydride (6FCDA), the fluorinated diamine 2,2-bis [4-(4-aminophenoxy)phenyl]hexafluoropropane (BDAF) and the polyhedral oligomeric silsesquioxane (POSS)-containing diamine N-[(heptaisobutyl-POSS)propyl]-3,5-diaminobenzamide (DABA-POSS) as the starting materials. The fluoro-containing monomers were used to endow the PI films with good optical and thermal properties, while the silicon-containing monomer was used to improve the AO resistance of the afforded PI films. Thus, the 6FCDA-based PI copolymers, including 6FCPI-1, 6FCPI-2 and 6FCPI-3, were prepared using a two-step chemical imidization procedure, respectively. For comparison, the analogous PIs, including 6FPI-1, 6FPI-2 and 6FPI-3, were correspondingly developed according to the same procedure except that 6FCDA was replaced by 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA). Two referenced PI homopolymers were prepared from BDAF and 6FDA (PI-ref1) and 6FCDA (PI-ref2), respectively. The experimental results indicated that a good balance among thermal stability, optical transparency, and AO resistance was achieved by the 6FCDA-PI films. For example, the 6FCDA-PI films exhibited good thermal stability with glass transition temperatures (Tg) up to 297.3 °C, good optical transparency with an optical transmittance at a wavelength of 450 nm (T450) higher than 62% and good AO resistance with the erosion yield (Ey) as low as 1.7 × 10−25 cm3/atom at an AO irradiation fluence of 5.0 × 1020 atoms/cm2. The developed 6FCDA-PI films might find various applications in aerospace as solar sails, thermal control blankets, optical components and other functional materials.

Synthesis and properties of colorless copolyimides derived from 4,4′-diaminodiphenyl ether-based diamines with different substituents

Synthesis of High-Performance Colorless Polyimides with Asymmetric Diamine: Application in Flexible Electronic Devices

Colorless Poly(amide-imide)s with Low Dielectric Constants and Enhanced Mechanical Properties through Tri-Armed Cross-Linkers

High comprehensive properties of colorless transparent polyimide films derived from fluorine-containing and ether-containing dianhydride

Ultralow Coefficient of Thermal Expansion and a High Colorless Transparent Polyimide Film Realized Through a Reinforced Hydrogen-Bond Network by In Situ Polymerization of Aromatic Polyamide in Colorless Polyimide

Synthesis and properties of novel colorless polyimide containing indene and amide groups

Monomer Dependence of Colorless and Transparent Polyimide Films: Thermomechanical Properties, Optical Transparency, and Solubility

Synthesis and properties of polyimides from a diamine containing side diphenylphosphine oxide and trifluoromethyl groups

Synthesis of colorless transparent poly(amide-imide) with high modulus and low thermal expansion coefficient and its performance study

Colorless Semi-Alicyclic Copolyimides with High Thermal Stability and Solubility

Synthesis and properties of novel colorless and thermostable polyimides containing cross‐linkable bulky tetrafluorostyrol pendant group and organosoluble triphenylmethane backbone structure

Short-Side-Chain Regulation of Colorless and Transparent Polyamide-Imides for Flexible Transparent Displays

Synthesis and Properties of Optically Transparent Fluoro-Containing Polyimide Films with Reduced Linear Coefficients of Thermal Expansion from Organo-Soluble Resins Derived from Aromatic Diamine with Benzanilide Units

Synthesis and Characterization of Organo-Soluble Polyimides Based on Polycondensation Chemistry of Fluorene-Containing Dianhydride and Amide-Bridged Diamines with Good Optical Transparency and Glass Transition Temperatures over 400 °C

Synthesis of a Novel Rigid Semi-Alicyclic Dianhydride and Its Copolymerized Transparent Polyimide Films' Properties

Synthesis and characterization of high T g and colorless polyamide-imide films derived from amide-containing diamines with different trifluoromethyl substitution

Synthesis of colorless polyimides derived from benzimidazole diamines with bis‐amide structures

Synthesis and comparative study of high Tg and colorless polyamide‐imides with different amide‐to‐imide ratio

Synthesis and characterization of amide-bridged colorless polyimide films with low CTE and high optical performance for flexible OLED displays

Synthesis of UV-resistant and colorless polyimide films for optoelectrical applications

Preparation and Characterization of Atomic Oxygen-Resistant, Optically Transparent and Dimensionally Stable Copolyimide Films from Fluorinated Monomers and POSS-Substituted Diamine