Abstract:The intrinsic porosity in the periodic structures of metal–organic frameworks (MOFs) endows them with a great potential for membrane separation. However, facile fabrication of crystalline MOF membranes has been challenging and limited to few materials for economic and environmental considerations. Herein, a continuous Zr‐MOF thin film with a thickness of ≈180 nm has been fabricated via in situ recrystallization of MOF nanoparticles on the porous support under formic acid vapor. Owing to the inherent microporosity and the well‐established hydrophilicity during membrane fabrication, the MOF thin films exhibit excellent pervaporation performance with separation factors of 2630, 501 and fluxes of 1.45, 1.41 kg m−2 h−1) for n‐butanol dehydration and methanol/methyl tert‐butyl ether (MeOH/MTBE) separation, respectively. The structural stability of the film has been further confirmed by its steady performance in the 10‐day pervaporation test. This in situ recrystallization method induced by a trace amount of acid vapor with no extra ingredients opens a new avenue for the facile membrane fabrication of various MOF materials to feasibly realize their versatile potential as membrane materials. Inspired by modulated synthesis of metal–organic frameworks (MOF) involving acidic modulators, facile and green fabrication of continuous Zr‐MOF films is achieved via in situ recrystallization of MOF nanoparticles confined on the porous support induced by trace acid vapor without extra ingredients. Owing to the inherent microporosity and the well‐established hydrophilicity, the MOF thin films exhibit excellent pervaporation performance.

Preparation of Free-Standing Defect-Free ZIF-8/PVA Membranes via Confined Reaction at the Quasi-Interface

Fabrication Of Metal-Organic Framework/Polymer Composites Via A One-Pot Solvent Crystal Template Strategy

Zeolite Imidazolate Framework Membranes on Polymeric Substrates Modified with Poly(vinyl Alcohol) and Alginate Composite Hydrogels.

Self-assembly of defect-free polymer-based zeolite imidazolate framework composite membranes with metal-phenolic networks for high efficient H<sub>2</sub>/CH<sub>4</sub> separation

Metal-organic Composite Membrane with Sub-2 Nm Pores Fabricated Via Interfacial Coordination

Polymer-supported ultra-thin ZIF-67 membrane through in situ interface self-repair

Fabrication of ZIF-8 Membranes on Dual-Layer ZnO-PES/PES Organic Hollow Fibers by In-Situ Crystallization

Non‐selective Defect Minimization towards Highly Efficient Metal‐Organic Framework Membranes for Gas Separation

Hierarchical and defect-free metal-organic framework membranes deep-rooted within flexible nanofiber substrate

Non-activation ZnO array as a buffering layer to fabricate strongly adhesive metal-organic framework/PVDF hollow fiber membranes.

Metal based gels as versatile precursors to synthesize stiff and integrated MOF/polymer composite membranes

Confined‐Coordination Induced Intergrowth of Metal‐Organic Framework into Precise Molecular Sieving Membranes

Preparation and gas separation performance of seeding-free aqueous synthesis ZIF-8 membrane by homologous-like ligands method

Metal-Organic Framework/Pvdf Composite Membranes with High H-2 Permselectivity Synthesized by Ammoniation

Stiff Metal–organic Framework–polyacrylonitrile Hollow Fiber Composite Membranes with High Gas Permeability

Seeded growth of high-performance ZIF-8 membranes in thick wall autoclaves assisted by modulator

Enhancing contaminant rejection efficiency with ZIF-8 molecular sieving in sustainable mixed matrix membranes

In Situ Fabrication of Metal–Organic Framework Thin Films with Enhanced Pervaporation Performance

Enhancing Nanofiltration Selectivity of Metal-Organic Framework Membranes via a Confined Interfacial Polymerization Strategy

Balancing the Crystallinity and Film Formation of Metal-Organic Framework Membranes Through in Situ Modulation for Efficient Gas Separation.

Ultrathin Low‐Crystallinity MOF Membranes Fabricated by Interface Layer Polarization Induction