Abstract:Rare earth elements (REEs) are recognized as one of the most critical elements and considered essential for the development of sustainable energy technologies, lasers, electronics, alloys, catalysts, and other applications. In order to meet the increasing demand to ensure those essential usages, the supply of REEs is however limited from the primary sources. Recovery of REEs from secondary resources, such as discarded electrical and electronic equipment, referred to as electronic waste (e-waste) is consequently crucial. Fluorescent lamps among such wastes are of special concern due to the high quantity of REEs present in them. This article discusses a potential hydrometallurgical method for recovering REEs (yttrium and europium) from fluorescent lamp waste via nitric acid leaching. The effects of leaching factors including acid concentration and temperature were examined. To assist the leaching yields of those metals, the effect of alkaline fusion was specifically examined. The kinetics of both processes, direct- and alkaline fusion-assisted leaching were investigated based on the shrinking core model. In the case of direct leaching, the metal dissolution was controlled by surface chemical reaction with apparent activation energies of 43.9 and 48.1 kJ/mol for yttrium and europium, respectively, in the temperature range 303–333 K. Pretreatment, viz., the alkaline fusion changed the subsequent leaching mechanism to diffusion control with apparent activation energies of 7.4 and 9.5 kJ/mol for the respective metal in the same temperature range. Optimization of the alkaline fusion-assisted acid leaching process was undertaken by applying response surface methodology (RSM) based on the central composite design (CCD). Under the alkaline fusion conditions such as soda/fluorescent powder mass ratio of 0.65 g/g, temperature of 1223 K and reaction time of 7200 s followed by acid leaching (nitric acid concentration – 3.5 M, temperature-323 K, pulp density – 30 g/L and leaching duration – 1200 s), the leaching efficiencies of 92.6% and 99.5% for yttrium and europium, respectively, could be achieved.

Lanthanum removal from spent catalysts of refinery applying electroremediation technique coupled to selective precipitation

Sustainable management of spent fluid catalytic cracking catalyst from a circular economy approach

Recovery of Lanthanum from Aqueous Solutions by Crystallization as Lanthanum Sodium Sulfate Double Salt

Recovery of rare earths from spent FCC catalysts by solvent extraction using saponified 2-ethylhexyl phosphoric acid-2-ethylhexyl ester (EHEHPA)

The recovery of rare earth metals from WEEE leaching solution via liquid-liquid extraction

Adsorption of lanthanum and cerium on chelating ion exchange resins: kinetic and thermodynamic studies

Chelator-induced recovery of rare earths from end-of-life fluorescent lamps with the aid of mechano-chemical energy

Vanadium Recovery from Spent SCR Denitration Catalyst by Reductive Acid Leaching and Ammonium Precipitation

A clean and efficient approach for recovery of vanadium and tungsten from spent SCR catalyst

Use of a Waste-Derived Linde Type-A Immobilized in Agarose for the Remediation of Water Impacted by Coal Acid Mine Drainage at Pilot Scale

Separation of uranium from lanthanides (La, Sm) with sacrificial Li anode in LiCl-KCl eutectic salt

Effect of Steel-refractory Reactions on Removal of Arsenic from Molten Steel with Lanthanum Additions

Leaching of yttrium and europium from fluorescent lamp phosphor powder using nitric acid: kinetics and optimization

Waste-treating-waste: Effective heavy metals removal from electroplating wastewater by ladle slag

Separation of Vanadium and Tungsten in Roasting‐acid Leaching Solutions of the Spent Selective Catalytic Reducing Denitration Catalyst by Co‐extraction Using Hydroxyoxime Extractant‐quaternary Ammonium Salt Extractant LIX984–N263 Extractant

Recovery of Rare Earth Elements from Acidic Mine Waters: A circular treatment scheme utilizing selective precipitation and ion exchange

Separation and Recovery of Vanadium, Nickel, and Aluminum from Acid Leaching Solution of Spent Hydrodesulfurization Catalyst by a Solvent Extraction-Oxalic Acid Precipitation Process

Recovery of Platinum and Palladium from Spent Automotive Catalysts: Study of a New Leaching System Using a Complete Factorial Design

Negligible emissions and highly efficient recovery of Mo, V, and Al from spent hydroprocessing catalysts through alkaline leaching and solvent extraction

Production of high purity rare earth mixture from iron-rich spent fluid catalytic cracking (FCC) catalyst using acid leaching and two-step solvent extraction process

Selective Precipitation of REE-Rich Aluminum Phosphate with Low Lithium Losses from Lithium Enriched Slag Leachate