Abstract:Cryogenic fuels, such as liquid hydrogen and liquid natural gas, emerge as versatile and sustainable energy carriers that are revolutionising various industries including aerospace, automotive, marine, and power generation. Thermoplastic polymers can be a suitable alternative to metal seals in cryogenic fuel systems. However, there is limited study about the behaviours of thermoplastics at cryogenic temperatures, especially at liquid hydrogen temperature of 20 Kelvin (K). This paper measured the tensile properties and coefficient of thermal expansion of three popular thermoplastics: PTFE, PEEK and UHMWPE at room temperature (RT), 77 K and 20 K and at four strain rates. Further microscopic analysis was also conducted to understand the failure mechanisms occurring when combining reduced temperature with varying strain rate. The tensile strength of each polymer increased from RT to 77 K and decreased from 77 K to 20 K. Elastic modulus tended to increase, and the strain recorded at failure decreased when reducing temperature from RT to 20 K. From microscopic observation of PEEK and UHMWPE, a reduction in temperature from 77 K to 20 K resulted in a larger instantaneous fracture, with multi-faceted fracture surfaces containing many small mirror like and opaque or misty sub-regions within the fracture zone. For PTFE, the surface morphology exhibited an insensitivity to the increase in strain rate at cryogenic temperatures, and the microscopy showed how the size of dimples found within the fracture interface became smaller when temperature was reduced from 77 K to 20 K. Finally, PEEK was found to contract much less than PTFE and UHMWPE at 20 K, in agreement to it having the highest glass transition temperature of the three polymers, which is normally a good indicator when attempting to identify polymers that will tend to exhibit smaller contraction at cryogenic temperatures.

The reinforcing effect of cyclic binary secondary amine chain extenders on the cryogenic performance of thermoplastic polyurethane elastomers

Viscoelastic Property Evolution of Thermoplastic Polyurethane During Annealing Treatment and Its Correlation with Segmental Crystallization

High Cis-1,4 Hydroxyl-Terminated Polybutadiene-Based Polyurethanes with Extremely Low Glass Transition Temperature and Excellent Mechanical Properties

Effect of soft segment structure on properties of polyurethane elastomers

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

The Structure and Dynamic Properties of Thermoplastic Polyurethane Elastomer/Hindered Phenol Hybrids

The Crystallisation, Microphase Separation and Mechanical Properties of the Mixture of Ether-Based TPU with Different Ester-Based TPUs

Effects of soft segment molecular weight on the properties of recyclable polyurethanes with low‐temperature multiple shape memory

Regulating the structure of thermoplastic polyurethane elastomers with a diol chain extender to strength performance

Thermoplastic polyurethane with good mechanical and processing performances via blocking and deblocking of isocyanates

Temperature-induced Evolution of Micro-structure and Chain Dynamics in Thermoplastic Polyurethane with Low Hard Segment Content as Studied by In Situ Synchrotron SAXS and Time-Domain NMR Experiments

Cellular Thermoplastic Polyurethane Thin Film: Preparation, Elasticity, and Thermal Insulation Performance

Optimizing TPU performance: The role of mold temperature on injection molding of TPU

Mechanocaloric Effects Characterization of Low-Crystalline Thermoplastic Polyurethanes Fiber

Effect of Two Crystalline Forms on the Multiple Melting and Crystallization Kinetics of Thermoplastic Polyurethane

Rational design of a novel NDI-based thermoplastic polyurethane elastomer with superior heat resistance

Investigation of tensile behavior and molecular structure of the thermoplastic polyurethane sheets injection molded at different mold temperatures

Investigating the Effect of Chain Extender on the Phase Separation and Mechanical Properties of Polybutadiene-Based Polyurethane

Evaluating the potential of thermoplastic polymers for cryogenic sealing applications: strain rate and temperature effects

Microstructure and tensile properties of injection molded thermoplastic polyurethane with different melt temperatures

Fabrication of thermoplastic polyurethane (TPU) / thermoplastic amide elastomer (TPAE) composite foams with supercritical carbon dioxide and their mechanical properties