Abstract:Here we proposed a low-cost and high-efficiency strategy for fabricating novel multi-scale gradient-structured/heterogeneous lamella structured (GS/HLS) pure titanium laminates with superior strength-ductility synergy, by temperature-controlled rolling and subsequent annealing of as-sintered multilayered pure titanium foils with preset grain size gradient. A preliminary gradient structure with the average grain size decreasing from the center layer (alternating stacking of equiaxed fine grain bands and elongated grain bands) to the surface layer (equiaxed fine grains) is formed by optimizing the rolling process. Generalized Schmidt factor analysis based on electron backscatter diffraction indicated that there were slip-dominated and twin-dominated grain refinement mechanisms during the rolling process. In addition to the prismatic slip, two kinds of contraction twinning could be activated to achieve the grain refinement in hard domains where slip systems were hard to be activated. After subsequent annealing, equiaxed fine grains in the laminates did not significantly coarsen, while the elongated grains in the center layer had partially merged and grew up into the elongated coarse grains. Thus, the microstructure of the center layer displayed a typical heterogeneous lamella structure composed of alternately stacking of elongated coarse grains and fine grain bands, together with the grain size gradient, a unique multi-scale heterostructured titanium laminate was formed. Tensile test indicated that the as-rolled Ti laminates exhibited extremely high ultimate tensile strength (UTS) of 930 MPa with an acceptable total elongation to fracture (ETF) of 12.3 %, while GS/HLS Ti laminates after annealing at 425 °C possessed a superior combination of high UTS (823 MPa) and high ETF (22.4 %). The main reason was that the annealing treatment significantly reduced the dislocation density in the elongated coarse grains of GS/HLS Ti laminates. This meant that more geometrically necessary dislocations (GNDs) could accumulate in the plastic deformation process, resulting in the hetero-deformation induced (HDI) strengthening and an extra HDI hardening caused by the unique GS/HLS structure, therefore, an excellent strength-ductility synergy of final GS/HLS Ti laminates was achieved.

Optimizing strength and ductility synergy achieved by multistage strain hardening in gradient recrystallized pure titanium

Ascertaining the microstructural evolution and strengthening mechanisms of the gradient nanostructured pure titanium fabricated by ultrasonic surface rolling process

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Gradient nanostructure, phase transformation, amorphization and enhanced strength-plasticity synergy of pure titanium manufactured by ultrasonic surface rolling

Theory of designing the gradient microstructured metals for overcoming strength-ductility trade-off

Improvement of strength and ductility in a gradient structured Ni fabricated by severe torsion deformation

Achieving superior strength-ductility synergy in a unique multi-scale heterostructured titanium laminate fabricated by temperature-controlled rolling and subsequent annealing

Integrated modeling of the gradient structure evolution during surface mechanical grinding treatment: formation mechanism and mechanical properties

Atomistic Simulations of Mechanical Properties and Deformation Mechanism of Gradient Nanograined Α‐ti

Enhanced Strength-Ductility Synergy in High-Entropy Alloys Via Architecting Three-Level Gradient Hierarchical Nanostructure

Enhancing the ductility in the age-hardened aluminum alloy using a gradient nanostructured structure

A novel through-length gradient structure assisted strength-ductility synergy in hot-rolled tungsten

Gradient structure induced simultaneous enhancement of strength and ductility in AZ31 Mg alloy with twin-twin interactions

Simultaneously enhancing strength and ductility of HCP titanium via multi-modal grain induced extra dislocation hardening

Toward tunable mechanical behavior and enhanced elastocaloric effect in NiTi alloy by gradient structure

Gradient nanostructured steel with superior tensile plasticity

α" martensite engineering: A strategy to achieve high yield strength and low yield ratio synergy for dual-phase titanium alloy

Understanding extra strengthening in gradient nanotwinned Cu using crystal plasticity model considering dislocation types and strain gradient effect

Mechanical property enhancement in gradient structured aluminum alloy by ultrasonic nanocrystalline surface modification

Combining synergetic effects of gradient nanotwins and nanoprecipitates in heterogeneous bronze alloy

Mechanical Properties and Optimal Grain Size Distribution Profile of Gradient Grained Nickel