Abstract:In this study, deposition of copper nanoparticles is synthesized by nanocomposite of carbon nanotube oxide modified with poly citric acid (Cu@CNTO/PCA) and a mixture of amine and poly citric acid (Cu@CNTO-amine/PCA) in different weight concentrations. The thickness, weight, conductivity and resistance of electrical, and hardness of the copper coating on the electrode are calculated after optimizing the parameters of current density (3000 mV), deposition time (45 min), stirring speed (300 rpm), and pH (2–3) at ambient temperature. To analyze the copper coating created on the electrode, the most well-known and widely used techniques are used: Fourier Transform Infrared spectroscopy (FT-IR), Atomic Force Microscope (AFM), Field Emission Scanning Electron Microscope (FE-SEM), and X-ray Energy Diffraction spectroscopy (EDX). The addition of carbon nanotubes enhances the process of nucleation and modification of grains and reduces the oxidation of copper, thus improving the mechanical properties of the copper coating. So, the electrical conductivity of the copper coating reaches 1526 μs.cm −1 in 40 wt.% of Cu@CNTO-amine/PCA nanocomposite at a current density of 3000 mV. Another advantage of this deposition method is at ambient temperature so that the copper coating turns black when the temperature increases to 35 °C. The modification of the surface with poly citric acid causes more dissolution and distribution of CNTO in the electrolyte solution keeps the pH of the environment in the range of 2–3 during deposition and causes the synthesis of shiny copper coatings. Urea-containing nanocomposite increases the electrical conductivity and stability of the copper coating, and compared to graphene oxide nanoparticles, it solves the problems of oxygen functional groups and provides its thermal stability. The results show that the thickness of the encapsulated copper coating layer depends on the chemical composition of the electrolyte, temperature, current duration, and current intensity. By controlling these factors, the thickness of the coated copper layer can be adjusted in the range of 1 to 10 μm. The method employed in this paper enables the controlled synthesis of metal-nanomaterial composites that can potentially be processed into high-capacity electrical conductors.

Enhanced electrical conductivity of copper by nitrogen-doped graphene

Improved Electrical Conductivity of Copper and Nitrogen Functionalized Carbon Nanotubes

Graphene/copper composite films: Interface regulation for enhanced electrical performance

Enhanced Electrical Conductivity and Tensile Strength of Cu/Single-Layer Graphene/Cu Nanomaterials

N-doped Graphene-Based Copper Nanocomposite with Ultralow Electrical Resistivity and High Thermal Conductivity.

Ultrahigh Electrical Conductivity of Graphene Embedded in Metals

Atomic Resolution of Nitrogen-Doped Graphene on Cu Foils.

In-situ graphene enhanced copper wire: A novel electrical material with simultaneously high electrical conductivity and high strength

Chemical Vapor Deposition of N-Doped Graphene through Pre-Implantation of Nitrogen Ions for Long-Term Protection of Copper

Nitrogen-Doped Graphene on Copper: Edge-Guided Doping Process and Doping-Induced Variation of Local Work Function

A general way to manipulate electrical conductivity of graphene

Superior electrical conductivity-strength combination of an in-situ fabricated La 2 O 3 -doped copper/graphene composite conductor

Simultaneously enhanced electrical conductivity and strength in Cu/graphene/Cu sandwiched nanofilm

Meaningful improvements on structural-thermal-electronic properties of copper based on 3D nitrogen (N) doped-carbon nanotubes (CNTs) interface fabricated by nano-self-assembly-sintering-modification

Increasing Electrical Conductivity of Copper Nanocomposite By Carbon Nanotube Oxide Modified With Poly Citric Acid And Urea

Synthesis and characterization of graphene on copper foil via atmospheric pressure chemical vapor deposition method and its impact on electrical properties

Investigation on the novel copper-based composite conductors synergistically improved by in-situ generated graphene and nanoparticles

Fabrication and characterization of copper and copper alloys reinforced with graphene

Design Strategy to Simultaneously Enhance Electrical Conductivity and Strength: Cold-Drawn Copper-Based Composite Wire with In-Situ Graphene

Surface modification on copper particles toward graphene reinforced copper matrix composites for electrical engineering application