Abstract:Carbon solely can form a lot of nanostructures, such as zero-dimensional nanosphere, one-dimensional nanotube and two-dimensional graphene. They perform differently in Li-ion and Li-S batteries. It is worth noting that CNTs and graphene are not appropriate to be used as electroactive materials for Li-ion or Li-S batteries for four reasons. First, when CNTs and graphene are used as an anode, they often exhibit high specific capacities during the first lithiation step, but a large fraction of lithium ions is irreversibly consumed instead of reversibly stored, leading to a low Coulombic efficiency of the cell. Second, a graphene-based anode has a large voltage hysteresis in the charge/discharge curves. Third, it has been reported a CNT-based anode lacks a steady voltage plateau with large change in voltage during discharge. Fourth, despite their high initial capacities, graphene and CNT-based anodes often suffer from fast capacity decay after a few tens of cycles. Continuous efforts have been made to build better lithium batteries with a higher energy density and wider applicability, including both current state-of-the-art Li-ion batteries and near-term Li-S batteries. Because the behavior of a rechargeable battery is mainly based on the performance of its anode and cathode, designing advanced electrode materials as well as electrode with tailored compositions and structures has been the hot topic in recent years. The role of carbon nano-materials to construct electrode materials and tailored electrodes in Li-ion and Li-S batteries in high performance was reviewed in the paper from three aspects. Firstly, the role of carbon nano-materials in modifying the electroactive materials was discussed from three aspects:electron- and ion-transport facilitators, immobilization sites and volume expansion buffering. Secondly, the role of carbon nano-materials in optimizing the inactive components was considered as follows:conducting additives, current collectors and conductive interlayers. Thirdly, the role of carbon nano-materials in designing the bendable and stretchable devices are discussed from three aspects:conductive phases in nonconductive substrates, flexible current collectors and freestanding composite electrode. Finally, perspectives on future development of Li-ion and Li-S batteries were presented. It is considered that multi-functional carbon nano-materials will be main research focus in the future.

Carbon nanosphere synthesis and applications for rechargeable batteries

Synthesis and Applications of B, N Co-Doped Carbons for Zinc-Based Energy Storage Devices

Carbon nanomaterials-constructed electrodes for rechargeable metal-ion batteries

Advanced Nanostructured Cathode and Anode Materials for High-Performance Li-Ion Batteries

Research Progress on Carbon Nano-Materials to Construct Li-ion and Li-S Batteries of High Performance

Multiscale Porous Carbon Nanomaterials for Applications in Advanced Rechargeable Batteries

Carbon nanotube-based nanomaterials for high-performance sodium-ion batteries: Recent advances and perspectives

Recent Advances in Nanostructured Carbon for Sodium-Ion Batteries

Application of Carbon Nanotube-Based Materials as Interlayers in High-Performance Lithium-Sulfur Batteries: A Review

Synthesis and applications of carbon nanospheres: A review

Advanced nanostructured carbon-based materials for rechargeable lithium-sulfur batteries

Carbon nanotube-based materials for lithium–sulfur batteries

Advanced Nanostructured Anode Materials For Sodium-Ion Batteries

Facile “Lotus Blooming” Strategy to Synthesize a 3D Carbon Nanosheet/Carbon Nanotube Framework with Embedded Co Nanocrystals for High-Performance Lithium–Sulfur Batteries

Nanostructured anode materials for lithium-ion batteries: principle, recent progress and future perspectives

Structure Design and Composition Engineering of Carbon‐Based Nanomaterials for Lithium Energy Storage

Nanostructured Carbon for Energy Storage and Conversion

Macroscopic‐Scale Three‐Dimensional Carbon Nanofiber Architectures for Electrochemical Energy Storage Devices

Sp2 Nanocarbon Materials for Lithium Ion Battery Applications

Advanced Carbon Sphere-Based Hybrid Materials Produced by Innovative Aerosol Process for High-Efficiency Rechargeable Batteries

Recent Advances and Perspectives of Carbon-Based Nanostructures as Anode Materials for Li-ion Batteries