Abstract:Carbon solely can form a lot of nanostructures, such as zero-dimensional nanosphere, one-dimensional nanotube and two-dimensional graphene. They perform differently in Li-ion and Li-S batteries. It is worth noting that CNTs and graphene are not appropriate to be used as electroactive materials for Li-ion or Li-S batteries for four reasons. First, when CNTs and graphene are used as an anode, they often exhibit high specific capacities during the first lithiation step, but a large fraction of lithium ions is irreversibly consumed instead of reversibly stored, leading to a low Coulombic efficiency of the cell. Second, a graphene-based anode has a large voltage hysteresis in the charge/discharge curves. Third, it has been reported a CNT-based anode lacks a steady voltage plateau with large change in voltage during discharge. Fourth, despite their high initial capacities, graphene and CNT-based anodes often suffer from fast capacity decay after a few tens of cycles. Continuous efforts have been made to build better lithium batteries with a higher energy density and wider applicability, including both current state-of-the-art Li-ion batteries and near-term Li-S batteries. Because the behavior of a rechargeable battery is mainly based on the performance of its anode and cathode, designing advanced electrode materials as well as electrode with tailored compositions and structures has been the hot topic in recent years. The role of carbon nano-materials to construct electrode materials and tailored electrodes in Li-ion and Li-S batteries in high performance was reviewed in the paper from three aspects. Firstly, the role of carbon nano-materials in modifying the electroactive materials was discussed from three aspects:electron- and ion-transport facilitators, immobilization sites and volume expansion buffering. Secondly, the role of carbon nano-materials in optimizing the inactive components was considered as follows:conducting additives, current collectors and conductive interlayers. Thirdly, the role of carbon nano-materials in designing the bendable and stretchable devices are discussed from three aspects:conductive phases in nonconductive substrates, flexible current collectors and freestanding composite electrode. Finally, perspectives on future development of Li-ion and Li-S batteries were presented. It is considered that multi-functional carbon nano-materials will be main research focus in the future.

Advanced nanostructured carbon-based materials for rechargeable lithium-sulfur batteries

Nanostructured Host Materials for Trapping Sulfur in Rechargeable Li–S Batteries: Structure Design and Interfacial Chemistry

A Review of Electrospun Carbon-based Nanofibers Materials Used in Lithium-Sulfur Batteries

Nanostructured Β-Li3ps4 for All-Solid Lithium-Sulfur Batteries

Review of Carbon Materials for Advanced Lithium–sulfur Batteries

Recent Advances in Cathode Materials for Rechargeable Lithium–sulfur Batteries

Development of Graphene-based Materials for Lithium-Sulfur Batteries

Review of Carbon Materials for Lithium‐Sulfur Batteries

Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries

Novel construction of nanostructured carbon materials as sulfur hosts for advanced lithium‐sulfur batteries

Advances in High Sulfur Loading Cathodes for Practical Lithium‐Sulfur Batteries

Application of Carbon Nanotube-Based Materials as Interlayers in High-Performance Lithium-Sulfur Batteries: A Review

Research Progress on Carbon Nano-Materials to Construct Li-ion and Li-S Batteries of High Performance

Review—From Nano Size Effect to in Situ Wrapping: Rational Design of Cathode Structure for High Performance Lithium−Sulfur Batteries

Research Progress of Sulfur/Carbon Composite Cathode Materials and the Corresponding Safe Electrolytes for Advanced Li-S Batteries

Material design and structure optimization for rechargeable lithium-sulfur batteries

Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries

Advances and Prospects of 2D Graphene‐Based Materials/Hybrids for Lithium Metal–Sulfur Full Battery: From Intrinsic Property to Catalysis Modification

Progress of Lithium/Sulfur Batteries Based on Chemically Modified Carbon

Multifunctionality of Carbon-based Frameworks in Lithium Sulfur Batteries

Covalent Organic Framework Based Lithium–Sulfur Batteries: Materials, Interfaces, and Solid‐State Electrolytes