Q. W. Yang,Yong Liu,X. T. Ding,L. W. Yan,D. Q. Liu,W. M. Xuan,L. Y. Chen,J. Rao,X. M. Song,Z. Cao,J. H. Zhang,X. R. Duan,W. C. Mao,C. P. Zhou,X. D. Li,S. J. Wang,M. N. Bu,Y. H. Chen,C. H. Cui,Z. Y. Cui,Z. C. Deng,J. Q. Dong,B. B. Feng,Q. D. Gao,W. Y. Hong,H. T. Hu,Y. Huang,Z. H. Kang,T. Lan,B. Li,G. S. Li,H. J. Li,Qiang Li,Qing Li,W. Li,Y. G. Li,Z. J. Li,Yi Liu,Z. T. Liu,C. W. Luo,X. H. Mao,Y. D. Pan,J. F. Peng,K. Shao,Z. B. Shi,X. Y. Song,A. K. Wang,H. Wang,M. X. Wang,Q. M. Wang,Y. Q. Wang,Z. G. Xiao,Y. F. Xie,L. H. Yao,L. Y. Yao,C. X. Yu,B. S. Yuan,K. J. Zhao,Y. Z. Zheng,G. W. Zhong,H. Y. Zhou,Y. Zhou,J. C. Yan,C. H. Pan

Abstract:The recent experiment results of the HL-2A tokamak are presented in this paper. Up to now, the stable and reproducible discharges with divertor configuration have been obtained, under the main plasma parameters of IP = 400 kA, BT = 2.65 T, Ne ~ 6.0×10 m and the discharge duration ~ 3.0 s, using the reliable feedback control. Siliconization is the normal wall conditioning method on HL-2A and after that, the impurity concentration and radiated power can be obviously suppressed after siliconization. Advanced scenario with weak positive/negative current shear, calculated by TRANSP codes using experimental data, is achieved by the central fuelling of the pellet injection. The supersonic molecular beam injection (SMBI) with liquid nitrogen temperature gas is used. It is proved that the low temperature SMBI can form the hydrogen cluster and penetrate into plasma more deeply and efficiently. The particle diffusion coefficient is obtained as 0.5~1.5m/s at plasma peripheral area. The symmetries (m = 0~1, n = 0) of the directly measured low frequency (7~9 kHz) electric potential and field are simultaneously observed for the first time by a novel designed Langmuir probe system. The impurity diffusion coefficient and convection velocity are determined by using laser blow-off system and transport code. In disruption studies, a new criterion for disruption prediction is given according to the MHD activity features and statistic analysis, and the plasma current quench time increases from about 5 ms to 20 ms with noble gas injection. The sawtooth character in on-axis ECRH experiment is investigated, and a persistent m=1 oscillation induced by SMBI and pellet injection is found to be a thermal fluctuation instead of magnetic island. The detachment characteristics of HL-2A divertor are numerically and experimentally studied using code SOLPS5.0 and measured data. The long divertor legs and thin divertor throats in HL-2A pose MHD shaping problems resulting in momentum losses even at low densities and strongly enhanced main chamber losses.

Commissioning and initial operation of HL-3 vacuum system

OV / 4-5 1 Overview of Experimental Results on the HL-2 A Tokamak

OV / 4-3 1 Overview of Experimental Results on HL-2 A

Overview of Experimental Results on the HL-2A Tokamak

Overview of Hl-2a Experiment Results

Recent advance progress of HL-3 experiments

China’s Technological Achievements on ITER Enhanced Heat Flux First Wall in the Pre-Pa Qualification

Plasma initiation and preliminary magnetic control in the HL-2M tokamak

Status of the Cryogenic System of the HL-2M Tokamak

Operation of Hl-2a Tokamak

Construction of the Hl-2a Tokamak

Progress of the HL-2A Project

Development and Application of 3 . 7 GHz LHCD System on HL-2 A and Development of RF Heating System on HL-2 M

Design and experiment results of HL-3 baking system

Concept Design of Primary Heat Transfer System for CFETR Vacuum Vessel

Engineering Development Aspects of the HL-2A Tokamak

OV / 4-1 Overview of HL-2 A Experiment Results

Status and Plan of the HL-2A Project

COMMISSIONING TEST STUDY ON RESIDUAL HEAT REMOVAL VENTILATION IN SPENT FUEL CANISTER UNLOADING STAGE OF HTR-PM PROJECT

Commissioning Procedures of the 10 Mw High Temperature Gas-Cooled Reactor-Test Module

Recent advances in the HL-2A tokamak experiments