Abstract:This paper presents an overview of MOS transistor modeling for RF integrated circuit design. It starts with the description of a physical equivalent circuit that can easily be implemented as a SPICE subcircuit. The MOS transistor is divided into an intrinsic part, representing mainly the active part of the device, and an extrinsic part responsible for most of the parasitic elements. A complete charge-based model of the intrinsic part is presented. The main advantage of this new charge-based model is to provide a simple and coherent description of the dc, ac, nonquasi-static (NQS), and noise behavior of the intrinsic MOS that is valid in all regions of operation. It is based on the forward and reverse charges $q_f$ and $q_r$ defined as the mobile charge densities, evaluated at the source and at the drain. This intrinsic model also includes a new simplified NQS model that uses a bias and frequency normalization allowing one to describe the high-order frequency behavior with only two simple functions. The extrinsic model includes all the terminal access series resistances, and particularly the gate resistance, the overlap, and junction capacitances as well as a substrate network. The latter is required to account for the signal coupling occurring at RF from the drain to the source and the bulk, through the junction capacitances. The bias dependence of these components is discussed, mainly focusing on the overlap capacitances. The noise model is then presented, including the effect of the substrate resistances on the RF noise parameters. All the aspects of the model are validated for a 0.25-$\mu$m CMOS process. The simulation results of the $Y$-parameters, the transit frequency, the noise parameters, and the RF large-signal characteristics show an excellent agreement with the measured data.

Validation and parameter extraction of a compact equivalent circuit model for an RF CMOS transistor

An Improved RF MOSFET Model Accounting Substrate Coupling among Terminals

Scalable RFCMOS Model for 90 Nm Technology

RF CMOS Transistor Equivalent Circuit Model Up to 66 GHz

A 220-Ghz Compact Equivalent Circuit Model of CMOS Transistors

A Millimeter‐wave Scalable Small Signal Model of RF CMOS Transistor Against Number of Fingers

Accurate modeling and parameter extraction for MOS transistors valid up to 10 GHz

RF Equivalent‐circuit Model of Interconnect Bends Based on S‐parameter Measurements

An Improved Small Signal Equivalent Circuit Modeling Based On 65nm CMOS Technology

An MOS transistor model for RF IC design valid in all regions of operation

MOS transistor modeling for RF IC design

Equivalent Circuit Model of On-Wafer Interconnects for Cmos Rfics

Modeling and Optimization of Substrate Electromagnetic Coupling and Isolation in Modern Lightly Doped CMOS Substrate

Accurate and Computationally Efficient Modeling of Nonquasi Static Effects in MOSFETs for Millimeter-Wave Applications

A W-Band Small-Signal Equivalent Circuit Modeling Based on 28nm CMOS Process

A High-Frequency MOS Transistor Model and its Effects on Radio-Frequency Circuits

Development of a RF large signal MOSFET model, based on an equivalent circuit, and comparison with the BSIM3v3 compact model

An Improved Small-Signal Equivalent Circuit Model Considering Channel Current Magnetic Effect

66 GHz Bias‐dependent Equivalent Circuit Model for CMOS Transistor Based on 90 Nanometers CMOS Technology