Abstract:We have investigated the physical origin of anomalous in-plane thermal expansion (TE) anisotropy leading to invar-like behavior and negative TE in nanostructured NiTi sheets manufactured via severe cold-rolling. The roles of grain size (GS), crystallographic texture, thermally-induced phase transformation, and intrinsic (lattice level) TE of austenite (B2) and martensite (B19′) phases on the macroscopic TE behavior are addressed. It is shown that by controlling the cold-rolling thickness reduction and heat-treatment temperature the coefficient of thermal expansion (CTE) can be controlled in a wide range from positive (α ∼ 2.1 × 10−5 K−1) to negative (α ∼ −1.1 × 10−5 K−1) via in-plane anisotropy of TE. A very small CTE of α ∼ −5.3 × 10−7 K−1 (invar-like behavior) in a wide temperature window of 230 K (353–123 K) is obtained at an angle of 33.5° to the rolling direction (RD) of the severely cold-rolled sheet. TEM and XRD studies show that the microstructure underlying such anomalous TE behavior consists of a mixture of B2 nano-grains and retained/residual deformation-induced martensite and that the observed anomalous TE anisotropy is due to the intrinsic anisotropic TE of residual martensite. The invar-like behavior is the result of the cancellation of the positive TE of austenite phase with the negative TE of residual martensite along 33.5° to the RD. A simple rule of mixture model incorporating the intrinsic TE of B2 and B19′ lattices and the texture coefficients of the sample is proposed which successfully captures the anomalous in-plane TE anisotropy. The discovery of high dimensional stability over a wide temperature window along with temperature insensitive non-hysteretic linear superelasticity of the severely-deformed NiTi opens up a new route for designing stable SMAs for applications in ragged environments.

On Zero or Negative Thermal Dilatation and Phase Transformations in Cold-Worked Fe–Ni Invar Alloys

Origin of zero and negative thermal expansion in severely-deformed superelastic NiTi alloy

Investigation of Temperature-Dependent Magnetic Properties and Coefficient of Thermal Expansion in Invar Alloys

Effect of High Temperature Deformation on the Low Thermal Expansion Behavior of FE-29%NI-17%CO Alloy

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

Interaction Between Recrystallization and Helium Behavior in Cold-Rolled Nickel

The mechanism of negative linear thermal expansion behavior of cold-rolled Ti-34Nb alloy

Invar Effect in the Wide and Higher Temperature Range by Coherent Coupling in Fe‐Based Alloy

Negative Thermal Expansion over a Wide Temperature Range in Fe-Doped MnNiGe Composites

In situ study of non-equilibrium solidification of CoCrFeNi high-entropy alloy and CrFeNi and CoCrNi ternary suballoys

Zero thermal expansion in non-stoichiometric and single-phase (Hf,Nb)Fe2.5 alloy

Effect of Heat Treatments on Magnetic Properties and Thermal Expansion Behavior in Two Distinct Types of Fe-Ni Invar Alloys

Regulation of the Concentration Heterogeneity and Thermal Expansion Coefficient in the Metastable Invar FeNi31.1 Alloy

Regularities in the Evolution of Thermoelastic Martensitic Transformations during Cooling/Heating in the Free State and under Load of Titanium Nickelide Alloyed with Niobium

Negative thermal expansion and phase transition of low-temperature Mg2NiH4

Influence of Heat Treatments on Martensitic Transformations and Elastocaloric Effect in Two-Phase (β + γ) NiFeGa Alloys

Mixed ground state in Fe-Ni Invar alloys

Negative and Zero Thermal Expansion NiTi Superelastic Shape Memory Alloy by Microstructure Engineering

Effect of cold-drawn-induced amorphous phase on microstructure and pseudoelasticity properties of nanocrystalline NiTi alloys

A simple theory of the Invar effect in iron-nickel alloys

Nano-precipitation leading to linear zero thermal expansion over a wide temperature range in Ti22Nb