Abstract:We experimentally investigate the limits of pulse duration in a Kerr-lens mode-locked Yb:YAG thin-disk laser (TDL) oscillator. Thanks to its excellent mechanical and optical properties, Yb:YAG is one of the most used gain materials for continuous-wave and pulsed TDLs. In mode-locked operation, its 8-nm wide gain bandwidth only directly supports pulses with a minimum duration of approximately 140 fs. For achieving shorter pulses, a Kerr-lens mode-locked TDL oscillator can be operated in the strongly self-phase modulation (SPM) broadened regime. Here, the spectral bandwidth of the oscillating pulse exceeds the available gain bandwidth by generating additional frequencies via SPM inside the Kerr medium. In this work, we study and compare different laser configurations in the strongly SPM-broadened regime. Starting with a configuration providing 84-fs pulses at 69 W average power at 17 MHz repetition rate, we reduce the pulse duration by optimizing various mode-locking parameters. One crucial parameter is the dispersion control which was provided by in-house-developed dispersive mirrors produced by ion-beam sputtering (IBS). We discuss trade-offs in average power, pulse duration, efficiency, and intra-cavity peak power. For the configuration operating at the highest SPM-broadening, we achieve a minimum pulse duration of 27 fs, which represents the shortest pulse duration directly generated by any ultrafast TDL oscillator. The corresponding full width at half maximum (FWHM) spectral bandwidth exceeds more than five times the FWHM gain bandwidth. The average output power of 3.3 W is moderate for ultrafast TDL oscillators, but higher than other Yb-based laser oscillators operating at this pulse duration. Additionally, the corresponding intra-cavity peak power of 0.8 GW is highly attractive for implementing intra-cavity extreme nonlinear optical interactions such as high harmonic generation.

Kerr-Lens Mode-Locked Yb:BaF2 Laser

Diode-Pumped Kerr-Lens Mode-Locked Yb: Lyso Laser with 61fs Pulse Duration

56-fs diode-pumped SESAM mode-locked Yb:YAl3(BO3)4 laser

Diode-pumped mode-locked Yb:Sc2SiO5 laser generating 38 fs pulses

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

Kerr-lens mode-locking of an Yb:SALLO laser generating 25 fs pulses at 1090 nm

Kerr-lens mode-locking of an Yb:CLNGG laser

Sub-50 fs diode-pumped SESAM mode-locked Yb:SrF2 laser

Kerr-lens mode-locked femtosecond Yb:CALYO oscillator with more than 20-W average power

Kerr-lens mode-locked 49-fs Tm3+:YScO3 single-crystal laser at 2.1 µm

Sub-30-fs Yb:YAG thin-disk laser oscillator operating in the strongly self-phase modulation broadened regime

Femtosecond pulse generation from a semiconductor saturable absorber mirror mode-locked Yb:LuYAG mixed crystal laser

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Pushing the tuning limits of femtosecond Yb-based solid-state lasers to 1 µm: a Yb:YVO4 laser tunable down to 1004 nm

Sub-50 fs diode-pumped SESAM mode-locked Yb:SrF_2 laser

SESAM mode-locked Yb:CaGdAlO4 thin disk laser with 62 fs pulse generation

Sub-100 fs pulse generation from dispersion-managed mode-locked Er:ZBLAN fiber laser at 2.8 μm

Distributed Kerr Lens Mode-Locked Yb:YAG Thin-Disk Oscillator

Continuous-wave and SESAM mode-locked operation of a Yb:YSr3(PO4)3 laser

Mode-locked Yb:CALGO laser with high peak power sub-100 fs pulses at 26.9 MHz repetition rate

Mode-Locked Yb:Luag Ceramics Laser