Abstract:Interfacial trap-assisted non-radiative recombination and residual stress impede the further increase of power conversion efficiency (PCE) and stability of the methylammonium-free (MA-free) perovskite solar cells (PSCs). Here, we report an interfacial defect passivation and stress release strategy through employing the multi-active-site Lewis base ligand (i.e., (5-mercapto-1,3,4-thiadiazol-2-ylthio)acetic acid (MTDAA)) to modify the surface and grain boundaries (GBs) of MA-free perovskite films. Both experimental and theoretical results confirm strong chemical interactions between multiple active sites in the MTDAA molecule and undercoordinated Pb2+ at the surface or GBs of perovskite films. It is demonstrated theoretically that multi-active-site adsorption is more favorable thermodynamically as compared to single-active-site adsorption, regardless of PbI2 termination and formamidinium iodide (FAI) termination types. MTDAA modification results in much reduced defect density, increased carrier lifetime, and almost thoroughly released interfacial residual stress. Upon MTDAA passivation, the PCE is boosted from 20.26% to 21.92%. The unencapsulated device modified by MTDAA maintains 99% of its initial PCE after aging under the relative humidity range of 10–20% for 1776 h, and 91% after aging at 60 °C for 1032 h.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00794?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00794</a>.Experimental Section (including materials, device fabrication, and characterization), J–V curves, XRD patterns, UV–vis absorption spectra, Tauc plot, SEM images, FTIR spectra, PL spectra, Nyquist plots, equivalent circuit, Mott–Schottky plot, statistical diagrams of photovoltaic parameters, chemical structures of the single-active-active passivation molecules, stability data, photovoltaic performance of the devices based on different MA-free perovskite compositions, TRPL fitting results, summary of champion and average photovoltaic parameters of the devices modified by different concentrations of MTDAA, summary of photovoltaic performance of reported high-efficiency CsFA-based MA-free PSCs to date, and photovoltaic performance of the devices based on different modifiers (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00794/suppl_file/nz1c00794_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Boosting the performance of MA-free inverted perovskite solar cells via multifunctional amino acids additives

Boosting the Performance of MA-free Inverted Perovskite Solar Cells Via Multifunctional Amino Acid Additives

Enhancing the Performance and Stability of Perovskite Solar Cells through the Introduction of the Multifunctional Additive 5‐Amino‐2‐Fluorobenzoic Acid

Synergistic Improvement of Perovskite Film Quality for Efficient Solar Cells Via Multiple Chloride Salt Additives

Molecular interactions and functionalities of an organic additive in a perovskite semiconducting device: a case study towards high performance solar cells

Phosphonate Diacid Molecule Induced Crystallization Manipulation and Defect Passivation for High‐Performance Inverted MA‐Free Perovskite Solar Cells

Multifunctional Additives to Enhanced Perovskite Solar Cell Performance

Manipulating the Interfacial Dipole Toward High-Performance Perovskite Solar Cells Via Conjugated Organic Ammonium

Multiple functional groups synergistically improve the performance of inverted planar perovskite solar cells

Defect Passivation and Crystallization Regulation for Efficient and Stable Formamidinium Lead Iodide Solar Cells with Multifunctional Amidino Additive

Enhancing Stability and Photovoltaic Performance of Perovskite Solar Cells via 5‐Ammonium Acid Additive

Interfacial Defect Passivation and Stress Release via Multi-Active-Site Ligand Anchoring Enables Efficient and Stable Methylammonium-Free Perovskite Solar Cells

Collaborative Strategy of Multifunctional Groups in Trifluoroacetamide Achieving Efficient and Stable Perovskite Solar Cells

Natural Product Additive with Multifunctional groups Enhancing the Efficiency and Stability of Perovskite Solar Cells

Interface engineering for highly efficient carbon-based all-inorganic perovskite solar cells using functionalized amino acid salts

Trap State Passivation by Rational Ligand Molecule Engineering toward Efficient and Stable Perovskite Solar Cells Exceeding 23% Efficiency

Efficient Charge Collection Promoted by Interface Passivation Using Amino Acid Toward High Performance Perovskite Solar Cells

Dual‐Interface Modification for Inverted Methylammonium‐Free Perovskite Solar Cells of 25.35% Efficiency with Balanced Crystallization

Reducing surficial and interfacial defects by thiocyanate ionic liquid additive and ammonium formate passivator for efficient and stable perovskite solar cells

Interface Passivation of Perovskite Solar Cells by Fmoc-Ala-OH Amino Acids

Improved Efficiency and Stability of Perovskite Solar Cells Induced by CO Functionalized Hydrophobic Ammonium‐Based Additives