Abstract:Interfacial trap-assisted non-radiative recombination and residual stress impede the further increase of power conversion efficiency (PCE) and stability of the methylammonium-free (MA-free) perovskite solar cells (PSCs). Here, we report an interfacial defect passivation and stress release strategy through employing the multi-active-site Lewis base ligand (i.e., (5-mercapto-1,3,4-thiadiazol-2-ylthio)acetic acid (MTDAA)) to modify the surface and grain boundaries (GBs) of MA-free perovskite films. Both experimental and theoretical results confirm strong chemical interactions between multiple active sites in the MTDAA molecule and undercoordinated Pb2+ at the surface or GBs of perovskite films. It is demonstrated theoretically that multi-active-site adsorption is more favorable thermodynamically as compared to single-active-site adsorption, regardless of PbI2 termination and formamidinium iodide (FAI) termination types. MTDAA modification results in much reduced defect density, increased carrier lifetime, and almost thoroughly released interfacial residual stress. Upon MTDAA passivation, the PCE is boosted from 20.26% to 21.92%. The unencapsulated device modified by MTDAA maintains 99% of its initial PCE after aging under the relative humidity range of 10–20% for 1776 h, and 91% after aging at 60 °C for 1032 h.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsenergylett.1c00794?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsenergylett.1c00794</a>.Experimental Section (including materials, device fabrication, and characterization), J–V curves, XRD patterns, UV–vis absorption spectra, Tauc plot, SEM images, FTIR spectra, PL spectra, Nyquist plots, equivalent circuit, Mott–Schottky plot, statistical diagrams of photovoltaic parameters, chemical structures of the single-active-active passivation molecules, stability data, photovoltaic performance of the devices based on different MA-free perovskite compositions, TRPL fitting results, summary of champion and average photovoltaic parameters of the devices modified by different concentrations of MTDAA, summary of photovoltaic performance of reported high-efficiency CsFA-based MA-free PSCs to date, and photovoltaic performance of the devices based on different modifiers (<a class="ext-link" href="/doi/suppl/10.1021/acsenergylett.1c00794/suppl_file/nz1c00794_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Phosphonate Diacid Molecule Induced Crystallization Manipulation and Defect Passivation for High‐Performance Inverted MA‐Free Perovskite Solar Cells

Defect Passivation in CH3NH3PbI3 Films Using Alkali Metal Fluoride Additives for Highly Efficient Perovskite Solar Cells

Synergetic Co‐Modulation of Crystallization and Co‐Passivation of Defects for FAPbI 3 Perovskite Solar Cells

Enhancing the Performance and Stability of Perovskite Solar Cells through the Introduction of the Multifunctional Additive 5‐Amino‐2‐Fluorobenzoic Acid

Regulating the Crystallization of FAPbI3‐Based Perovskite with a Furan Substituted Ethylammonium Additive for Achieving Highly Efficient Solar Cells

Reducing surficial and interfacial defects by thiocyanate ionic liquid additive and ammonium formate passivator for efficient and stable perovskite solar cells

Defect Passivation and Crystallization Regulation for Efficient and Stable Formamidinium Lead Iodide Solar Cells with Multifunctional Amidino Additive

Stable perovskite solar cells with 25.17% efficiency enabled by improving crystallization and passivating defects synergistically

Multidentate Coordination Induced Crystal Growth Regulation and Trap Passivation Enables over 24% Efficiency in Perovskite Solar Cells

Synergistic Crystallization and Passivation by a Single Molecular Additive for High-Performance Perovskite Solar Cells

The Molecular Additive N-Acetyl-L-Phenylalanine Delays the Crystallization and Suppresses the Phase Impurity for Achieving Triple-Cation Perovskite Solar Cells with Efficiency over 25.

Ammonium Sulfate to Modulate Crystallization for High-Performance Rigid and Flexible Perovskite Solar Cells

Trap State Passivation by Rational Ligand Molecule Engineering toward Efficient and Stable Perovskite Solar Cells Exceeding 23% Efficiency

Perovskite Surface Passivation Using Thiophene-Based Small Molecules for Efficient and Stable Solar Cells

In Situ Dual‐Interface Passivation Strategy Enables The Efficiency of Formamidinium Perovskite Solar Cells Over 25%

Self‐Induced Bi‐interfacial Modification via Fluoropyridinic Acid For High‐Performance Inverted Perovskite Solar Cells

Highly Efficient and Stable Perovskite Solar Cells: Competitive Crystallization Strategy and Synergistic Passivation

Facile synthesized acetamidine thiocyanate with synergistic passivation and crystallization for efficient perovskite solar cells

Manipulated Crystallization and Passivated Defects for Efficient Perovskite Solar Cells via Addition of Ammonium Iodide

Interfacial Defect Passivation and Stress Release via Multi-Active-Site Ligand Anchoring Enables Efficient and Stable Methylammonium-Free Perovskite Solar Cells

Tailoring Defect Passivation for Efficient and Stable Perovskite Solar Cells via an Ionic Liquid Additive