Abstract:Perovskite light-emitting diodes (PeLEDs) exhibit high external quantum efficiencies (EQEs), emerging as a nextgeneration lighting and display technology. Nevertheless, they suffer from severe efficiency roll-off at high luminance, particularly in the case of blue and green emissions, which is one of the major bottlenecks in their industrial applications. Here, we attack this problem using a rare-earth metal, Yb, as cathode interface layer (CIL) for green PeLEDs. By adopting a new device configuration of ITO/TFB/FA-based quasi-2D perovskite/TPBi/Yb/Ag, we achieved a peak current efficiency (CE) of 22.3 cd/A with a corresponding EQE of 5.28% and a high maximum luminance of 19 160 cd/m(2). Importantly, the maximum CE of 22.0 cd/A at 2000 cd/m(2) slightly decreased to 16.8 cd/A at 5000 cd/m(2) and maintained a still-decent value of 12.0 cd/A at a high luminance of 10 000 cd/m(2), exhibiting a remarkably low efficiency roll-off. Our Yb-incorporated devices significantly outperformed the PeLEDs containing conventional CILs, including Mg and Liq, in terms of peak efficiency, efficiency roll-off, and operational lifetime. We attribute this encouraging performance to barrier-free, efficient electron injection enabled by the low work function of Yb (2.6 eV), which led to a high electron current, nearly approaching the hole current in hole-dominant PeLEDs, as confirmed by the singlecarrier device measurements. In addition, we also present Yb-incorporated PeLEDs containing Cs-based quasi-2D perovskite as the emissive layer, which displayed an impressive CE of 51.3 cd/A with a corresponding EQE of 16.4% and a maximum luminance of 14 240 cd/m(2), and still demonstrated a reduced efficiency roll-off comparing to that of the Liq-based equivalent. These results unveil the inspiring prospects of Yb as an efficient CIL for PeLEDs toward high efficiency with curtailed roll-off.

Balancing Charge Injection via a Tailor-Made Electron-Transporting Material for High Performance Blue Perovskite QLEDs

A Wide-Bandgap, High-Mobility Electron-Transporting Material Containing a 9,9′-Spirobithioxanthene Skeleton

High-Performance Blue Quasi-2D Perovskite Light-Emitting Diodes via Balanced Carrier Confinement and Transfer

High-performance Sky-Blue Quasi-2D Perovskite Light-Emitting Diodes Via Synergistic Defect Passivation and Phase Narrowing Strategies

Balanced charge transport and enhanced performance of blue quantum dot light-emitting diodes via electron transport layer doping

Highly efficient blue light-emitting diodes with tunable wavelength using vertically graded bandgap quasi-2D perovskite films

Charge Carrier Regulation for Efficient Blue Quantum-Dot Light-Emitting Diodes Via a High-Mobility Coplanar Cyclopentane[b]thiopyran Derivative

Thermodynamics-Induced Injection Enhanced Deep-Blue Perovskite Quantum Dot LEDs

Boosting Efficiency and Curtailing the Efficiency Roll-Off in Green Perovskite Light-Emitting Diodes Via Incorporating Ytterbium As Cathode Interface Layer.

Homogenizing Energy Landscape for Efficient and Spectrally Stable Blue Perovskite Light-Emitting Diodes

Homogenizing Energy Landscape for Efficient and Spectrally Stable Blue Perovskite Light‐Emitting Diodes

Enhancing performance in blue quantum-dot light-emitting diodes by using a deep HOMO carbazol-phenyl-triazine small molecule blended hole transporting layer

Surficial Homogenic Effect Enables Highly Stable Deep-Blue Perovskite Light-Emitting Diodes

Manipulation of Charge Dynamics for Efficient and Bright Blue Perovskite Light‐Emitting Diodes with Chiral Ligands

Efficient NIR Perovskite Light-Emitting Diodes Enabled by Incorporating an Anthracene Derivative As a Bifunctional Electron Transport Layer

High‐n Phase Suppression for Efficient and Stable Blue Perovskite Light‐Emitting Diodes

Synergistical Electroluminescent Manipulation for Efficient Blue Perovskite Light-Emitting Diodes Through Interfacial Nucleation Seeding

Highly Efficient Blue Light‐Emitting Diodes Based on Perovskite Film with Vertically Graded Bandgap and Organic Grain Boundary Passivation Shells

Interfacial Nucleation Seeding for Electroluminescent Manipulation in Blue Perovskite Light‐Emitting Diodes

Co‐Interlayer Engineering for Homogenous Phase Quasi‐2‐D Perovskite and High‐Performance Deep‐Blue Light‐Emitting Diodes

Modulating low-dimensional domains of self-assembling quasi-2D perovskites for efficient and spectra-stable blue light-emitting diodes