Determination of Residual Stress Distributions in Polycrystalline Alumina using Fluorescence Microscopy.

C. A. Michaels,R. Cook

DOI: https://doi.org/10.1016/J.MATDES.2016.06.063

2016-10-05

Materials & Design (1980-2015)

Abstract:

What problem does this paper attempt to address?

Deep‐Red Perovskite Light‐Emitting Diodes with External Quantum Efficiency Exceeding 21% Enabled by Ligand‐Modulated Dimensionality Control

Zhe Liu,Xiaomei Peng,Shiyu Xing,Weidong Qiu,Mengke Li,Chao Shen,Guanwei Sun,Zhisheng Zhou,Qing Gu,Junrong Pu,Jiaji Yang,Jibin Zhang,Denghui Liu,Chenyang Shen,Jian Qing,Qifan Xue,Hin-Lap Yip,Dawei Di,Lintao Hou,Zhengjian Qi,Shi-Jian Su

DOI: https://doi.org/10.1002/adom.202201123

IF: 9

2022-01-01

Advanced Optical Materials

Abstract:Quasi‐2D perovskites show great promise for light‐emitting diodes owing to suppressed non‐radiative losses enabled by the energy funneling/cascading nanostructures. However, for red emission quasi‐2D perovskites, these ideal energy landscapes for efficient perovskite light‐emitting diodes (PeLEDs) can rarely be achieved due to detrimental aggregation of the low‐dimensional ligands in perovskite precursors, leading to poor device efficiency and stability. Here, a ligand‐modulated dimensionality control strategy is explored to achieve uniform phase distribution and reduce defect density for efficient light emission. In contrast to the model phenethylammonium iodide 2D ligand, the formation of small‐n phases can be inhibited by a structurally similar phenoxyethylammonium iodide ligand owing to the weakened aromatic stacking between ligands. Besides, the oxygen atoms can interact with the uncoordinated Pb2+ ions and promote the NI coordination in the perovskites, which greatly reduces the non‐radiative recombination defects in the ionic lattice. With this simple and effective approach, deep‐red quasi‐2D PeLEDs with record‐high external quantum efficiency of 21.6% and decent operational stability are achieved without the need for additional additives. These results highlight the potential of ligand‐modulated dimensionality control to achieve highly efficient and stable PeLEDs with a facile fabrication process.
Perovskite-molecule Composite Thin Films for Efficient and Stable Light-Emitting Diodes.

Heyong Wang,Felix Utama Kosasih,Hongling Yu,Guanhaojie Zheng,Jiangbin Zhang,Galia Pozina,Yang Liu,Chunxiong Bao,Zhangjun Hu,Xianjie Liu,Libor Kobera,Sabina Abbrent,Jiri Brus,Yizheng Jin,Mats Fahlman,Richard H. Friend,Caterina Ducati,Xiao-Ke Liu,Feng Gao

DOI: https://doi.org/10.1038/s41467-020-14747-6

IF: 16.6

2020-01-01

Nature Communications

Abstract:Although perovskite light-emitting diodes (PeLEDs) have recently experienced significant progress, there are only scattered reports of PeLEDs with both high efficiency and long operational stability, calling for additional strategies to address this challenge. Here, we develop perovskite-molecule composite thin films for efficient and stable PeLEDs. The perovskite-molecule composite thin films consist of in-situ formed high-quality perovskite nanocrystals embedded in the electron-transport molecular matrix, which controls nucleation process of perovskites, leading to PeLEDs with a peak external quantum efficiency of 17.3% and half-lifetime of approximately 100 h. In addition, we find that the device degradation mechanism at high driving voltages is different from that at low driving voltages. This work provides an effective strategy and deep understanding for achieving efficient and stable PeLEDs from both material and device perspectives.
Dual‐Functional Self‐Assembled Molecule Enabling High‐Performance Deep‐Blue Perovskite Light‐Emitting Diodes

Nan Li,Yu Xia,Yan‐Hui Lou,Yu‐Han Li,Run‐Jun Jin,Xiao‐Ying He,Chun‐Hao Chen,Jing Chen,Kai‐Li Wang,Zhao‐Kui Wang

DOI: https://doi.org/10.1002/adfm.202411227

IF: 19

2024-08-27

Advanced Functional Materials

Abstract:Using structural engineering and antisolvent treatment, highly efficient deep‐blue PeLEDs are successfully fabricated with an emission peak at 458 nm, achieving an external quantum efficiency (EQE) of up to 4.33%, and significantly reducing defect states. This study provides new insights into the application of self‐assembled monolayers (SAMs) in PeLEDs. Great efforts have been made to improve the composition and structure of perovskite light‐emitting diodes (PeLEDs) through methods such as dimensional reduction or halide engineering, thereby reducing non‐radiative recombination. However, deep‐blue PeLEDs still face a deep valence band issue. The mismatched energy level alignment between the perovskite and the hole transport layer (HTL) leads to charge accumulation, resulting in imbalanced carrier transport and injection. Herein, to address the issues of imbalanced carrier injection and defect states in PeLEDs, a deep‐blue perovskite emitter using [4‐(3,6‐Dimethyl‐9H‐carbazol‐9‐yl)butyl]phosphonic acid (Me‐4PACz) as the material to promote hole transport and passivate defects is presented. The stepwise energy level structure design can effectively reduce the hole injection barrier and improve the carrier injection efficiency. Additionally, the electron‐rich P═O bond can effectively passivate the unsaturated Pb2+ in perovskite, reducing non‐radiative recombination caused by defects. Ultimately, stable deep‐blue PeLEDs (≈458 nm) are successfully fabricated with an external quantum efficiency (EQE) of 4.33%. This study provides new insights into the application of self‐assembled monolayers (SAMs) in PeLEDs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Homogenizing Energy Landscape for Efficient and Spectrally Stable Blue Perovskite Light‐Emitting Diodes

Heng Qi,Yu Tong,Xuewen Zhang,Hao Wang,Lu Zhang,Yali Chen,Yibo Wang,Jingzhi Shang,Kun Wang,Hongqiang Wang

DOI: https://doi.org/10.1002/adma.202409319

IF: 29.4

2024-09-22

Advanced Materials

Abstract:Dual modification on both bulk and interface is proposed to homogenize the energy landscape throughout the entire blue perovskite by comprehensively diminishing the low dimensional phases and reducing the halide defects. Resultantly, perovskite light emitting diodes with spectrally‐stable blue emission at 478 nm and a high external quantum efficiency of 21.9% are realized, representing a record in this type of devices. Blue perovskite light‐emitting diodes (PeLEDs) have attracted enormous attention; however, their unsatisfactory device efficiency and spectral stability still remain great challenges. Unfavorable low‐dimensional phase distribution and defects with deeper energy levels usually cause energy disorder, substantially limiting the device's performance. Here, an additive‐interface optimization strategy is reported to tackle these issues, thus realizing efficient and spectrally stable blue PeLEDs. A new type of additive‐formamidinium tetrafluorosuccinate (FATFSA) is introduced into the quasi‐2D mixed halide perovskite accompanied by interface engineering, which effectively impedes the formation of undesired low‐dimensional phases with various bandgaps throughout the entire film, thereby boosting energy transfer process for accelerating radiative recombination; this strategy also diminishes the halide vacancies especially chloride‐related defects with deep energy level, thus reducing nonradiative energy loss for efficient radiative recombination. Benefitting from homogenized energy landscape throughout the entire perovskite emitting layer, PeLEDs with spectrally‐stable blue emission (478 nm) and champion external quantum efficiency (EQE) of 21.9% are realized, which represents a record value among this type of PeLEDs in the pure blue region.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Homogenizing Energy Landscape for Efficient and Spectrally Stable Blue Perovskite Light-Emitting Diodes

Heng Qi,Yu Tong,Xuewen Zhang,Hao Wang,Lu Zhang,Yali Chen,Yibo Wang,Jingzhi Shang,Kun Wang,Hongqiang Wang

DOI: https://doi.org/10.1002/adma.202409319

2024-09-20

Abstract:Blue perovskite light-emitting diodes (PeLEDs) have attracted enormous attention; however, their unsatisfactory device efficiency and spectral stability still remain great challenges. Unfavorable low-dimensional phase distribution and defects with deeper energy levels usually cause energy disorder, substantially limiting the device's performance. Here, an additive-interface optimization strategy is reported to tackle these issues, thus realizing efficient and spectrally stable blue PeLEDs. A new type of additive-formamidinium tetrafluorosuccinate (FATFSA) is introduced into the quasi-2D mixed halide perovskite accompanied by interface engineering, which effectively impedes the formation of undesired low-dimensional phases with various bandgaps throughout the entire film, thereby boosting energy transfer process for accelerating radiative recombination; this strategy also diminishes the halide vacancies especially chloride-related defects with deep energy level, thus reducing nonradiative energy loss for efficient radiative recombination. Benefitting from homogenized energy landscape throughout the entire perovskite emitting layer, PeLEDs with spectrally-stable blue emission (478 nm) and champion external quantum efficiency (EQE) of 21.9% are realized, which represents a record value among this type of PeLEDs in the pure blue region.
Interfacial Potassium‐Guided Grain Growth for Efficient Deep‐Blue Perovskite Light‐Emitting Diodes

Yang Shen,Kong‐Chao Shen,Yan‐Qing Li,Minglei Guo,Jingkun Wang,Yongchun Ye,Feng‐Ming Xie,Hao Ren,Xingyu Gao,Fei Song,Jian‐Xin Tang

DOI: https://doi.org/10.1002/adfm.202006736

IF: 19

2020-11-20

Advanced Functional Materials

Abstract:Perovskite light‐emitting diodes (PeLEDs) are emerging candidates for the applications of solution‐processed full‐color displays. However, the device performance of deep‐blue PeLED still lags far behind that of their red and green counterparts, which is largely limited by low external quantum efficiency (EQE) and poor operational stability. Here, a facile and reliable crystallization strategy for perovskite grains is proposed, with improved deep‐blue emission through rational interfacial engineering. By modifying the substrate with potassium cation (K+) as the supplier of heterogeneous nucleation seeds, the interfacial K+‐guided grain growth is realized for well‐packed perovskite assemblies with high surface coverage and the controlled crystal orientation, leading to the enhanced radiative recombination and hole‐transport capabilities. Synergistical boost in device performance is achieved for deep‐blue PeLEDs emitting at 469 nm with a peak EQE of 4.14%, a maximum luminance of 451 cd m–2, and spectrally stable color coordinates of (0.125, 0.076) that matches well with the National Television System Committee (NTSC) standard blue.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Regulated Perovskite Crystallization for Efficient Blue Light‐Emitting Diodes via Interfacial Molecular Network

Lu Wang,Zhen‐Huang Su,Yang Shen,Shi‐Chi Feng,Feng‐Ming Xie,Kai Zhang,Ke‐Fan Meng,Xingyu Gao,Jian‐Xin Tang,Yan‐Qing Li

DOI: https://doi.org/10.1002/adfm.202401297

IF: 19

2024-04-17

Advanced Functional Materials

Abstract:A multifunctional interface engineering by constructing a tetraethyl orthosilicate molecular network onto the grain‐growth substrate is developed to comprehensively regulate the crystallization dynamics and passivate the buried surface defects of mixed‐halide blue perovskite films, leading to spectrally stable and efficient blue light‐emitting diodes with an external quantum efficiency of 17.3%. Metal halide perovskite light‐emitting diodes (PeLEDs) are gaining increasing attention as a promising candidate for the new‐generation display technology. Although tremendous progress has been witnessed in this field, the device performance of blue PeLEDs still lags far behind that of the green and red counterparts. In this work, an effective interfacial engineering is employed to boost the radiative recombination of blue perovskite film by introducing a multifunctional tetraethyl orthosilicate (TEOS) network on the grain‐growth substrate. Benefitting from the strong interaction between the TEOS molecule and perovskite nuclei, the perovskite crystallization dynamics are effectively regulated, contributing to significantly improved emitting film with uniformly distributed halogen and concentrated low‐dimensional domain. Additionally, the TEOS network can distinctly passivate the crystal defects at the buried perovskite interface owing to its adequate electron‐donating sites. Consequently, the target blue PeLEDs featuring a stable emission peak at 488 nm exhibit a champion external quantum efficiency of 17.3%, which is among the highest values to date. The results demonstrate the critical role of the surface molecular characteristics of the grain‐growth substrate in regulating the mixed‐halide blue perovskite crystallization.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Synchronous Optimization of Light Outcoupling and Carrier Recombination for Efficient and Spectral Stable Blue Perovskite Light‐Emitting Diodes

Heng Qi,Hao Wang,Yali Chen,Lu Zhang,Jiandong Wu,Tianxiang Li,Wan Li,Kun Wang,Hongqiang Wang,Yu Tong

DOI: https://doi.org/10.1002/adfm.202400052

IF: 19

2024-02-27

Advanced Functional Materials

Abstract:Efficient and spectral stable blue perovskite light‐emitting diodes are fabricated via the synchronous optimization of light outcoupling and carrier recombination. The light outcoupling efficiency is enhanced due to the spontaneously formed undulant morphology, and radiative recombination is improved due to reduced low‐dimensional perovskite phase, suppressed nonradiative recombination, and accelerated energy transfer. Despite the significant progress of blue perovskite light‐emitting diodes (PeLEDs) in recent years, huge challenges still remain in improving their efficiency and spectral stability. In this work, a new strategy is reported to realize efficient and spectral stable blue PeLEDs through synchronously optimizing light outcoupling and carrier recombination of perovskite films. By introducing additives in both precursor solution and antisolvent, the crystallization of the perovskite films is regulated, leading to a spontaneous formation of undulant morphology, which favorably enhances the light outcoupling efficiency. Meanwhile, the formation of low‐dimensional perovskite phases is suppressed, in accompany with a reduced defect density and accelerated energy transfer, leading to a rapid concentration of excitons in the target perovskite phases and a significant enhancement of radiative carrier recombination. Resultantly, the optimized blue perovskite films show a high photoluminescent quantum yield approaching 80%, and the corresponding optimized PeLEDs show a high external quantum efficiency (EQE) of 11.88%, which significantly outperforms the control device with only 1.96%. Importantly, the optimized perovskite films and PeLEDs also exhibit improved spectral stability. This work provides a new pathway toward realizing efficient and spectral‐stable PeLEDs via simultaneously tackling the issues of light outcoupling and carrier recombination in the devices.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Co‐Interlayer Engineering for Homogenous Phase Quasi‐2‐D Perovskite and High‐Performance Deep‐Blue Light‐Emitting Diodes

Ning Zhou,Guangren Na,Dongyu Li,Zhengyan Jiang,Xiangtian Xiao,Hong Lin,Zhijun Zhang,Wallace C.H Choy

DOI: https://doi.org/10.1002/adom.202302273

IF: 9

2024-04-11

Advanced Optical Materials

Abstract:By incorporating 1‐cyclohexene‐1‐ethanamine cation into the host 1‐phenylbutylamine cation spacer and fabricating mixed‐cations quasi‐2D perovskites, a homogeneous phase distribution in quasi‐2D perovskite films is achieved through precise tuning of the phase formation energy. The resulting PeLEDs exhibit remarkable performance with an external quantum efficiency (EQE) of 5.8% at 467 nm. Organic and inorganic hybrid perovskites are a class of solution‐processable semiconductors that hold significant promise for light‐emitting diode applications. However, the development of efficient blue perovskite light‐emitting diodes (PeLEDs) has remained a critical challenge. Although significant advancements have been achieved in the development of sky‐blue PeLEDs, the performance of pure‐blue and deep‐blue PeLEDs still lags. In this manuscript, by incorporating 1‐cyclohexene‐1‐ethanamine cation (CEA+) into the host 1‐phenylbutylamine cation (PBA+) spacer and fabricating mixed‐cations quasi‐2D perovskites, a homogeneous phase distribution in quasi‐2D perovskite films is achieved through precise tuning of the phase formation energy. The resulting PeLEDs exhibit remarkable performance with an external quantum efficiency (EQE) of 5.8% at 467 nm, which is one of the highest EQEs among the deep‐blue light quasi‐2D PeLED devices with emission wavelengths below 470 nm, Additionally, the device demonstrates a half‐lifetime of ≈ 25 min. Furthermore, the PeLEDs utilizing mixed‐cation perovskite exhibit a stable electroluminescence (EL) spectrum under varying voltage biases, even when the chlorine content in the halogen sites reaches as high as 30%. Overall, this work offers a novel and promising avenue to achieve both high EQE and a stable EL spectrum in blue‐light quasi‐2D PeLEDs.

materials science, multidisciplinary,optics
Interfacial Nucleation Seeding for Electroluminescent Manipulation in Blue Perovskite Light‐Emitting Diodes

Yang Shen,Hai‐Yan Wu,Yan‐Qing Li,Kong‐Chao Shen,Xingyu Gao,Fei Song,Jian‐Xin Tang

DOI: https://doi.org/10.1002/adfm.202103870

IF: 19

2021-06-23

Advanced Functional Materials

Abstract:Efficient and stable blue emission of perovskite light-emitting diodes (PeLEDs) is a requisite toward their potential applications in full-color displays and solid-state lighting. Rational manipulation over the entire electroluminescence process is promising to break the efficiency limit of blue PeLEDs. Herein, a facile device architecture is proposed to achieve efficient blue PeLEDs for simultaneously reducing the energetic loss during electron-photon conversion and boosting the light outcoupling. Effective interfacial engineering is employed to manipulate the perovskite crystallization nucleation, enabling highly compact perovskite nanocrystal assemblies and suppressing the trap-induced carrier losses by means of interfacial hydrogen bonding interactions. This strategy contributes to a high external quantum efficiency (EQE) of 12.8% for blue PeLEDs emitting at 486 nm as well as improved operational stability. Moreover, blue PeLEDs reach a peak EQE of 16.8% with the incorporation of internal outcoupling structures for waveguided light, which can be further raised to 27.5% by integrating a lens-based structure for substrate-mode light. These results verify the validity of this strategy in producing efficient and stable blue PeLEDs for practical applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Deep-Blue Perovskite Light-Emitting Diodes Realized by a Dynamic Interfacial Ion Exchange

Muxue Zeng,Dan Chen,Junjie Wang,Danyang Li,Guangyao Xie,Jiaqi Ou,Lei Wang,Jian Wang

DOI: https://doi.org/10.1021/acsami.3c05253

IF: 9.5

2023-07-20

ACS Applied Materials & Interfaces

Abstract:The external quantum efficiency (EQE) of the sky-blue perovskite light-emitting diodes (PeLEDs) has reached 18.65%. However, the EQE of the deep-blue PeLEDs is still inferior to that of sky-blue PeLEDs, which restricts the PeLED application in displays. Herein, a novel dynamic interfacial ion-exchange technique is developed to obtain deep-blue PeLEDs. By spin-coating quaternary ammonium chloride on top of a quasi-2D green perovskite film, a 68 nm spectral transition from green light emission at...

materials science, multidisciplinary,nanoscience & nanotechnology
Color‐Stable Deep‐Blue Perovskite Light‐Emitting Diodes Based on Organotrichlorosilane Post‐Treatment

Guangruixing Zou,Zhenchao Li,Ziming Chen,Linghao Chu,Hin‐Lap Yip,Yong Cao

DOI: https://doi.org/10.1002/adfm.202103219

IF: 19

2021-08-08

Advanced Functional Materials

Abstract:Recent studies of sky-blue perovskite light-emitting diodes (PeLEDs) have extensively promoted optimal device design to achieve an external quantum efficiency (EQE) above 12%. However, the development of thin-film deep-blue PeLEDs lags dramatically behind, especially with regards to meeting the latest Rec. 2020 standard. A trichloro(3,3,3-trifluoropropyl) silane post-treatment that drives the emission of perovskite into the deep-blue region, ranging from 440 to 460 nm, which meets the Rec. 2020 standard, is proposed. The chlorine ions released from the organotrichlorosilane molecules during their polycondensation reaction provide an addition halide source to fine tune the composition of the mixed halide perovskite films, leading to increase of bandgap and deep-blue emission. In addition, hydrogen bonds between the hydroxy groups of silane molecules and halide anions in perovskite can suppress ion migration for improving emission stability. As a result, an optimal PeLED is developed with deep-blue emission at 458 nm and excellent color stability, which yields an EQE and luminance of 1.1% and 130 cd m−2, respectively, representing a state-of-the-art result for thin-film PeLEDs in this emission region. This work paves the way to achieve high-performance deep-blue PeLEDs with stable emissions to meet the demand for potential applications such as full-color display.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Highly Efficient Blue Light‐Emitting Diodes Based on Perovskite Film with Vertically Graded Bandgap and Organic Grain Boundary Passivation Shells

Lei Shu,Bing Han,Qianpeng Zhang,Swapnadeep Poddar,Daquan Zhang,Yu Fu,Yang‐Bryan Cao,Yucheng Ding,Yudong Zhu,Yuanjing Lin,Dai‐Bin Kuang,Jin‐Feng Liao,Zhiyong Fan

DOI: https://doi.org/10.1002/adfm.202306570

IF: 19

2023-09-02

Advanced Functional Materials

Abstract:The wavelength tunable pure and deep blue perovskite light‐emitting diodes with high external quantum efficiency (EQE) of 17.5% and 10.8% for emission wavelengths of 472 and 461 nm, respectively are presented. The wavelength tenability and high EQE are attributed to the unique vertically graded bandgaps and grain boundary organic shells in the perovskite films after PbCl2 doping. Metal halide perovskite materials have emerged as a promising class of semiconductors for high‐performance optoelectronic applications, particularly for light‐emitting diodes (LEDs), due to their high quantum efficiency, facile color tunability, narrow emission line widths, as well as cost‐effectiveness. Despite the great successes on green and red perovskite LEDs (PeLEDs), the external quantum efficiency (EQE) of blue PeLEDs still lags far behind that of green and red counterparts. Here, wavelength tunable pure and deep blue PeLEDs with high EQE are presented, achieving 17.5% and 10.8% for emission wavelengths of 472 and 461 nm, respectively. The wavelength tenability and high EQE are attributed to the unique vertically graded bandgaps and grain boundary organic shells in the perovskite films. The results demonstrate a significant performance improvement in blue PeLEDs, provide a novel route to fabricate high‐performance pure and deep blue PeLEDs that can match the performance of the green and red PeLEDs for future lighting and display applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Stabilized Low-Dimensional Species for Deep-Blue Perovskite Light-Emitting Diodes with EQE Approaching 3.4

Yu-Hang Zhou,Chenyue Wang,Shuai Yuan,Chen Zou,Zhenhuang Su,Yu Xia,Bin Wang,Dawei Di,Zhao-Kui Wang,Liang-Sheng Liao,Kai-Li Wang

DOI: https://doi.org/10.1021/jacs.2c07172

IF: 15

2022-09-28

Journal of the American Chemical Society

Abstract:Despite recent encouraging developments, achieving efficient blue perovskite light-emitting diodes (PeLEDs) have been widely considered a critical challenge. The efficiency breakthrough only occurred in the sky-blue region, and the device performance of pure-blue and deep-blue PeLEDs lags far behind those of their sky-blue counterparts. To avoid the negative effects associated with dimensionality reduction and excess chloride typically needed to achieve deep-blue emission, here we demonstrate...

chemistry, multidisciplinary
Thermodynamics-Induced Injection Enhanced Deep-Blue Perovskite Quantum Dot LEDs

Cheng Yan,Chao Luo,Wen Li,Xiaodong Peng,Jingjing Cao,Xiankan Zeng,Yue Gao,Xuehai Fu,Xiang Chu,Wen Deng,Fengjun Chun,Shiyu Yang,Qungui Wang,Weiqing Yang

DOI: https://doi.org/10.1021/acsami.1c16428

2021-11-23

Abstract:Precisely tuning emission spectra through the component control of mixed halides has been proved to be an efficient method for procuring deep-blue perovskite LEDs (PeLEDs). However, the inferior color instability and lifetime attenuation, originated from vacancy- and trap-mediated mechanisms under an external field, remain an uninterruptedly formidable challenge for the commercial development of PeLEDs. Here, an ultrafast thermodynamics-induced injection enhancement strategy was employed to promote efficient carrier recombination within perovskite quantum dots (QDs), accompanied by less inefficient charge accumulation and trap generation, enabling deep-blue PeLEDs with improved thermal and spectral stability. The resultant PeLEDs feature an external quantum efficiency (EQE) of 3.66%, a max luminance of 2100 cd/m2 at the electroluminescence (EL) of 460 nm, and a halftime of 288 s. This work provides a general platform for promoting the EL performances and a deep insight into unraveling the degradation mechanism of blue PeLEDs.

materials science, multidisciplinary,nanoscience & nanotechnology
Spectrally Stable Blue Light-Emitting Diodes Based on All-Inorganic Halide Perovskite Films

Huidan Zhang,Ying Su,Xulan Xue,Qinghui Zeng,Yifang Sun,Kai Zhu,Weiguang Ye,Wenyu Ji,Xiangyang Leng

DOI: https://doi.org/10.3390/nano12172906

2022-08-24

Abstract:Substantial progress has been made in perovskite light-emitting diodes (PeLEDs), but the fabrication of high-performance blue PeLEDs still remains a challenge due to its low efficiency, spectral instability and short operational lifetime. How to produce an efficient and stable blue PeLED is the key to realizing the application of PeLEDs in full-color displays. We herein report a blue PeLED usint the ligand-assisted reprecipitation method, in which phenylethylammonium bromide (PEABr) was used as ligands, and chloroform was used as anti-solvent to prepare blue perovskite nanocrystal films. By increasing the PEABr content from 40% to 100% (The ratio of x% PEABr refers to the molar ratio between PEABr and PbBr2), the film quality is highly improved, and the emission exhibits a blue shift. Introducing a poly(9-vinylcarbazole) (PVK) hole transport layer into the device, the PVK layer can not only achieve efficient hole injection, but can also isolate the PEDOT: PSS layer to inhibit the non-radiative recombination of metal halide luminescence layer, reduce surface ion defects and successfully inhibit halide atom migration. Finally, the PeLED presents a stable electroluminescence under different driving voltages without any red shift.
Buried interface modification and light outcoupling strategy for efficient blue perovskite light-emitting diodes

Shuxin Wang,Zhiqiu Yu,Jiajun Qin,Guoyi Chen,Yongjie Liu,Shuaiwei Fan,Chao Ma,Fang Yao,Hongsen Cui,Shun Zhou,Kailian Dong,Qianqian Lin,Chen Tao,Feng Gao,Weijun Ke,Guojia Fang

DOI: https://doi.org/10.1016/j.scib.2024.05.028

2024-07-30

Abstract:Perovskite light-emitting diodes (PeLEDs) exhibit remarkable potential in the field of displays and solid-state lighting. However, blue PeLEDs, a key element for practical applications, still lag behind their green and red counterparts, due to a combination of strong nonradiative recombination losses and unoptimized device structures. In this report, we propose a buried interface modification strategy to address these challenges by focusing on the bottom-hole transport layer (HTL) of the PeLEDs. On the one hand, a multifunctional molecule, aminoacetic acid hydrochloride (AACl), is introduced to modify the HTL/perovskite interface to regulate the perovskite crystallization. Experimental investigations and theoretical calculations demonstrate that AACl can effectively reduce the nonradiative recombination losses in bulk perovskites by suppressing the growth of low-n perovskite phases and also the losses at the bottom interface by passivating interfacial defects. On the other hand, a self-assembly nanomesh structure is ingeniously developed within the HTLs. This nanomesh structure is meticulously crafted through the blending of poly-(9,9-dioctyl-fluorene-co-N-(4-butyl phenyl) diphenylamine) and poly (n-vinyl carbazole), significantly enhancing the light outcoupling efficiency in PeLEDs. As a result, our blue PeLEDs achieve remarkable external quantum efficiencies, 20.4% at 487 nm and 12.5% at 470 nm, which are among the highest reported values. Our results offer valuable insights and effective methods for achieving high-performance blue PeLEDs.
Synergistical Electroluminescent Manipulation for Efficient Blue Perovskite Light-Emitting Diodes Through Interfacial Nucleation Seeding

Hai-Yan Wu,Yang Shen,Yan-Qing Li,Kong-Chao Shen,Jian-Xin Tang

DOI: https://doi.org/10.48550/arXiv.2012.03172

2020-12-06

Abstract:The low efficiency of metal halide perovskite light-emitting diodes (PeLEDs) with blue emission block their potential applications in large-area full-color displays and solid-state lighting. A delicate control over the entire electroluminescence process is indispensable to overcome the efficiency limitations of blue PeLEDs. Here, we demonstrate an efficient device architecture to synergistically reduce the energetic losses during electron-photon conversion and boost the extraction of trapped light in the device. An interfacial nucleation seeding scheme is proposed to control the crystallization process of highly emissive perovskite nanocrystals and suppress the trap-mediated non-radiative recombination losses due to interfacial hydrogen bonding interactions. This manipulation results in a record external quantum efficiency (EQE) of 12.8% for blue PeLEDs emitting at 486 nm, along with the improved spectral stability and operation lifetime. Additionally, the maximum EQE reaches 16.8% after combining an internal outcoupling structure without spectral distortion, which can be further raised to 27.5% when using a lens-based structure on top of the device. We anticipate that our work provides an effective method for its application in high-performance PeLEDs.

Applied Physics,Materials Science,Optics
Efficient Deep-Blue Light-Emitting Diodes Through Decoupling of Colloidal Perovskite Quantum Dots

Kyung Yeon Jang,Shin Young Hwang,Seung-Je Woo,Eojin Yoon,Chan-Yul Park,Seo Young Kim,Dong-Hyeok Kim,Hyeree Kim,Jinwoo Park,Edward H Sargent,Tae-Woo Lee

DOI: https://doi.org/10.1002/adma.202404856

2024-08-07

Abstract:Metal halide perovskite light-emitting diodes (PeLEDs) have exceptional color purity but designs that emit deep-blue color with high efficiency have not been fully achieved and become more difficult in the thin film of confined perovskite colloidal quantum dots (PeQDs) due to particle interaction. Here it is demonstrated that electronic coupling and energy transfer in PeQDs induce redshift in the emission by PeQD film, and consequently hinder deep-blue emission. To achieve deep-blue emission by avoiding electronic coupling and energy transfer, a QD-in-organic solid solution is introduced to physically separate the QDs in the film. This physical separation of QDs reduces the interaction between them yielding a blueshift of ≈7 nm in the emission spectrum. Moreover, using a hole-transporting organic molecule with a deep-lying highest occupied molecular orbital (≈6.0 eV) as the organic matrix, the formation of exciplex emission is suppressed. As a result, an unprecedently high maximum external quantum efficiency of 6.2% at 462 nm from QD-in-organic solid solution film in PeLEDs is achieved, which satisfies the deep-blue color coordinates of CIEy < 0.06. This work suggests an important material strategy to deepen blue emission without reducing the particle size to <≈4 nm.
Spectrally Stable Deep‐Blue Perovskite Light‐Emitting Diodes Enabled by a Deep Eutectic Solvent

Yong‐Wen Zhang,Ji‐Yang Chen,Long Zhao,Tingting Cui,Wan‐Yi Tan,Yonggang Min

DOI: https://doi.org/10.1002/adom.202300343

IF: 9

2023-08-04

Advanced Optical Materials

Abstract:An effective strategy to afford efficient deep‐blue perovskite light‐emitting diodes (PeLEDs) with stable electroluminescence (EL) spectra is developed via a kind of deep eutectic solvent as the perovskite precursor solvent additive. Full‐color LED display requires Commission Internationale de l'Eclairage (CIE) 1931 coordinates of (0.14, 0.08), based on the National Television Standards Committee (NTSC) blue standard. However, such deep‐blue perovskite light‐emitting diodes (PeLEDs) still lag far behind in terms of device efficiency. Moreover, spectral stability remains a big challenge. To settle these issues, a kind of deep eutectic solvent (DES) is introduced as the perovskite precursor solvent additive, which is formed from a hydrogen bond acceptor (HBA) choline chloride and a hydrogen bond donor (HBD) urea via the hydrogen bond interaction. The incorporation of DES has multiple advantages, shown as follows: 1) improves the solubility of CsCl to yield dense perovskite morphology, 2) inhibits the growth of the perovskite crystal to achieve low‐n phases with narrow distribution, and 3) stabilizes the halide anions in the lattice to ensure stable electroluminescence (EL) spectra. As a result, the as‐prepared PeLED shows the maximum external quantum efficiency (EQEmax) of 2.71% with a CIE coordinate of (0.134, 0.055). With the increase in the DES concentration, the spectra stability is also obviously enhanced.

materials science, multidisciplinary,optics

Determination of Residual Stress Distributions in Polycrystalline Alumina using Fluorescence Microscopy.

Deep‐Red Perovskite Light‐Emitting Diodes with External Quantum Efficiency Exceeding 21% Enabled by Ligand‐Modulated Dimensionality Control

Perovskite-molecule Composite Thin Films for Efficient and Stable Light-Emitting Diodes.

Dual‐Functional Self‐Assembled Molecule Enabling High‐Performance Deep‐Blue Perovskite Light‐Emitting Diodes

Homogenizing Energy Landscape for Efficient and Spectrally Stable Blue Perovskite Light‐Emitting Diodes

Homogenizing Energy Landscape for Efficient and Spectrally Stable Blue Perovskite Light-Emitting Diodes

Interfacial Potassium‐Guided Grain Growth for Efficient Deep‐Blue Perovskite Light‐Emitting Diodes

Regulated Perovskite Crystallization for Efficient Blue Light‐Emitting Diodes via Interfacial Molecular Network

Synchronous Optimization of Light Outcoupling and Carrier Recombination for Efficient and Spectral Stable Blue Perovskite Light‐Emitting Diodes

Co‐Interlayer Engineering for Homogenous Phase Quasi‐2‐D Perovskite and High‐Performance Deep‐Blue Light‐Emitting Diodes

Interfacial Nucleation Seeding for Electroluminescent Manipulation in Blue Perovskite Light‐Emitting Diodes

Deep-Blue Perovskite Light-Emitting Diodes Realized by a Dynamic Interfacial Ion Exchange

Color‐Stable Deep‐Blue Perovskite Light‐Emitting Diodes Based on Organotrichlorosilane Post‐Treatment

Highly Efficient Blue Light‐Emitting Diodes Based on Perovskite Film with Vertically Graded Bandgap and Organic Grain Boundary Passivation Shells

Stabilized Low-Dimensional Species for Deep-Blue Perovskite Light-Emitting Diodes with EQE Approaching 3.4

Thermodynamics-Induced Injection Enhanced Deep-Blue Perovskite Quantum Dot LEDs

Spectrally Stable Blue Light-Emitting Diodes Based on All-Inorganic Halide Perovskite Films

Buried interface modification and light outcoupling strategy for efficient blue perovskite light-emitting diodes

Synergistical Electroluminescent Manipulation for Efficient Blue Perovskite Light-Emitting Diodes Through Interfacial Nucleation Seeding

Efficient Deep-Blue Light-Emitting Diodes Through Decoupling of Colloidal Perovskite Quantum Dots

Spectrally Stable Deep‐Blue Perovskite Light‐Emitting Diodes Enabled by a Deep Eutectic Solvent