Internal Erosion Monitoring with a Rowe Cell Type Compression–breakthrough–bender Element Column
Bate, Bate,Chen, Xiao,Chen, Jiakai,Sun, Meng,Li, Jinlong,Zhang, Shuai,Zhang, Fengshou,Zhan, Liangtong,Cao, Junnan
DOI: https://doi.org/10.1007/s11440-021-01413-4
2021-01-01
Acta Geotechnica
Abstract:A Rowe cell type compression-breakthrough-bender element column (CBB column) was developed to simulate and monitor the internal erosion process of glass bead (GB) and salt grain (GB-NaCl) mixtures with salt contents of 5% and 34% by weight. Dry samples of GB-NaCl mixtures were compressed up to 100 kPa and were then flushed with de-ionized water. Salt dissolution left voids within the GB pore space, which facilitated the transportation of solid particles in an internal erosion scenario. Shear wave velocities (Vs) in three orthogonal directions (vh, hh, and hv) of GB-NaCl mixtures were measured with bender elements. A salt content of 34% yielded a Vs of 430–500 m/s for the GB-NaCl mixture, which is significantly higher than that of pure GB (160–205 m/s). A major drop of Vs occurred before the 1st pore volume (PV) of de-ionized water, after which only a minor reduction of Vs occurred until a stable value, ranging from 75 to 250 m/s, was reached. From an empirical equation by a previous study which is based on the pore fluid concentration and the undissolved salt mass in the samples, 8.9% and 38.7% of the total salt were flushed away at the end of the 1st PV for GB mixtures with 34% and 5% salt content, respectively. The presence of salt grains induced cone-to-plane contact in the GB-salt mixtures during compression. As salt dissolved completely, Hertzian contacts were observed in hh and hv directions as suggested by the β coefficient (ranging from 0.16 to 0.19), and a more complicated contact pattern in direction vh was postulated.