Abstract:The main objective of this study was to develop the treatment system to change wastewater into a reliable source of recyclable water within the textile plant. Therefore, a highly polluted industrial wastewater originated in the dyeing of cotton was subjected to a multi-step treatment. The raw wastewater was characterized by the concentration of Reactive Black 5, the azo dye, as high as 842 mg/L, extreme alkalinity (pH 11.26) and salinity (NaCl concentration 52,290 mg/L). Correspondingly, the chemical oxygen demand (COD) was equal to 3440 mg/L and the total organic carbon (TOC) was 1790 mg/L in this wastewater. This salty, hardly degradable wastewater underwent the electrocoagulation (EC) on an industrial scale in the first step of the treatment. Although the industrial EC resulted in 84% of color removal in a very short time of 8 min, the wastewater was still characterized by an extremally high absorbance which corresponded to 100 mg/L of RB5. Moreover, EC resulted in the occurrence of burdensome by-products, of which one was identified in this study as an aniline derivative. The by-products contributed to high residual COD and TOC after EC (2120 mg/L and 1052 mg/L, respectively). Consequently, the catalytic ozonation was used by us as a second, the polishing, step of the treatment. The catalytic ozonation was found efficient in the removal of the residual color and colorless by-products. The wastewater after catalytic ozonation was colorless and the final COD and TOC decreased to 1283 and 695 mg/L, respectively. The average oxidation state (AOS), spectra analysis, and the toxicity assay showed catalytic ozonation efficient in the by-products oxidation. Consequently, the catalytic action of activated carbon (AC) was proved for the ozonation of textile wastewater. Ultimately, the recycling of purified wastewater into dyeing resulted in a very good color quality of textile samples (DECMC values below limiting value equal to 1.0).

Anodic oxidation as promoting technology for treatment and reuse of industrial textile effluent using ruthenium-doped lead dioxide (PbO2) anode

ELECTROCHEMICAL TREATMENT OF RECIRCULATING AQUACULTURE WASTEWATER USING A Ti/RuO2-IrO2 ANODE FOR SYNERGETIC TOTAL AMMONIA NITROGEN AND NITRITE REMOVAL AND DISINFECTION

Using Ti/Ti0.7Ru0.3O2 anode-type with a Flow Cell System for the Electrochemical Treatment of a Tannery Wastewater

Electrochemical Degradation of Textile Effluent Using PbO 2 Electrode in Tube Electrolyzer

Sequential electrochemical oxidation and bio-treatment of the azo dye congo red and textile effluent

Electrochemical decolorization of methyl red by RuO2-IrO2-TiO2 electrode and biodegradation with Pseudomonas stutzeri MN1 and Acinetobacter baumannii MN3: An integrated approach

Synthesis of PbOx to Graphite Felt Anodes to Improve the Electro-Assisted Catalytic Wet Air Oxidation of Oxygen Species for Efficient Dye Degradation

Treatment of Tannery Wastewater by Electrochemical Oxidation Process

Development of an environmentally sustainable technique to minimize the sludge production in the textile effluent sector through an electrokinetic (EK) coupled with electrooxidation (EO) approach

Exploring the intensifying effect of periodate/hydroxylamine oxidation process for the effective mineralization of textile dyes effluents with consideration of environmental matrices

Electrochemical oxidation of palm oil mill effluent using platinum as anode: Optimization using response surface methodology

Synthesis of PbO x to graphite felt anodes to improve the electro-assisted catalytic wet air oxidation of oxygen species for efficient dye degradation

Catalytic ozonation of textile wastewater as a polishing step after industrial scale electrocoagulation

Electrochemical Treatment of a Real Textile Wastewater Using Cheap Electrodes and Improvement in Cod Removal

Reuse of Textile Dyeing Wastewater Treated by Electrooxidation

Chemical composition and direct electrochemical oxidation of table olive processing wastewater using high oxidation power anodes

Preparation of Porous Ti/RuO2-IrO2@Pt, Ti/RuO2-TiO2@Pt and Ti/Y2O3-RuO2-TiO2@Pt Anodes for Efficient Electrocatalytic Decomposition of Tetracycline

How to improve lead dioxide anodes performance in organic wastewater treatment: Review and prospect

Preparation of Ruthenium Metal Oxide Coated Anodes for Antifouling of Electrolyzing Seawater and Evaluation of Their Performance

Removal of acid red dye 1 from textile wastewater by heterogenous photocatalytic ozonation employing titanium dioxide and iron zeolite

Sequential photo electro oxidation and biodegradation of textile effluent: Elucidation of degradation mechanism and bacterial diversity