Abstract:The power supply mode is a non-negligible character in electrochemical process. Constant current mode is used in the traditional electrodeposition preparation process of PbO2 electrode, and there are very few studies on its electrodeposition power supply mode. In this paper, two non-traditional power supply modes (linear increase power supply mode and linear decrease power supply mode) were used to fabricate PbO2 electrodes, and the properties of prepared electrodes were compared with those of the traditional constant current power supply mode. On the premise of improving the electrode properties, the non-traditional power supply mode also significantly reduced the energy consumption of the electrodeposition process of PbO2. After material characterization (Scanning electron microscope, X-ray diffraction), electrochemical characterization (Electrochemical impedance spectroscopy, linear sweep voltammetry etc.) and stability test, it can be seen that the electrode surface prepared by the non-traditional power supply mode was spherical particles and its average grain size was smaller than that of the traditional one. The PbO2 electrode prepared by linear increase power supply mode had higher oxygen evolution overpotential (1.962 V), more active sites, smaller membrane impedance (33.15 ohm) and better stability (accelerated life up to 125.1 h). In the electrocatalytic oxidation tests of the three electrodes, the PbO2 electrode prepared by linear increase mode had the best performance in decolorization rate, Chemical oxygen demand removal rate, average current efficiency and energy consumption. Owing to favorable effects obtained, non-traditional power supply mode could be considered a promising alternative for PbO2 electrode preparation and applied electrochemical process for wastewater treatment.

How to improve lead dioxide anodes performance in organic wastewater treatment: Review and prospect

Electrochemical Degradation of Antibiotic Enoxacin Using a Novel PbO2 Electrode with a Graphene Nanoplatelets Inter-Layer: Characteristics, Efficiency and Mechanism.

Improvement of lead dioxide electrode for the application in the electrochemical treatment of biorefractory organic wastewater

Preparation and characterization of PbO₂ electrode and its application in electro-catalytic degradation of o-aminophenol in aqueous solution assisted by CuO-Ce₂O₃/γ-Al₂O₃ catalyst.

Recent progress in engineering approach towards the design of PbO2-based electrodes for the anodic oxidation of organic pollutants

Long Life Modified Lead Dioxide Anode for Organic Wastewater Treatment: Electrochemical Characteristics and Degradation Mechanism

Anodic oxidation of organic pollutants: Anode fabrication, process hybrid and environmental applications

Electrochemical Anodic Materials Used for Degradation of Organic Pollutants

Magnetic Field Assisted Electrocatalytic Oxidation of Organic Pollutants in Electroplating Wastewater

Electrochemical Oxidation for the Degradation of Organic Pollutants on A Novel Pbo2 Anode

Non-traditional power supply mode: Investigation of electrodeposition towards a better understanding of PbO2 electrode for electrochemical wastewater treatment

Base-metal Oxide Semiconductor Electrodes for PPCP Degradation: Ti-doped Α-Fe2o3 for Sulfosalicylic Acid Oxidation As an Example.

Anodic oxidation for the degradation of organic pollutants: Anode materials, operating conditions and mechanisms. A mini review

Research on the Treatment of Nitrobenzene Wastewater by Electrolysis on a Novel Lead Dioxide Anode

Performance and doped mechanism of a novel PbO_2 anode

Recent advancements in modified SnO2-Sb electrodes for electrochemical treatment of wastewater

Embedding wasted hairs in Ti/PbO2 anode for efficient and sustainable electrochemical oxidation of organic wastewater

Enhanced Degradation of Organic Wastewater Containing P-Nitrophenol by A Novel Wet Electrocatalytic Oxidation Process: Parameter Optimization and Degradation Mechanism

The integration of PbO2-based EAOPs with other advanced oxidation processes for improved treatment of water and wastewater

A Novel Advanced Oxidation Process—wet Electro-Catalytic Oxidation for High Concentrated Organic Wastewater Treatment

Research on the treatment of organic dyeing wastewater by a novel lead dioxide electrode