Abstract:Cu2SnS3 (CTS), a typical ternary copper-based sulfide, is considered as a potential p-type thermoelectric (TE) material with the advantages of environmental friendliness and low cost, but its performance is limited by the high lattice thermal conductivity and electrical resistivity. Herein, we have successfully synthesized undoped and In-doped CTS nanoparticles with a pure tetragonal phase by the colloidal method. More interestingly, plenty of twin boundaries appear in all the samples sintered from the synthesized nanoparticles independent of composition. The twin boundaries can effectively reduce the lattice thermal conductivity, while the tetragonal phase is beneficial to meliorate the electrical performance of CTS. Consequently, the highest zT reaches 0.36 at 700 K for Cu2Sn0.85In0.15S3, which is enhanced by 17 times compared to that of the pristine CTS with mainly the monoclinic phase. The tunable phase and microstructure via the colloidal method provide useful guidance to promote the performance of eco-friendly TE sulfides.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c01483.Lattice thermal conductivity (κl) calculation; observed, calculated, and difference Rietveld refined XRD patterns for Cu2Sn1–xInxS3 (x = 0, 0.05, 0.1, 0.15, and 0.25) samples; SEM images under different magnifications of the Cu2Sn0.85In0.15S3-sintered sample; temperature dependence of electrical conductivity, Seebeck coefficient, PF of Cu2Sn0.85In0.15S3 ("brm" stands for before reversible measurement, "arm" stands for after reversible measurement); XRD patterns of Cu2Sn0.85In0.15S3; calculated band structures of In-doped t-CTS (Cu2Sn0.75In0.25S3); low-magnification TEM image, HRTEM image of Cu2SnS3; structural data (position, occupancies, Biso, and bond distances) of m-CTS, t-CTS, and c-CTS; and carrier concentration of Cu2Sn1–xInxS3 (x = 0, 0.05, 0.1, 0.15, and 0.25) samples (PDF)This article has not yet been cited by other publications.

Accelerating the Discovery of Cu–Sn–S Thermoelectric Compounds via High-Throughput Synthesis, Characterization, and Machine Learning-Assisted Image Analysis

Data-driven Discovery of High-Performance Multicomponent Solid Solution Thermoelectric Materials

Discovery of High-Performance Thermoelectric Copper Chalcogenide Using Modified Diffusion-Couple High-Throughput Synthesis and Automated Histogram Analysis Technique

Facile Synthesis of Monodisperse Cu3SbSe4 Nanoparticles and Thermoelectric Performance of Cu3SbSe4 Nanoparticle-Based Materials

Thermoelectric Properties of Non-Stoichiometric Cu2+xSn1-xS3 Compounds

Phase Composition Manipulation and Twin Boundary Engineering Lead to Enhanced Thermoelectric Performance of Cu 2 SnS 3

Enhancing thermoelectric performance of Cu1.8S by Sb/Sn co-doping and incorporating multiscale defects to scatter heat-carrying phonons

Enhanced Thermoelectric Properties of Earth-Abundant Cu2sns3 Via in Doping Effect

Realized High Power Factor and Thermoelectric Performance in Cu3SbSe4

High Thermoelectric Performance of Cu-Doped PbSe-PbS System Enabled by High-Throughput Experimental Screening

Co-precipitation Synthesis of Sn And/or S Doped Nanostructured Cu3Sb1−xSnxSe4−ySy with a High Thermoelectric Performance

The Synthesis and Investigation of Thermoelectric Properties of Cu4SnS4 at Elevated Temperatures

Advancing thermoelectric materials discovery through semi-supervised learning and high-throughput calculations

High Thermoelectric Performance in Cu2SnS3 by Control Over Phase‐Dependent Mobility Edge

Hierarchically Structured Thermoelectric Materials in Quaternary System Cu–Zn–Sn–S Featuring a Mosaic-type Nanostructure

Phase Tuning for Enhancing the Thermoelectric Performance of Solution-Synthesized Cu 2– x S

Dense twin and domain boundaries lead to high thermoelectric performance in Sn-doped Cu 3 SbS 4

Investigations on Electrical and Thermal Transport Properties of Cu2SnSe3 with Unusual Coexisting Nanophases

Co-precipitation synthesis of nanostructured Cu3SbSe4 and its Sn-doped sample with high thermoelectric performance

Multiscale architectures boosting thermoelectric performance of copper sulfide compound

Chemical Bonding Engineering for High-Symmetry Cu2S-based Materials with High Thermoelectric Performance