Abstract:CO2 capture in the spray tower using aqueous ammonia solution has been proved a potential approach for the post-combustion CO2 capture. To improve the performance of spray absorption, a new three-dimensional numerical model integrating the complex gas-liquid hydrodynamics and the chemistry of the NH3-CO2-H2O system has been proposed and developed in this paper. In the model, the gas-liquid hydrodynamics was simulated using the Euler-Lagrange method, while the chemistry of the NH3-CO2-H2O system, including both thermodynamic and kinetic characteristics, was modeled using user-defined modules implemented in the CFD package. Moreover, a laboratory scale spray absorption system was built, and run under various operating conditions were carried out in order to validate the model developed. Subsequently, the predicted results using different kinetic models were compared with the experimental results. It was found the model using Liu's kinetics showed a better agreement with the experiments, especially when the liquid temperature and NH3 concentration of solution vary. Furthermore, the validated model was used to study the fundamentals of spray absorption. It has been found that the gas temperature profile as well as gaseous CO2 and NH3 concentration profile depends on the velocity field, indicating the hydrodynamics should be considered when optimizing the design of reactor. It has also been found that the residence time of droplets increases with the increase of gas flow rate, leading to an increase in average droplets temperature and CO2 loading, while the increase of ammonia concentration of solution could significantly improve the overall CO2 mass transfer coefficient. When the solution temperature increases from 293 K to 303 K, the overall CO2 mass transfer coefficient gradually increases, resulting in CO2 removal efficiency improvement. However, when the solution temperature increases from 303 K to 313 K, the promotion of reverse reaction leads to the reduction of CO2 removal efficiency. In addition, the increase of ammonia solution flow rate would mainly increase the interphase area and promote both CO2 absorption and NH3 escape. The model developed in this paper can be used to optimize the design and operation of such reactors in practice.

Modeling and simulation of a wetted-wall column for SO 2 absorption with aqueous ammonia solution

MODELLING AND SIMULATION OF CARBONATION PROCESS OF AMMONIACAL BRINE Ⅱ THE REACTOR/CRYSTALLIZER MODEL OF CARBONATION COLUMNS

Modeling for the Absorption of SO2 in Flue Gas with Landfill Leachate Coupled with Desorption of Ammonia

Numerical Simulation of Aqueous Ammonia-Based CO2 Absorption in a Sprayer Tower: an Integrated Model Combining Gas-Liquid Hydrodynamics and Chemistry

Modeling and Analysis of CO2 Capture by Aqueous Ammonia + Piperazine Blended Solution in a Spray Column

Simulation of SO2 absorption and performance enhancement of wet flue gas desulfurization system

A Multicomponent Droplet Model in Simulating Mass Transfer of the Ammonia-based Spray Process

Modeling and experimental studies on chemical absorption of sulphur dioxide with ethylenediamine-phosphoric acid solution in a θ-ring packed tower for purification of flue gas

Simulation Study of Wall Film Desulphurization of Spray Tower

A study of experimental and improved absorption model for the spray towers of wet flue gas desulfurization

Experimental Study and Rate-Based Modeling on Combined CO2 and SO2 Absorption Using Aqueous NH3 in Packed Column

CFD Simulation with Enhancement Factor of Sulfur Dioxide Absorption in the Spray Scrubber

Mass transfer characteristics in double-contact-flow absorber with liquid column/screen flow type: Modeling and experiment

Modeling of Mass Transfer Characteristics of Bubble Column Reactor with Surfactant Present

Numerical simulation research of flow field in ammonia-based wet flue gas desulfurization tower

Simultaneous Absorption of SO2 and CO2 from Flue Gas Using Aqueous Ammonia

3D Simulation of Sintering Flue Gas Desulfurization and Denitration in a Bubbling Gas Absorbing Tower

Mass Transfer and Reaction Process of the Wet Desulfurization Reactor with Falling Film by Cross-Flow Scrubbing

Simulation and optimization of ammonia-based flue gas desulfurization process

A Nonequilibrium Stage Model to Simulate the Chemical Absorption of SO2

A Numerical Study of the Ammonia Desulfurization in the Spray Scattering Tower