Abstract:Advances in Structural Engineering, Ahead of Print. According to ACI 318-19(SI), in the plastic hinge zone of RC beams, the longitudinal reinforcement at each corner and every other longitudinal reinforcement must be enclosed by the corner of the closed hoop or the hooks of crossties. However, in RC construction practice, the longitudinal reinforcement of RC beams is densely arranged, making construction difficult. In this study, four large RC beam specimens were designed and fabricated to conduct experiments to verify the effect of hoop spacing and crosstie configuration on the cyclic performance of reinforced concrete beams. It is found that: (1) The crosstie configuration with seismic hook engaging the longitudinal reinforcement at the bottom is recommended and that during construction, within the range of twice the beam depth from the RC column outer face, the bottom and side formwork should be completed after the crossties are assembled, which should solve the problem of difficult construction. (2) The transverse reinforcement spacing between 4 and 6 times the smallest longitudinal reinforcement diameter of RC beams may have no significant effect on the cyclic performance of RC beams. (3) The requirement that in the plastic hinge zone of RC beams, every corner and alternate longitudinal bar on the perimeter must have lateral support provided by the corner of a tie or crosstie in ACI 318-19(SI) may not have a major impact on the cyclic performance of the RC beam. (4) The ultimate drift angle of each specimen in the negative direction was between 4.3% rad and 4.5% rad; thus, all the specimens satisfied the ACI requirement. However, the cyclic performance (plasticity rotation angle) of all specimens basically did not meet the requirement of 3.0% rad for earthquake-resistant structures.

Experimental investigation on seismic behavior of eccentric RC beams with different reinforcement configurations

Seismic Behavior of High Strength Concrete Beams

Experimental research on seismic behavior of concrete-filled reactive powder concrete tubular columns

Experimental Evaluation of Steel Beam Bolted to Reinforced Concrete Column Connections

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Experimental investigation on the effect of hoop spacing and crosstie configuration on the cyclic performance of reinforced concrete beams

Experimental and Numerical Investigations on Seismic Behavior of RC Beam to PVC-CFRP Confined Concrete Column Exterior Joint with Steel Tube Connector

A Design Proposal for Concrete Cover Separation in Beams Strengthened by Various Externally Bonded Tension Reinforcements

Experimental study on the reinforced concrete beams with varied stirrup reinforcement ratio under static and impact loads

Experimental Study on Seismic Behavior of Concrete Columns with Central Reinforcement

Experimental investigation on seismic performance of plain engineered cementitious composite beams

Experimental Investigation on Bending Behavior of Existing RC Beam Retrofitted with SMA-ECC Composites Materials

Seismic Performance of Large-Scale RC Eccentric Corner Beam-Column-Slab Joints Strengthened with CFRP Systems

EXPERIMENTAL RESEARCH ON MECHANICAL BEHAVIOR OF LATTICED CIRCULAR TUBES REINFORCED CONCRETE T-SHAPED COLUMNS

Development and seismic performance evaluation of New high strength reinforced concrete column and steel beam (New-RCS) joint

Experimental Study on Serviceable Performance for Steel Reinforced Concrete Beam

EXPERIMENTAL INVESTIGATION ON CYCLIC PERFORMANCE OF CFST COLUMN-RC BEAM JOINTS ENCLOSED BY REBARS

Seismic Behavior of Exterior RC Beam-Column Joints Retrofitted using CFRP Sheets

Experimental and numerical investigation on the reinforced concrete boundary beam-wall system subjected to axial compression

Experimental Investigation of RC Beam-Slab Substructures Against Progressive Collapse Subject to an Edge-Column-removal Scenario

Experimental Investigation of the Seismic Behavior of Reinforced Concrete Beam to Concrete-Filled Steel Tube Column Connections