Abstract:<p>This paper experimentally investigates the effect of the yield strength of longitudinal steel bars and concrete compressive strength on the seismic performance of reinforced concrete (RC) bridge piers. Cyclic loading tests of ten large scale RC bridge piers (including five circular section and five rectangular section) with different longitudinal steel bars grades (varying among HRB335, HRB500E and HRB600) and concrete compressive strengths (i.e., 32.6 MPa and 48.2 MPa) were conducted. Two different steel replacement methods, i.e. equivalent volume and equivalent strength replacements, were adopted for comparison. The seismic performance indexes lateral bearing capacity, deformation capacity, hysteretic energy dissipation and residual displacement were compared and analyzed. The test results indicate that all RC bridge piers show typical flexural failure mode while circular piers show better deformability and hysteretic energy dissipation than rectangular piers. Replacing conventional steel bars HRB335 with same amount of high-strength longitudinal steel bars (HRB500E and HRB600) (i.e. equivalent volume replacement) will increase the lateral bearing capacity (as expected), the yield displacement and the total deformation. Due to the increase in yield displacement, the displacement ductility, the viscous damping ratio and the residual displacement will reduce to some extent. Still, the RC piers reinforced with high-strength steel bars (HSSB) show larger plastic deformation and hysteretic energy dissipation because of greater total deformation and bearing capacity. The transverse reinforcement configurations of circular section provide better restraint to the buckling of longitudinal steel bars than rectangular section, thereby RC bridge piers with circular section show better deformability and hysteretic energy dissipation than rectangular section. The increase in concrete compressive strength reduces the yield displacement, thus enhances the hysteretic energy dissipation and viscous damping ratio at same total deformation. It is worth noting that the effect of concrete compressive strength on the seismic performance of rectangular section is more remarkable than circular section. Replacing conventional longitudinal steel bars with reduced amounts of high-strength steel bars (i.e. equivalent strength replacement) provided comparable flexural strength and deformation capacity, but reducing the residual displacement and hysteretic energy dissipation.</p>

Experimental investigation on the effect of hoop spacing and crosstie configuration on the cyclic performance of reinforced concrete beams

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Impact Behavior of Unbonded Post-Tensioned Concrete Beams

Experimental Study On Seismic Behavior Of Innovative Multi-Cellular Cft-Walls With Tie-Bolts

Impact Testing of Reinforced Concrete Beams Shear-Strengthened with Fiber-Reinforced Polymer Wraps

Experimental investigation on seismic behavior of eccentric RC beams with different reinforcement configurations

Experimental study on the reinforced concrete beams with varied stirrup reinforcement ratio under static and impact loads

Experimental study on axial compressive behavior of short concrete columns confined with hoops and crossties

Reinforcement methods of an reinforced concrete beam with the circular opening in the plastic hinge region under cyclic loading

Cyclic behavior and analysis of steel plate reinforced concrete coupling beams with a span-to-depth ratio of 2.5

Cyclic Loading Behaviors of Novel RC Beams with Kinked Rebar Configuration

EXPERIMENTAL INVESTIGATION ON CYCLIC PERFORMANCE OF CFST COLUMN-RC BEAM JOINTS ENCLOSED BY REBARS

Cyclic Behaviour of Deep Reinforced Concrete Coupling Beams

Behaviour of Reinforced Concrete Beams With Circular Transverse Openings Under Static Loads

Effect of Volume Tie Ratio in the Engineered Cementitious Composites Plastic Hinges on the Seismic Performance of RC Composite Bridge Columns

Experimental and Numerical Investigations on Seismic Behavior of RC Beam to PVC-CFRP Confined Concrete Column Exterior Joint with Steel Tube Connector

Experimental and numerical investigation of the hysteretic behavior of reinforced concrete column-steel beam interior joints under low seismic intensity levels

Experimental investigation of circular tubed RC beam-column joint with high longitudinal reinforcement ratio under axial compression

Effect of reinforcement grade and concrete strength on seismic performance of reinforced concrete bridge piers

Experimental investigation on seismic performance of plain engineered cementitious composite beams

Experimental study on seismic performance of concrete composite beams reinforced with overlapping hoops