Abstract:In this study, the energy absorption characteristics and deformation modes of AA6061-T6 thin-walled rectangular tube are investigated experimentally and numerically under different crushing conditions, including axial crushing, three-point bending and oblique crushing. Mechanical tests are carried out on four specimens of uniaxial tension, uniaxial compression, shear and plane strain tension along different loading directions for AA6061-T6. Besides, the effect of differential hardening behavior on the energy absorption prediction of AA6061-T6 rectangular tubes is illustrated by comparing Lou2022, von Mises and SY2009 functions. The mechanical experiment results indicate that AA6061-T6 shows obvious anisotropy, differential hardening behavior and tension-compression asymmetry, and its plastic evolution is accurately characterized by the Lou2022 model. The axial crushing properties show that the AA6061-T6 thin-walled rectangular tube undergoes the progressive symmetrical folding deformation mode. The introduction of geometric discontinuity can obviously reduce the peak force and improve the crashworthiness performances under the axial load. The main crushing mode is bending with a small amount of indentation for three-point bending. Moreover, the three-point bending simulation shows that the Lou2022 function considering differential hardening behavior has the highest simulation accuracy. Three different oblique crushing simulations of 10∘ , 20∘ and 30∘ illustrate that the AA6061-T6 rectangular tube at 10∘ mainly occurs progressive folding deformation. while the other two oblique crushing angles undergo global buckling deformation. The total energy absorption at 10∘ is 1.87 and 2.43 times of that at 20∘ and 30∘ , respectively. The crushing force efficiency of 20∘ and 30∘ is 41.28% and 31.8% lower than that of 10∘ , respectively. A comprehensive understanding of the energy absorption performance of AA6061-T6 thin-walled rectangular tube under different crushing conditions is helpful to determine its position and shape as a vehicle safety structure, and to exert its optimal plastic deformation potential to dissipate the collision energy and ensure passenger safety.

Oblique compression of square tubes with walls of different thicknesses

Square tubes with graded wall thickness under oblique crushing

Experimental study and capacity analysis of double-tapered rectangular steel tubes

Energy absorption of axially compressed thin-walled square tubes with patterns

Lateral Compression Behaviors of Thin-Walled Equilateral Triangular Tubes

Energy Absorption of Thin-Walled Circular Tubes with Gradient Thickness under Oblique Loads

Quasi-static Axial Compression of Thin-Walled Tubes with Different Cross-Sectional Shapes

Energy absorption performance of hybrid cross section tubes under oblique loads

Effects of differential hardening on energy absorption prediction of AA6061-T6 thin-walled rectangular tube

Quasi-static crushing behaviors and plastic analysis of thin-walled triangular tubes

Experimental investigation on axial compression behaviour of cold-formed thick-walled steel tubes

Enhancing Energy Absorption of Circular Tubes under Oblique Loads Through Introducing Grooves of Non-Uniform Depths

Analysis of the carrying capacity for tubes under oblique loading

Theoretical and numerical study on axial crush of new extruded multi-cell tube

Quasi-Static Axial Compression of Triangular Steel Tubes

Arranging the Plastic Hinges and Improving the Strength of Steel Tubes with Tapered Ends: Analysis and Tests

Energy Absorption of Thin-Walled Square Tubes With a Prefolded Origami Pattern—Part I: Geometry and Numerical Simulation

Frusta structure designing to improve quasi-static axial crushing performances of triangular tubes

Optimization for Bending Collapse of Thin-Walled Twelve Right-Angle Section Tubes with Variable Thickness

Buckling suppression of a thin-walled Miura-origami patterned tube.

An Analytical Study for Global Buckling of Circular Tubes under Axial and Oblique Compression