Abstract:In this study, we present the use of a Ni-Cu alloy electrodeposited on a titanium electrode as a sensor for non-enzymatic glucose oxidation. Electrochemical parameters such as bath composition, potential, and deposition times used to obtain the films were studied. After optimization of operating conditions, the morphology, chemical composition, and surface structure of the Ni-Cu alloy electrodes were characterized using scanning electron microscopy (SEM) coupled with energy dispersive X-ray (EDX) and X-ray diffraction spectroscopy (XRD). Electrocatalytic activity of the modified Ni-Cu electrodes towards non-enzymatic glucose oxidation was then evaluated by cyclic voltammetry and chronoamperometric and impedance spectroscopy. The experimental impedance data were fitted with an equivalent circuit model representing the electrode/electrolyte interface, to evaluate the charge transfer rate as well as the electrical characteristics of the catalytic surface. Cyclic voltammetry experiments show that the Ni-Cu films prepared at − 0.975 V for 10 min significantly generated the highest oxidation current, extended linear responses for glucose concentrations in the range of 0.25 to 8 mM, with excellent values of the limit of detection (LOD, 4.97 μM) and sensitivity ( 546 μA mM −1 cm −2 ). Effects of endogenous interfering species (ascorbic acid (AA), uric acid (UA), oxalic acid, fructose, sucrose, NaCl, and KNO 3 ) on the electrocatalytic response of Ni-Cu/Ti were also studied and showed that Ni-Cu/Ti is a selective electrocatalyst towards glucose oxidation. The application of Ni-Cu/Ti biosensor in real human saliva and urine samples is demonstrated using chronoamperometric detection: the increase in current remains proportional to successive additions of glucose. Finally, it was shown that the Cu-Ni/Ti sensor presented the lowest charge transfer resistance ( R ct ) and the highest double layer capacitance values compared to those of the pure Ti, Ni/Ti, and Cu/Ti electrodes. The improved electrocatalytic activity is mainly attributed by the synergistic effect between Ni and Cu.

Effect of Pt-Ni deposition sequence on the bimetal-modified boron-doped diamond on catalytic performance for glucose oxidation in neutral media

Embedment of Well Dispersed Nickel Nanoparticles in Sulfonate and Benzimidazole Functionalized Poly (arylene Ether Ketone) Film for the Electrocatalytic Oxidation of Glucose

3D Porous Structured Polyaniline/reduced Graphene Oxide/copper Oxide Decorated Electrode for High Performance Nonenzymatic Glucose Detection

Improved Sensitivity and Selectivity Glucose Biosensor Based on PANI-GRA Nanocomposite Film Decorated with Pt Nanoparticles

Detection of glucose based on bimetallic PtCu nanochains modified electrodes.

Pt1/Ni6Co1 layered double hydroxides/N-doped graphene for electrochemical non-enzymatic glucose sensing by synergistic enhancement of single atoms and doping

Fabrication of Au/Ni/boron-doped diamond electrodes via hydrogen plasma etching graphite and amorphous boron for efficient non-enzymatic sensing of glucose

Decorating NiCo alloy nanosheet arrays with Pt nanoparticles on carbon paper for highly sensitive glucose sensing

Electrodeposition of Ni-Cu alloy electrodes in sulfate–citrate medium and their use for non-enzymatic glucose oxidation

Self-Supported 3D PtPdCu Nanowires Networks for Superior Glucose Electro-Oxidation Performance

Nonenzymatic sensing of glucose at neutral pH values using a glassy carbon electrode modified with graphene nanosheets and Pt-Pd bimetallic nanocubes

High performance of non-enzymatic glucose biosensors based on the design of microstructure of Ni2P/Cu3P nanocomposites

Nanocrystalline diamond modified gold electrode for glucose biosensing.

Ni-Coated Diamond-like Carbon-Modified TiO2 Nanotube Composite Electrode for Electrocatalytic Glucose Oxidation

Boosting the performance of enzyme-free biosensing system with Ni–Co bimetallic nanorod anchored on macroporous carbon composites for glucose monitoring

Nanostructured NiCu LDHs/Polypyrrole Nanotubes Composite for Nonenzymatic Glucose Sensing in Human Serum

Bipyridyl Ruthenium-Decorated Ni-MOFs on Carbon Nanotubes for Electrocatalytic Oxidation and Sensing of Glucose

Tunable Non-Enzymatic Glucose Electrochemical Sensing Based on the Ni/Co Bimetallic MOFs

Facile synthesis of 2D/3D hierarchical NiCu bimetallic MOF for non-enzymatic glucose sensor

3D NiCo-Layered double Hydroxide@Ni nanotube networks as integrated free-standing electrodes for nonenzymatic glucose sensing

MOF-Derived Porous Ni2P/Graphene Composites with Enhanced Electrochemical Properties for Sensitive Nonenzymatic Glucose Sensing