Abstract:Copolymerization of acrylonitrile (AN) and maleic anhydride was conducted by a water-phase precipitation copolymerization process (WPPCP) with K2S2O8–Na2SO3 as initiator system and the resultant copolymers were used to fabricate ultrafiltration hollow fiber membranes (UHFMs) by a dry–wet phase inversion method. Structures and properties for the UHFMs were studied by the analysis of scanning electron microscopy and the measurements of water permeation, bovine serum albumin (BSA) rejection and breaking strength. Compared with normal solution copolymerization, only poly(acrylonitrile-co-maleic acid)s (PANCMAs) could be obtained with WPPCP due to the hydrolysis of maleic anhydride, however, advantages of WPPCP including high monomer conversion and high copolymer molecular weight were obtained. It was found that increasing the molecular weight of PANCMA or the concentration of casting solution raised BSA rejection and mechanical strength but decreased water flux for the corresponding UHFMs. Membrane structures and properties could also be adjusted by adding additives such as poly(vinyl pyrrolidone) and poly(vinyl alcohol) (PVA) to the casting solution. Ternary phase diagrams of the membrane-forming systems and viscosity data of the casting solutions were used to characterize the characteristics of thermodynamics and diffusion kinetics for the membrane-forming systems. Most promisingly, it was found that the acid groups on membrane surface of PANCMA could be conveniently converted to more reactive anhydride groups by treating the membranes with acetic anhydride/pyridine mixture. Finally, the potentiality for the immobilization of poly(ethylene glycol) (PEG) on membrane surface by the reaction of PEG with anhydride groups to further improve the membrane properties was briefly indicated using Fourier-transform infrared spectroscopy (FT-IR), pure water contact angle and BSA adsorption measurements combining water permeation and BSA rejection determinations.

Charged Surface of Polyacrylonitrile Colloid and Its Application to N2/CO2 Separation

Propene/1-Alkene Copolymers As A Novel Membrane Material for O-2/N-2 Separation

Organic Solvent Nanofiltration with Nanoparticles Aggregation Based on Electrostatic Interaction for Molecular Separation

Aminated Substrate Based Thin Film Composite Nanofiltration Membrane with High Separation Performance by Chemically Inhibiting the Intrusion of Polyamide

Engineering the Pore Structure and Functionality of Ionic Porous Polymers for Separating Acetylene over Carbon Dioxide

Copolymer Membrane Preparation of 2-(N,n-dimethyl Aminoethylme) and Acrylonitrile and Its Gas Permeance Performance

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Applications of Polyacetylene Derivatives in Gas and Liquid Separation

The p- Diethanolaminomethylcalix[4]arene incorporated Polyacrylonitrile based facilitated transport nanofibers mat for O2/N2 Separation

Nanofibers Interpenetrating Network Mimicking “Reinforced-Concrete” to Construct Mechanically Robust Composite Membrane for Enhanced CO2 Separation

Surface Modifications of Nanofillers for Carbon Dioxide Separation Nanocomposite Membrane

Al2O3/poly acrylonitrile nanocomposite membrane: from engineering design of pores to efficient biological macromolecules separation

Bicontinuous porous membranes with micro-nano composite structure using a facile atomization-assisted nonsolvent induced phase separation method

Highly Polar but Amorphous Polymers with Robust Membrane CO2/N2 Separation Performance

High-Performance Polymers for Membrane Co2/N-2 Separation

Janus Polyacrylonitrile/Carbon Nanotube Nanofiber Membranes for Oil/Water Separation

Acrylonitrile-based Copolymers Containing Reactive Groups: Synthesis and Preparation of Ultrafiltration Membranes

Fabrication of polyarylate thin-film nanocomposite membrane based on graphene quantum dots interlayer for enhanced gas separation performance

The Preparation and Characterization of Novel Charged Polyacrylonitrile/pes-C Blend Membranes Used for Ultrafiltration

Back Cover: Uniformly Distributed Mixed Matrix Membranes via a Solution Processable Strategy for Propylene/Propane Separation

Novel PMDA-ODA Polyimide / Polystyrene Nanocomposite Membranes for Carbon Dioxide Separation