Abstract:Abstract In high angle wells, downhole tractors can be used for electric line (e-line) deployed toolstring conveyance. This paper presents the job design, planning, and execution of a rigless zonal isolation in a gas well located in the Gulf of Mexico. Downhole tractors were used as the method of conveyance during this zonal isolation. A deepwater direct vertical access gas well was suspected to have had a sand failure event. The well was assessed and identified to be a candidate for big-hole sidetrack (BHST). In preparation to the BHST, a zonal isolation was planned to be performed prior to the decomplete. This well is highly deviated with a maximum angle of 81.5 degrees. A downhole tractor was selected to be the method of conveyance for the required wireline operations. Due to well history, the wellbore was suspected to be obstructed by sand. Selection of mitigation methods to reduce the risk of sticking toolstring in sand fill is discussed. Methodology included the use of real-time video feedback to evaluate downhole condition, as well as the use of specific tension and release subs. Prior to execution System Integration Tests (SIT) were conducted between operator and service companies to ensure the e-line cable, tractors, and bottom hole assemblies (BHA) were fully compatible and operable. As part of the zonal isolation work, a downhole camera was deployed on tractor to observe the condition of the wellbore from SCSSV to proposed cut depth. A thru-tubing packer with blow-out plug was deployed on tractor and set on depth. A jet cutter was deployed on tractor and activated on depth. The zonal isolation job was completed without excessive tractor misruns. The job added significant value by reducing rig time needed for decomplete and accelerating well handover to Production. This case study demonstrates the capability of downhole tractor at deploying tools in a deep near-horizontal well, and downhole tractor’s compatibility with a variety of tools. Learnings relevant to the application of tractor conveyance are discussed.

System and method for controlling a downhole tractor

A kind of control system of telescopic downhole tractor based on hydraulic control

Design and Experiment on the Control System of Electro-hydraulic Plow Depth of Tractor Hydraulic Hitch Mechanism

Precision Versus Intelligence: Autonomous Supporting Pressure Balance Control for Slurry Shield Tunnel Boring Machines

Design and Construction of a Hydroelectric Drive Coiled Tubing Downhole Tractor

Electrohydraulic control system of opened TBM tunnel bottom slag removing device

Coordinated Control of Gripper and Thrust System for TBM Based on Construction Data

Theory and Realization of Supervision and Control System for Tunneling Machine

Supervisory Control of Thrust Hydraulic System for Shield Tunnelling Machine

Soft downhole tractor connected to the formula

Design of a Novel Electro-hydraulic Drive Downhole Tractor

Research on the Control System of Horizontal Well Tractor Driving Motor

Application of Downhole Tractor in Gas Well Zonal Isolation

Characteristics of Process of Surmounting Obstacles by Downhole Tractors in Horizontal Shafts

Design and Analysis of an Active Helical Drive Downhole Tractor

Mechanical Design of Downhole Tractor Based on Two-Way Self-locking Mechanism

Design and Simulation of Hydraulic Winch Tension Control for Trawler

Development of a Drilling Fluid Drive Downhole Tractor in Oil Field