Abstract:Reconfigurable optical add-drop filters in future intelligent and software controllable wavelength division multiplexing networks should support hitless wavelength switching and gridless bandwidth tuning. The hitless switching implies that the central wavelength of one channel can be shifted without disturbing data transmissions of other channels, while the gridless tuning means that the filter bandwidth can be adjusted continuously. Despite a lot of efforts, very few integrated optical filters simultaneously support the hitless switching of central wavelength and the gridless tuning of bandwidth. In this work, we demonstrate a hitless add-drop filter with gridless bandwidth tunability on the silicon-on-insulator (SOI) platform. The filter comprises the two identical multimode anti-symmetric waveguide Bragg gratings (MASWBG) which are connected to a loop. The phase apodization technique is utilized to weaken the intrinsic sidelobe interference of grating-based devices. By sequentially manipulating central wavelengths of the two MASWBGs with the thermo-optical effect, we can reconfigure the spectral response of the filter gridlessly and hitlessly. Specifically, the central wavelength of the device is shifted by 14.5 nm, while its 3 dB bandwidth is tuned from 0.2 nm to 2.4 nm. The dropping loss and the sidelobe suppression ratio (SLSR) are dependent on the bandwidth selected. Measured variation ranges of dropping loss and SLSR are from -1.2 dB to -2.5 dB and from 12.8 dB to 21.4 dB, respectively. The hitless wavelength switching is verified by a data transmission measurement at a bit rate of 25 Gbps.

MEMS tunable SOI waveguide Bragg grating filter with 1.3 THz tuning range for C-band 100 GHz DWDM optical network

Narrow-Band Add-Drop Filter Based on Cladding-Modulated Apodized Multimode Bragg Grating

Ultra-Broadband Optical Filter Based on Step-Chirped Multimode Waveguide Bragg Grating

Tunable MEMS-based metamaterial nanograting coupler for C-band optical communication application

Broadband Tunable Filter Based on the Loop of Multimode Bragg Grating.

Silicon Band-Rejection and Band-Pass Filter Based on Asymmetric Bragg Sidewall Gratings in A Multimode Waveguide

Birefringence compensated silicon nanowire arrayed waveguide grating for CWDM optical interconnects.

Narrow-band Add-Drop Filters Based on Silicon Nitride Multimode Waveguide Bragg Grating

Design and fabrication of 1 × 32 silica-based arrayed waveguide grating

Silica-Based Arrayed Waveguide Grating With Flattened Spectral Response Using A Multimode Interference Coupler

Hitless and Gridless Reconfigurable Optical Add Drop (de)multiplexer Based on Looped Waveguide Sidewall Bragg Gratings on Silicon

Inverse Design of High Extinction Ration Narrow-Band Filters Based on Silicon Nitride Multimode Waveguide Bragg Gratings

Compact Arrayed-Waveguide Grating on Silicon-On-Insulator with Integrated Waveguide Turning Mirrors

A Low Loss Band-Rejection And Band-Pass Filter Based On Silicon Photonic Multimode Bragg Gratings

High Performance Demonstration of a 16 × 16 Silica-based Cyclic Arrayed-Waveguide Grating Router

Widely Tunable Photonic Filter Based on Equivalent Chirped Four-Phase-Shifted Sampled Bragg Gratings

Birefringence compensated arrayed waveguide grating

Monolithic tunable lasers for low cost DWDM networks

Design and Fabrication of 8×8 Silica-Based Arrayed Waveguide Grating

Turning-Mirror-Integrated Arrayed-Waveguide Gratings on Silicon-on-Insulator

Dual-band Photonic Filters with Wide Tunable Range Using Chirped Sampled Gratings