Abstract:This work introduces a novel approach for restoring the lithium composition of spent LiΔNi0.6Co0.2Mn0.2O2 cathodes through spontaneous galvanic corrosion, utilizing an aluminum current collector at ambient temperature. The corrosion process provides a reduction power of 1.37 V (vs Li/Li+), sufficient for the lithiation of spent LiΔNi0.6Co0.2Mn0.2O2 cathodes, including recovery of the irreversible capacity loss from the initial cycle. The recycling of end‐of‐life Li‐ion batteries (EoL LIBs) is critical for maintaining the sustainable LIB industry. In this study, the compositional restoration method for degraded LiΔNi0.6Co0.2Mn0.2O2 cathode via spontaneous galvanic corrosion, which can be conducted at room temperature, is demonstrated. Achieving the lithiation of spent LiΔNi0.6Co0.2Mn0.2O2 to its pristine state at room temperature requires a strong reducing agent with a redox potential lower than 1.6 V (vs Li/Li+), which is very reactive and expensive. In the designed restoration system, spontaneous restoration can be achieved by using an Aluminum (Al) current collector as a reducing agent which has sufficient reducing power (Al/Al3+, 1.37 V (vs Li/Li+)). Moreover, through a galvanic reaction design that utilizes Li‐ion in the electrolyte of spent LIBs, the additional Li source required to replenish the Li‐deficient NCM is minimized. The galvanic corrosion‐based restoration mechanism is systematically analyzed, and a spent Li0.76Ni0.6Co0.2Mn0.2O2 is successfully restored to its pristine state (Li1.05Ni0.6Co0.2Mn0.2O2). Furthermore, restoration strategies accomplishable in not only the cathode state but also the battery state are presented to ensure applicability in practical recycling processes. The proposed strategy suggests a new insight into the direct cathode recycling technology, possessing economic feasibility, and environmental friendliness.

Reductive Dissolution of NCM Cathode through Anaerobic Respiration by Shewanella putrefaciens

Experimental Study on Recycling of Spent Lithium-Ion Battery Cathode Materials

Direct recycling of spent nickel-rich cathodes in reciprocal ternary molten salts

Resource recovery and regeneration strategies for spent lithium-ion batteries: Toward sustainable high-value cathode materials

Leaching of valuable metals from cathode active materials in spent lithium-ion batteries by levulinic acid and biological approaches

Resynthesis of Ni-rich lithium nickel manganese cobalt oxide cathode materials from the industrial leachate of spent Li-ion batteries: The effect of PF 6 − species from electrolyte

Direct Recycling of End-of-Life Lithium-Ion Battery Cathode Materials through Redox Mediator Chemistry

Achieving low-temperature hydrothermal relithiation by redox mediation for direct recycling of spent lithium-ion battery cathodes

Feasible route for the regeneration of cathode materials from spent lithium-ion batteries via reduction leaching and in-site precipitation

Redox Mediator Relithiation of End-of-Life Lithium-Ion Battery Cathode Materials

Direct Regeneration of Spent Li-Ion Battery Cathodes via Chemical Relithiation Reaction

Mechanisms of Thermal Decomposition in Spent NCM Lithium-Ion Battery Cathode Materials with Carbon Defects and Oxygen Vacancies

Reviving Spent NCM Cathodes via Spontaneous Galvanic Corrosion in Ambient Atmospheric Condition

Closed-loop recycling of spent lithium-ion batteries based on selective sulfidation: An unconventional approach

Scalable Direct Recycling of Cathode Black Mass from Spent Lithium‐Ion Batteries

Unraveling the Nature of Sulfide Ions in Hydrometallurgical Recycling of NCM622 Cathode Material

Enhanced electrochemical discharge of Li-ion batteries for safe recycling

Ecotoxicological assessment, oxidative response, and enzyme activity disorder of the rotifer Brachionus asplanchnoidis exposed to a toxic cocktail of spent lithium-ion battery leachate

Nondestructive flash cathode recycling

Enhanced reducing capacity of citric acid for lithium-ion battery recycling under microwave-assisted leaching

The Efficiency of Black Mass Preparation by Discharge and Alkaline Leaching for LIB Recycling