Abstract:The dislocation structure formation under low-amplitude fatigue in fcc metals for multislip loading conditions is investigated using three-dimensional discrete dislocation dynamics. Tools based on graph analysis, a statistical description of stable dislocation arrangements such as dislocation dipoles and prismatic loops are developed and applied. Upon decreasing the loading amplitude one order of magnitude below the persistent slip band threshold, although qualitative microstructural differences are seen, the elementary features of the investigated defects are the same. A critical number of cycles is required to produce sessile Lomer junctions that stabilize the structure and result in dislocation clustering around them. The crystallographic orientation of the crystal with respect to the loading axis results in different patterns strongly linked to sessile junctions, which are analyzed using spatial correlation functions. The increase in irreversible bulk dislocation arrangements results in roughening of the free surface and increase in surface step heights. Furthermore the crystallographic orientation with respect to the free surface is shown to control the dislocation density evolution combined with the macroscopic Schmid factor. Mechanical fatigue due to cyclic loading remains one of the most challenging problems in materials science. For fcc metals, low- and high cycle fatigue have been thoroughly studied experimentally [ 1 – 8 ]. Fatigue failure in fcc metals is found to be often due to surface roughening with increasing number of loading cycles, leading finally to stress concentration and eventually incipient crack initiation. It is well established that dislocations form persistent slip bands (PSBs) causing surface roughness [ 9 – 13 ]. Irreversible dislocation structures are composed primarily of dislocation dipoles and prismatic loops. Earlier in the 1960s several experimental groups investigated those elementary dislocation arrangements and discovered the important role of prismatic dislocation loops in strain hardening [ 14 , 15 ] and identified cross-slip as a necessary mechanism required for their formation [ 16 , 17 ]. Quantification of prismatic loops in terms of shape and type as well as more precise description of the formation mechanism were given by Feltner [ 18 , 19 ]. More recently, unexpected failure of technical applications in the very high cycle fatigue regime (VHCF) for more than 10 7 cycles and below the PSB-threshold caused to readdress the concept of fatigue limit. Ultrasonic- [ 20 ] and piezoelectric [ 21 , 22 ] modern fatigue testing facilities with loading frequencies up to 20 kHz were developed to investigate this problem. Similar to low cycle fatigue, it was shown by [ 23 , 24 ] that fatigue failure in polycrystalline copper in the VHCF-regime is due to cyclic strain localization within PSBs. Nonetheless, details and mechanisms of the microstructural behavior at the dislocation level remain unexplored. Since dislocation structure formation is controlled by geometrical dislocation arrangement due to elastic interactions between dislocations, the meso-scale simulation method discrete dislocation dynamics (DDD) gives detailed insight into the structure formation mechanisms. Furthermore the role of microstructural parameters, e.g. grain shape and orientation, on structure correlations is accessible. Several groups have used DDD under cyclic loading to explore the mechanisms leading to irreversible dislocation structure formation. A detailed analysis of single- and double slip loading conditions were given in [ 25 , 26 ]. It was shown that an initial single Frank–Read source can yield, due to annihilation and cross-slip processes only, a dipolar dislocation microstructure which shows good agreement with experiments. It was found that slip band spacing was inversely proportional to the square of the slip band thickness. The authors stress the role of cross-slip for strain localization and show that double slip conditions lead to more damage than single slip. Based on statistical distribution of dipole heights, the same group [ 27 ] derived a model which could reproduce precisely an experimental hysteresis loop. In [ 28 ] results using DDD showed the role of source position, character and length on prismatic loop development while molecular dynamics demo -Abstract Truncated-

純鉄多結晶体の繰返し疲労に伴うひずみの局所化と損傷形成素過程の結晶塑性解析

The Influence of Crystal Defects on the Elastic Properties of Tungsten Metals

Plastic Deformation Behavior During Unloading in Compressive Cyclic Test of Nanocrystalline Copper

Surface Relief Formation of Cyclic-Loaded Coarse-Grained Aluminum Polycrystals with Point Defect Clusters

Prediction of Static Recrystallization Nucleation Sites in Tensile Deformed Single Crystal Pure Iron through a Combination of In-Situ EBSD and CP-FEM

Atomic Modeling of the Segregation of Vacancies on 111 Dislocations in Α-Iron by Diffusive Molecular Dynamics Simulations

Size Effect on Cyclic Torsion of Micro-Polycrystalline Copper Considering Geometrically Necessary Dislocation and Strain Gradient

Analysis of dislocation microstructure characteristics of surface grains under cyclic loading by discrete dislocation dynamics

Effect of Deformation Rate on the Elastic-Plastic Deformation Behavior of GH3625 Alloy

Strain rate dependency of dislocation plasticity

Quantification of changes in lattice defect density in BCC iron during plastic deformation using electrical resistivity measurements

Atomic modeling of the segregation of vacancies on " open=" 111 dislocations in α-iron by diffusive molecular dynamics simulations

Microplasticity and yielding in crystals with heterogeneous dislocation distribution

Dislocation Starvation and Exhaustion Hardening in Mo Alloy Nanofibers

Stress-dependence of Dislocation Dissociation, Nucleation and Annihilation in Elastically Anisotropic Cu

The combined and interactive effects of orientation, strain amplitude, cycle number, stacking fault energy and hydrogen doping on microstructure evolution of polycrystalline high-manganese steels under low-cycle fatigue

Activation Volume and Density of Mobile Dislocations in Plastically Deforming Nanocrystalline Ni

Dislocation density-based plasticity model from massive discrete dislocation dynamics database

Mechanical Behaviour and the Evolution of the Dislocation Structure of Copper Polycrystal Deformed under Fatigue–tension and Tension–fatigue Sequential Strain Paths

Atomistic Simulation of Deformation Behaviors Polycrystalline CoCrFeMnNi High-Entropy Alloy under Uniaxial Loading

A micromechanical cracking imperfection model of edge dislocations generated by residual stresses